44 KiB

Raaka Blame Historia

Change Log

All notable changes to this project will be documented in this file.

The format is based on Keep a Changelog and this project adheres to Semantic Versioning.

[4.0.1] - 2017-06-09

Fixed

Fixes #87 - Can't open files in remote when using git@ urls (ssh)

[4.0.0] - 2017-06-09

Added

Adds all-new, beautiful, highly customizable and themeable, file blame annotations
- Can now fully customize the layout and content, as well as the theme
Adds all-new configurability and themeability to the current line blame annotations
- Can now fully customize the layout and content, as well as the theme
Adds all-new configurability to the status bar blame information
- Can now fully customize the layout and content
Adds all-new configurability over which commands are added to which menus via the gitlens.advanced.menus setting
Adds better configurability over where Git code lens will be shown -- both by default and per language
Adds an all-new changes (diff) hover annotation to the current line - provides instant access to the line's previous version
Adds Toggle Line Blame Annotations command (gitlens.toggleLineBlame) - toggles the current line blame annotations on and off
Adds Show Line Blame Annotations command (gitlens.showLineBlame) - shows the current line blame annotations
Adds Toggle File Blame Annotations command (gitlens.toggleFileBlame) - toggles the file blame annotations on and off
Adds Show File Blame Annotations command (gitlens.showFileBlame) - shows the file blame annotations
Adds Open File in Remote command (gitlens.openFileInRemote) to the editor/title context menu
Adds Open Repo in Remote command (gitlens.openRepoInRemote) to the editor/title context menu
Adds gitlens.strings.* settings to allow for the customization of certain strings displayed
Adds gitlens.theme.* settings to allow for the theming of certain elements
Adds gitlens.advanced.telemetry.enabled settings to explicitly opt-in or out of telemetry, but still ultimately honors the telemetry.enableTelemetry setting
Adds ability to suppress most warning messages - which can be re-enabled using the Reset Suppressed Warnings command (gitlens.resetSuppressedWarnings)

Changed

(BREAKING) Almost all of the GitLens settings have either been renamed, removed, or otherwise changed - see the README`
Changes the positioning of the Git code lens to try to be at the end of any other code lens on the same line
Changes the position of the Open File in Remote command (gitlens.openFileInRemote) in the context menus - now in the navigation group
Changes the Toggle Git Code Lens command (gitlens.toggleCodeLens) to always toggle the Git code lens on and off
Changes the default of gitlens.advanced.toggleWhitespace.enabled back to true, but automatically disables whitespace toggling if whitespace rendering is not on

Removed

Removes the on-demand trailing file blame annotations -- didn't work out and just ended up with a ton of visual noise
Removes Toggle Blame Annotations command (gitlens.toggleBlame) - replaced by the Toggle File Blame Annotations command (gitlens.toggleFileBlame)
Removes Show Blame Annotations command (gitlens.showBlame) - replaced by the Show File Blame Annotations command (gitlens.showFileBlame)

Fixed

Fixes #81 - Current line annotation feels too sticky
Fixes #83 - Calling "close unchanged files" results in no new files being openable
Fixes issues with the zone.js monkey patching done by application insights (telemetry) - disables all the monkey patching
Fixes issue with Open Branch in Remote & Open Repository in Remote not showing when there are no open editors

[3.6.1] - 2017-06-07

Fixed

Fixes issues with the zone.js monkey patching done by application insights (telemetry) - disables all the monkey patching

[3.6.0] - 2017-06-02

Added

Adds diff information (the line's previous version) into the active line hover
Adds a gitlens.diffWithWorking status bar command option - compares the current line commit with the working tree

Changed

Changes the behavior of the Compare File with Working Tree command (gitlens.diffWithWorking) - always does what it says :)
- Compares the current file with the working tree -- if the current file is the working file, it will show a File matches the working tree message
Changes the behavior of the Compare File with Previous command (gitlens.diffWithPrevious) - always does what it says :)
- Compares the current file with the previous commit to that file
Changes the behavior of the gitlens.diffWithPrevious status bar command option - compares the current line commit with the previous
Renames Compare File with Previous Commit command to Compare File with Previous
Renames Compare Line with Previous Commit command to Compare Line Commit with Previous
Renames Compare Line with Working Tree command to Compare Line Commit with Working Tree
Renames Compare with Previous Commit in quick pick menus to Compare File with Previous
Renames Compare with Working Tree in quick pick menus to Compare File with Working Tree

Fixed

Fixes #79 - Application insights package breaks GitLens + eslint

[3.5.1] - 2017-05-25

Changed

Changes certain code lens actions to be unavailable (unclickable) when the commit referenced is uncommitted - avoids unwanted error messages
Debounces more events when tracking the active line to further reduce lag

Fixed

Fixes #71 - Blame information is invalid when a file has changed outside of vscode
Fixes issue with showing the incorrect blame for versioned files (i.e. files on the left of a diff, etc)

[3.5.0] - 2017-05-24

Added

Improves performance
- Reduces the number of git calls on known "untrackables"
- Caches many more git commands to reduce git command roundtrips and parsing
- Increases the debounce (delay) on cursor movement to reduce lag when navigating around a file
Adds diff information (the line's previous version) into the active line hover when the current line is uncommitted
Adds gitlens.statusBar.alignment settings to control the alignment of the status bar -- thanks to PR #72 by Zack Schuster (@zackschuster)!
Adds Open Branch in Remote command (gitlens.openBranchInRemote) - opens the current branch commits in the supported remote service
Adds Open Repository in Remote command (gitlens.openRepoInRemote) - opens the repository in the supported remote service
Adds Stash Changes option to stashed changes quick pick menu -- no longer hidden behind the "gitlens.insiders": true setting
Adds Stash Unstaged Changes option to stashed changes quick pick menu -- no longer hidden behind the "gitlens.insiders": true setting
Adds Apply Stashed Changes command (gitlens.stashApply) to apply the selected stashed changes to the working tree -- no longer hidden behind the "gitlens.insiders": true setting
Adds Stash Changes command (gitlens.stashSave) to stash any working tree changes -- no longer hidden behind the "gitlens.insiders": true setting
Adds support to the Search commits command (gitlens.showCommitSearch) to work without any active editor
Adds commit search pre-population -- if there is an active editor it will use the commit sha of the current line commit, otherwise it will use the current clipboard

Changed

Changes Open File in Remote and Open Line Commit in Remote commands to actually work for everyone (part of their implementation was still behind the gitlens.insiders setting)
Changes the active line hover to only show at the beginning and end of a line if gitlens.blame.annotation.activeLine is both
Changes alt+f shortcut to alt+/ for the Search commits command (gitlens.showCommitSearch)
Changes alt+right on commit details quick pick menu to execute the Compare File with Previous Commit command (gitlens.diffWithPrevious) when a file is selected
Changes alt+right on repository status quick pick menu to execute the Compare File with Previous Commit command (gitlens.diffWithPrevious) when a file is selected
Refactors command argument passing to allow for future inclusion into the SCM menus

Fixed

Fixes #73 - GitLens doesn't work with Chinese filenames
Fixes #40 - Encoding issues
- Given the limitations of the vscode api, I'm unable to fix all the encoding issues, but many of them should now be squashed
- files.encoding is now honored for the cases where the encoding cannot currently be gleaned
Fixes incorrect file selection from the commit details quick pick menu
Fixes incorrect command execution when using "gitlens.statusBar.command": "gitlens.showQuickRepoHistory"
Fixes a bunch of issues that were revealed by enabling Typescript strict mode

[3.4.9] - 2017-05-03

Added

Adds better support for deleted files when choosing Open Changed Files via in quick pick menus - now opens the file revision from the previous commit
Adds better support for deleted files when using alt+right arrow shortcut on the commit details quick pick menu - now opens the file revision from the previous commit

Changed

Removes deleted files when choosing Open Working Changed Files via in quick pick menus

[3.4.8] - 2017-05-02

Changed

Changes display name in the marketplace to Git Lens because of the marketplace search ranking algorithm

[3.4.6] - 2017-05-01

Added

Adds better support for deleted files when choosing Open File via in quick pick menus - now opens the file revision from the previous commit
Adds better support for deleted files when choosing Open File in Remote via in quick pick menus - now opens the file revision from the previous commit
Improves performance by caching the git path to avoid lookups on every git command

Changed

Renames gitlens.advanced.codeLens.debug setting to gitlens.codeLens.debug
Renames gitlens.advanced.debug setting to gitlens.debug
Renames gitlens.output.level setting to gitlens.outputLevel

Fixed

Fixes incorrect file selection when showing commit details quick pick menu
Fixes timing error on startup

[3.4.5] - 2017-04-13

Added

Completely overhauls the GitLens documentation and messaging -- make sure to check it out to see all the powerful features GitLen provides!
Adds gitlens.blame.annotation.activeLineDarkColor & gitlens.blame.annotation.activeLineLightColor settings to control the colors of the active line blame annotation

Changed

Changes Toggle Git Code Lens command to work when gitlens.codeLens.visibility is set to auto (the default)
Renames Compare with... command to Compare File with...
Renames Compare with Next Commit command to Compare File with Next Commit
Renames Compare with Previous Commit command to Compare File with Previous Commit
Renames Compare with Previous Commit command to Compare File with Previous Commit
Renames Compare with Working Tree command to Compare File with Working Tree

Fixed

Fixes issue with Open Commit in Remote not working
Fixes issue with many commands missing from the Command Palette

[3.3.3] - 2017-04-10

Fixed

Fixes issue with newlines in commit messages in the file/branch/stash history quick pick menus (truncates and adds an ellipse icon)

[3.3.2] - 2017-04-10

Removed

Removes gitlens.blame.annotation.characters.* settings since they were added to deal with unicode bugs in a previous version of vscode

Fixed

Closes #63 - Switch commit message and author in commit pick list. Also reduces clutter in the commit quick pick menus

[3.3.1] - 2017-04-09

Changed

Changes commit search prefixes -- no prefix for message search, @ for author, : for file pattern, # for commit id
Changes sha terminology to commit id in the UI

Fixed

Fixes issues with author searching

[3.3.0] - 2017-04-09

Added

Adds Search commits command (gitlens.showCommitSearch) to allow commit searching by message, author, file pattern, or sha
Adds alt+f shortcut for the Search commits command (gitlens.showCommitSearch)
Adds Show Commit Search command to the branch history quick pick menu
Adds Show Stashed Changes command to the repository status quick pick menu
Adds a Don't Show Again option to the GitLen update notification

Changed

Changes Open x in Remote commands to be no longer hidden behind the gitlens.insiders setting

Fixed

Fixes #59 - Context menu shows gitlens commands even if folder/file is not under git

[3.2.1]

Fixed

Fixes #57 - No more blank message if diff.tool is missing

[3.2.0]

Added

Adds support for single files opened in vscode -- you are no longer required to open a folder for GitLens to work

Fixed

Fixes #57 - Warn on directory compare when there is no diff tool configured
Fixes #58 - Work with git sub-modules
Fixes issue with Open * in Remote commands with nested repositories and non-git workspace root folder

[3.1.0]

Added

Adds Show Stashed Changes command (gitlens.showQuickStashList) to open a quick pick menu of all the stashed changes
Adds insiders Stash Changes option to stashed changes quick pick menu -- enabled via "gitlens.insiders": true
Adds insiders Stash Unstaged Changes option to stashed changes quick pick menu
Adds insiders Apply Stashed Changes command (gitlens.stashApply) to apply the selected stashed changes to the working tree
Adds insiders Stash Changes command (gitlens.stashSave) to stash any working tree changes

Fixed

Fixes incorrect counts in upstream status

[3.0.5]

Added

Adds additional insiders support for GitLab, Bitbucket, and Visual Studio Team Services to the Open x in Remote commands and quick pick menus -- enabled via "gitlens.insiders": true
Adds insiders line support to Open File in Remote command (gitlens.openFileInRemote)
Adds original file name for renamed files to the repository status and commit details quick pick menu

Fixed

Fixes #56 - Handle file names with spaces

[3.0.4]

Changed

Changes telemetry a bit to reduce noise

Fixed

Fixes common telemetry error by switching to non-strict iso dates (since they are only available in later git versions)

[3.0.3]

Added

Adds a fallback to work with Git version prior to 2.11.0 -- terribly sorry for the inconvenience :(

Fixed

Fixes #55 - reverts Git requirement back to 2.2.0
Fixes issues with parsing merge commits

[3.0.2]

Changed

Changes required Git version to 2.11.0

[3.0.1]

Added

Adds basic telemetry -- honors the vscode telemetry configuration setting

[3.0.0]

Added

Adds insiders support for Open in GitHub to the relevant quick pick menus -- enabled via "gitlens.insiders": true
Adds insiders Open Line Commit in Remote command (gitlens.openCommitInRemote) to open the current commit in the remote service (currently only GitHub)
Adds insiders Open File in Remote command (gitlens.openFileInRemote) to open the current file in the remote service (currently only GitHub)
Adds an update notification for feature releases
Adds Show Branch History command (gitlens.showQuickBranchHistory) to show the history of the selected branch
Adds Show Last Opened Quick Pick command (gitlens.showLastQuickPick) to re-open the previously opened quick pick menu - helps to get back to previous context
Adds alt+- shortcut for the Show Last Opened Quick Pick command (gitlens.showLastQuickPick)
Adds upstream status information (if available) to the repository status pick pick
Adds file status rollup information to the repository status pick pick
Adds file status rollup information to the commit details quick pick menu
Adds Compare with... (gitlens.diffWithBranch) command to compare working file to another branch (via branch quick pick menu)
Adds branch quick pick menu to Directory Compare (gitlens.diffDirectory) command
Adds support for gitlens.showQuickFileHistory command execution via code lens to limit results to the code lens block
Adds current branch to branch quick pick menu placeholder
Adds Show Branch History command to the branch history quick pick menu when showing only limited commits (e.g. starting at a specified commit)
Adds Show File History command to the file history quick pick menu when showing only limited commits (e.g. starting at a specified commit)
Adds Don't Show Again option to the unsupported git version notification

Changed

Changes Show Repository History command to Show Current Branch History
Changes Repository History terminology to Branch History

Fixed

Fixes issue with gitlens.diffWithPrevious command execution via code lens when the code lens was not at the document/file level
Fixes issue where full shas were displayed on the file/blame history explorers
Fixes #30 - Diff with Working Tree fails from repo/commit quickpick list if file was renamed (and the commit was before the rename)
Fixes various other quick pick menu command issues when a file was renamed
Fixes various issues when caching is disabled
Fixes issues with parsing commits history
Fixes various issues with merge commits

[2.12.2]

Fixed

Fixes #50 - excludes container-level code lens from html and vue language files

[2.12.1]

Added

Adds gitlens.advanced.codeLens.debug setting to control whether or not to show debug information in code lens

Fixed

Fixes issue where gitlens.showQuickRepoHistory command fails to open when there is no active editor

[2.12.0]

Added

Adds progress indicator for the gitlens.showQuickFileHistory & gitlens.showQuickRepoHistory quick pick menus
Adds paging support to the gitlens.showQuickFileHistory & gitlens.showQuickRepoHistory quick pick menus
- Adds Show Previous Commits command
- Adds Show Next Commits command
Adds keyboard page navigation via alt+, (previous) & alt+. (next) on the gitlens.showQuickFileHistory & gitlens.showQuickRepoHistory quick pick menus
Adds keyboard commit navigation via alt+, (previous) & alt+. (next) on the gitlens.showQuickCommitDetails & gitlens.showQuickCommitFileDetails quick pick menus

Changed

Changes behavior of gitlens.showQuickFileHistory & gitlens.showFileHistory to no longer show merge commits
Changes gitlens.copyShaToClipboard to copy the full sha, rather than short sha
Changes internal tracking to use full sha (rather than short sha)

[2.11.2]

Added

Adds gitlens.diffWithNext command to open a diff with the next commit
Adds alt+. shortcut for the gitlens.diffWithNext command

Changed

Changes shift+alt+p shortcut to alt+, for the gitlens.diffWithPrevious command
Changes alt+p shortcut to shift+alt+, for the gitlens.diffLineWithPrevious command

Removed

Removes gitlens.toggleCodeLens from Command Palette when not available
Removes gitlens.toggleCodeLens shortcut key when not available

Fixed

Fixes (#45)[https://github.com/eamodio/vscode-gitlens/issues/45] - Keyboard Shortcut collision with Project Manager

[2.11.1]

Added

Adds blame and active line annotation support to git diff split view (right side)
Adds command (compare, copy sha/message, etc) support to git diff split view (right side)

Fixed

Fixes intermittent issues when toggling whitespace for blame annotations

[2.11.0]

Added

Adds gitlens.showQuickCommitFileDetails command to show a quick pick menu of details for a file commit
Adds gitlens.showQuickCommitFileDetails command to code lens
Adds gitlens.showQuickCommitFileDetails command to the status bar
Adds gitlens.closeUnchangedFiles command to close any editors that don't have uncommitted changes
Adds gitlens.openChangedFiles command to open all files that have uncommitted changes
Adds Directory Compare (gitlens.diffDirectory) command to open the configured git difftool to compare directory versions
Adds Directory Compare with Previous Commit command on the gitlens.showQuickCommitDetails quick pick menu
Adds Directory Compare with Working Tree command on the gitlens.showQuickCommitDetails quick pick menu
Adds a Changed Files grouping on the gitlens.showQuickCommitDetails quick pick menu
Adds a Close Unchanged Files command on the gitlens.showQuickRepoStatus quick pick menu
Adds a contextual description to the go back command in quick pick menus

Changed

Changes layout of the gitlens.showQuickRepoStatus quick pick menu for better clarity
Changes behavior of gitlens.showQuickCommitDetails to show commit a quick pick menu of details for a commit
Changes default of gitlens.codeLens.recentChange.command to be gitlens.showQuickCommitFileDetails (though there is no visible behavior change)
Renames Open Files to Open Changed Files on the gitlens.showQuickCommitDetails quick pick menu
Renames Open Working Files to Open Changed Working Files on the gitlens.showQuickCommitDetails quick pick menu
Renames Show Changed Files to Show Commit Details on the gitlens.showQuickCommitFileDetails quick pick menu
Renames Open Files to Open Changed Files on the gitlens.showQuickRepoStatus quick pick menu

Fixed

Fixes #44 by adding a warning message about Git version requirements
Fixes intermittent errors when adding active line annotations
Fixes intermittent errors when opening multiple files via quick pick menus

[2.10.1]

Fixed

Fixes #43 - File-level code lens isn't using the blame of the whole file as it should
Fixes issue with single quotes (') in annotations
Fixes output channel logging (also adds more debug information to code lens -- when enabled)

[2.10.0]

Added

Adds blame and active line annotation support to git diff split view
Adds command (compare, copy sha/message, etc) support to git diff split view

Fixed

Fixes startup failure if caching was disabled
Fixes missing Compare Line with Previous Commit context menu item
Fixes #41 - Toggle Blame annotations on compare files page
Fixes issue with undo (to a saved state) not causing annotations to reappear properly
Attempts to fix #42 - Cursor on Uncommitted message

[2.9.0]

Changed

To accomodate the realization that blame information is invalid when a file has unsaved changes, the following behavior changes have been made
- Status bar blame information will hide
- Code lens change to a Cannot determine... message and become unclickable
- Many menu choices and commands will hide

Fixed

Fixes #38 - Toggle Blame Annotation button shows even when it isn't valid
Fixes #36 - Blame information is invalid when a file has unsaved changes

[2.8.2]

Added

Adds gitlens.blame.annotation.dateFormat to specify how absolute commit dates will be shown in the blame annotations
Adds gitlens.statusBar.date to specify whether and how the commit date will be shown in the blame status bar
Adds gitlens.statusBar.dateFormat to specify how absolute commit dates will be shown in the blame status bar

Fixed

Fixes #39 - Add date format options for status bar blame

[2.8.1]

Fixed

Fixes issue where Compare with * commands fail to open when there is no active editor

[2.8.0]

Added

Adds new Open File command on the gitlens.showQuickCommitDetails quick pick menu to open the commit version of the file
Adds new Open File command on the gitlens.showQuickCommitDetails quick pick menu to open the commit version of the files
Adds alt+left keyboard shortcut in quick pick menus to go back
Adds alt+right keyboard shortcut in quick pick menus to execute the currently selected item while keeping the quick pick menu open (in most cases)
- alt+right keyboard shortcut on commit details file name, will open the commit version of the file

Changed

Indents the file statuses on the gitlens.showQuickCommitDetails quick pick menu
Renames Open File to Open Working File on the gitlens.showQuickCommitDetails quick pick menu
Renames Open File and Open Working Files on the gitlens.showQuickCommitDetails quick pick menu
Reorders some quick pick menus

Fixed

Fixes #34 - Open file should open the selected version of the file
Fixes some issue where some editors opened by the quickpick would not be opened in preview tabs
Fixes issue where copy to clipboard commands would fail if there was no active editor
Fixes issue where active line annotations would show for opened versioned files
Fixes issue where code lens compare commands on opened versioned files would fail

[2.7.1]

Added

Adds proper support for multi-line commit messages

Fixed

Fixes #33 - Commit message styled as title in popup, when message starts with hash symbol

[2.7.0]

Added

Adds file status icons (added, modified, deleted, etc) to the gitlens.showQuickCommitDetails quick pick menu
Adds Copy Commit Sha to Clipboard command to commit files quick pick menu
Adds Copy Commit Message to Clipboard command to commit files quick pick menu

Changed

Changes Show Commit History to Show File History on the gitlens.showQuickCommitDetails quick pick menu
Changes Show Previous Commit History to Show Previous File History on the gitlens.showQuickCommitDetails quick pick menu

Fixed

Fixes issue with repository status when there are no changes
Fixes issue with . showing in the path of quick pick menus
Fixes logging to clean up on extension deactivate

[2.6.0]

Added

Adds gitlens.showQuickRepoStatus command to show a quick pick menu of files changed including status icons (added, modified, deleted, etc)
Adds alt+s shortcut for the gitlens.showQuickRepoStatus command

[2.5.6]

Fixed

Fixes #32 - 00000000 Uncommitted changes distracting

[2.5.5]

Fixed

Fixes #25 - Blame information isn't updated after git operations (commit, reset, etc)

[2.5.4]

Fixed

Fixes extra spacing in annotations

[2.5.3]

Fixed

Fixes #27 - Annotations are broken in vscode insider build

[2.5.2]

Added

Adds Open File command to gitlens.showQuickCommitDetails quick pick menu
Adds Open Files command to gitlens.showQuickCommitDetails quick pick menu
Improves performance of git-log operations in gitlens.diffWithPrevious and gitlens.diffWithWorking commands

Changed

Changes Not Committed Yet author for uncommitted changes to Uncommitted

Fixed

Fixes showing gitlens.showQuickCommitDetails quick pick menu for uncommitted changes -- now shows the previous commit details

[2.5.1]

Added

Adds gitlens.copyMessageToClipboard command to copy commit message to the clipboard
Adds gitlens.copyMessageToClipboard to the editor content menu
Adds Copy Commit Message to Clipboard command to gitlens.showQuickCommitDetails quick pick menu

Changed

Changes behavior of gitlens.copyShaToClipboard to copy the sha of the most recent commit to the repository if there is no active editor
Changes behavior of gitlens.showQuickFileHistory to execute gitlens.showQuickRepoHistory if there is no active editor

Fixed

Fixes issue where shortcut keys weren't disabled if GitLens was disabled

[2.5.0]

Added

Overhauls the gitlens.showQuickRepoHistory, gitlens.showQuickFileHistory, and gitlens.showQuickCommitDetails quick pick menus
- Adds Show Repository History command to gitlens.showQuickFileHistory quick pick menu
- Adds Show Previous Commits History command to gitlens.showQuickCommitDetails quick pick menu
- Adds Show Commits History command to gitlens.showQuickCommitDetails quick pick menu
- Adds Copy Commit Sha to Clipboard command to gitlens.showQuickCommitDetails quick pick menu
- Adds Show Changed Files command to gitlens.showQuickCommitDetails quick pick menu
- Adds more robust go back navigation in quick pick menus
- Adds commit message to placeholder text of many quick pick menus
- Adds icons for some commands
Adds gitlens.diffWithPrevious command to the editor content menu
Adds gitlens.diffWithWorking command to the editor content menu
Adds gitlens.showQuickRepoHistory and gitlens.showQuickCommitDetails commands to code lens
Adds gitlens.showQuickRepoHistory and gitlens.showQuickCommitDetails commands to the status bar

Changed

Changes the default command of gitlens.codeLens.recentChange.command to gitlens.showQuickCommitDetails
Changes the default command of gitlens.statusBar.command to gitlens.showQuickCommitDetails
Changes behavior of gitlens.showQuickCommitDetails to show commit commands rather than file set (use Show Changed Files command to get to the file set)
Changes gitlens.diffWithPrevious command to behave as gitlens.diffWithWorking if the file has uncommitted changes
Renames gitlens.diffWithPrevious command from Diff Commit with Previous to Compare with Previous Commit
Renames gitlens.diffLineWithPrevious command from Diff Commit (line) with Previous to Compare Line with Previous Commit
Renames gitlens.diffWithWorking command from Diff Commit with Working Tree to Compare with Working Tree
Renames gitlens.diffLineWithWorking command from Diff Commit (line) with Working Tree to Compare Line with Working Tree

Fixed

Fixes issues with certain git commands not working on Windows
Fixes #31 - Disable gitlens if the project does not have .git folder
Fixes issue where quick pick menus could fail if there was no active editor
Fixes code lens not updating in response to configuration changes

[2.1.1]

Fixed

Fixes overzealous active line annotation updating on document changes

[2.1.0]

Added

Adds a new GitLens logo and changes all images to svg
Adds alt+p shortcut for the gitlens.diffLineWithPrevious command
Adds shift+alt+p shortcut for the gitlens.diffWithPrevious command
Adds alt+w shortcut for the gitlens.diffLineWithWorking command
Adds shift+alt+w shortcut for the gitlens.diffWithWorking command
Adds gitlens.copyShaToClipboard command to copy commit sha to the clipboard (#28)
Adds gitlens.showQuickCommitDetails command to show a quick pick menu of details for a commit
Adds go back choice to gitlens.showQuickCommitDetails, gitlens.showQuickFileHistory, and gitlens.showQuickRepoHistory quick pick menus
Adds gitlens.blame.annotation.highlight to specify whether and how to highlight blame annotations (#24)
Greatly improves performance of line navigation when either active line annotations or status bar blame is enabled

Fixed

Fixes #29 - Commit info tooltip duplicated for current line when blame is enabled
Fixes issue where sometimes the commit history shown wasn't complete
Fixes issues with gitlens.diffLineWithPrevious and gitlens.diffWithPrevious not following renames properly
Fixes issues with gitlens.diffLineWithPrevious and gitlens.diffWithPrevious not always grabbing the correct commit

[2.0.2]

Added

Adds auto-enable of whitespace toggling when using font-ligatures because of vscode issue
Adds gitlens.blame.annotation.characters.* settings to provide some control over how annotations are displayed

Fixed

Fixes #22 - Cannot read property 'sha' of undefined

[2.0.1]

Fixed

Fixes #26 - Active line annotation doesn't disappear properly after delete

[2.0.0]

Added

Adds gitlens.blame.annotation.activeLine to specify whether and how to show blame annotations on the active line
Adds full commit message (rather than just summary) to active line hover if gitlens.blame.annotation.activeLine is not off
Adds new trailing blame annotation style -- adds annotations after the code lines rather than before
Adds gitlens.blame.annotation.message to show the commit message in expanded and trailing blame annotation styles
Adds support for relative dates in blame annotations. Use gitlens.blame.annotation.date
Re-adds context menu for gitlens.diffLineWithPrevious -- since vscode issue
Re-adds context menu for gitlens.diffLineWithWorking -- since vscode issue

Changed

Changes the design of hover annotations -- much cleaner now
Disables automatic whitespace toggling by default as it is seemingly no longer needed as vscode issue seems fixed. It can be re-enabled with gitlens.advanced.toggleWhitespace.enabled

Fixed

Fixes issue where the status bar blame would get stuck switching between editors
Fixes issue where code lens aren't updated properly after a file is saved

[1.4.3]

Added

Adds some logging to hopefully trap #22 - Cannot read property 'sha' of undefined

Fixed

Fixes issue with the latest insiders build (1.9.0-insider f67f87c549) where there is a collision of document schemes

[1.4.2]

Fixed

Fixes issue where file history wouldn't compare correctly to working tree if the filename had changed

[1.4.1]

Added

Adds gitlens.advanced.gitignore.enabled to enable/disable .gitignore parsing. Addresses #20 - Nested .gitignore files can cause blame to fail with a repo within another repo

[1.4.0]

Added

Adds alt+h shortcut for the gitlens.showQuickFileHistory command
Adds shift+alt+h shortcut for the gitlens.showQuickRepoHistory command
Adds gitlens.advanced.maxQuickHistory to limit the number of quick history entries to show (for better performance); Defaults to 200
Adds gitlens.diffLineWithPrevious as alt context menu item for gitlens.diffWithPrevious
Adds gitlens.diffLineWithWorking as alt context menu item for gitlens.diffWithWorking
Adds gitlens.showFileHistory as alt context menu item for gitlens.showQuickFileHistory

Removed

Removes context menu for gitlens.diffLineWithPrevious -- since it is now the alt of gitlens.diffWithPrevious
Removes context menu for gitlens.diffLineWithWorking -- since it is now the alt of gitlens.diffWithWorking
Replaces gitlens.menus.fileDiff.enabled and gitlens.menus.lineDiff.enabled with gitlens.menus.diff.enabled -- since the switch between file and line diff is now controlled by the alt key

[1.3.1]

Added

Adds Diff Commit with Working Tree to the explorer context menu (assuming gitlens.menus.fileDiff.enabled is true)
Adds Diff Commit with Working Tree & Diff Commit with Previous to the editor title context menu (assuming gitlens.menus.fileDiff.enabled is true)

Changed

Renames Diff commands for better clarity
Removes Git from the commands as it feels unnecessary
Reorders the context menu commands

[1.3.0]

Added

Adds support for blame and history (log) on files opened via compare commands -- allows for deep navigation through git history

[1.2.0]

Added

Adds compare (working vs previous) options to repository history
Adds compare (working vs previous) options to file history

Fixed

Fixes issue with repository history compare with commits with multiple files

[1.1.1]

Added

Adds logging for tracking #18 - GitLens only displayed for some files

Changed

Changes gitlens.showQuickRepoHistory command to run without an open editor (falls back to the folder repository)

[1.1.0]

Added

Adds new gitlens.showQuickFileHistory command to show the file history in a quick-pick list (palette)
Adds new gitlens.showQuickRepoHistory command to show the repository history in a quick-pick list (palette)
Adds gitlens.showQuickFileHistory option to the gitlens.codeLens.recentChange.command, gitlens.codeLens.authors.command, and gitlens.statusBar.command settings

Changed

Changes the gitlens.statusBar.command settings default to gitlens.showQuickFileHistory instead of gitlens.toggleBlame

Removed

Removes git.viewFileHistory option from the gitlens.codeLens.recentChange.command, gitlens.codeLens.authors.command, and gitlens.statusBar.command settings

[1.0.2]

Fixed

Fixes #16 - incorrect 'Unable to find Git' message

[1.0.0]

Added

Adds support for git history (log)!
Adds support for blame annotations and git commands on file revisions
Adds ability to show multiple blame annotation at the same time (one per vscode editor)
Adds new gitlens.showFileHistory command to open the history explorer
Adds new gitlens.showFileHistory option to the gitlens.codeLens.recentChange.command, gitlens.codeLens.authors.command, and gitlens.statusBar.command settings
Adds per-language code lens location customization using the gitlens.codeLens.languageLocations setting
Adds new gitlens.diffLineWithPrevious command for line sensitive diffs
Adds new gitlens.diffLineWithWorking command for line sensitive diffs
Adds gitlens.diffWithPrevious command to the explorer context menu
Adds output channel logging, controlled by the gitlens.advanced.output.level setting
Improves performance of the code lens support
Improves performance (significantly) when only showing code lens at the document level
Improves performance of status bar blame support

Changed

Switches on-demand code lens to be a global toggle (rather than per file)
Complete rewrite of the blame annotation provider to reduce overhead and provide better performance
Changes gitlens.diffWithPrevious command to always be file sensitive diffs
Changes gitlens.diffWithWorking command to always be file sensitive diffs
Removes all debug logging, unless the gitlens.advanced.debug settings it on

Fixed

Fixes many (most?) issues with whitespace toggling (required because of https://github.com/Microsoft/vscode/issues/11485)
Fixes issue where blame annotations would not be cleared properly when switching between open files

[0.5.5]

Fixed

Fixes another off-by-one issue when diffing with caching

[0.5.4]

Fixed

Fixes off-by-one issues with blame annotations without caching and when diffing with a previous version

[0.5.3]

Added

Adds better uncommitted hover message in blame annotations
Adds more protection for dealing with uncommitted lines

[0.5.2]

Fixed

Fixes loading issue on Linux

[0.5.1]

Added

Adds blame information in the status bar
Add new status bar settings -- see Extension Settings for details
Adds new gitlens.diffWithPrevious option to the gitlens.codeLens.recentChange.command & gitlens.codeLens.authors.command settings

Changed

Renames the gitlens.codeLens.recentChange.command & gitlens.codeLens.authors.command settings options (to align with command names)

Removed

Removes gitlens.blame.annotation.useCodeActions setting and behavior

Fixed

Fixes Diff with Previous when the selection is uncommitted

[0.3.3]

Fixed

Fixes #7 - missing spawn-rx dependency (argh!)

[0.3.2]

Fixed

Fixes #7 - missing lodash dependency

[0.3.1]

Added

Adds new code lens visibility & location settings -- see Extension Settings for details
Adds new command to toggle code lens on and off when gitlens.codeLens.visibility is set to ondemand

[0.2.0]

Changed

Replaces blame regex parsing with a more robust parser

Fixed

Fixes #1 - Support blame on files outside the workspace repository
Fixes failures with Diff with Previous command
Fixes issues with blame explorer code lens when dealing with previous commits
Fixes display issues with compact blame annotations (now skips blank lines)

[0.1.3]

Added

Improved blame annotations, now with sha and author by default
Add new blame annotation styles -- compact and expanded (default)
Adds many new configuration settings; see Extension Settings for details

[0.0.7]

Added

Adds .gitignore checks to reduce the number of blame calls

Fixed

Fixes #4 - Absolute paths fail on Windows due to backslash (Really!)
Fixes #5 - Finding first non-white-space fails sometimes

[0.0.6]

Added

Adds attempt to scroll to the correct position when opening a diff

Fixed

Fixes #2 - [request] Provide some debug info when things fail
Fixes #4 - Absolute paths fail on Windows due to backslash

[0.0.5]

Changed

Removes code lens from fields and single-line properties to reduce visual noise
Automatically turns off blame only when required now

Fixed

Fixes issues where filename changes in history would cause diffs to fails
Fixes some issues with uncommitted blames

[0.0.4]

Added

Candidate for preview release on the vscode marketplace.

[0.0.1]

Added

Initial release but still heavily a work in progress.

44 KiB Raaka Blame Historia

Change Log

[4.0.1] - 2017-06-09

Fixed

[4.0.0] - 2017-06-09

Added

Changed

Removed

Fixed

[3.6.1] - 2017-06-07

Fixed

[3.6.0] - 2017-06-02

Added

Changed

Fixed

[3.5.1] - 2017-05-25

Changed

Fixed

[3.5.0] - 2017-05-24

Added

Changed

Fixed

[3.4.9] - 2017-05-03

Added

Changed

[3.4.8] - 2017-05-02

Changed

[3.4.6] - 2017-05-01

Added

Changed

Fixed

[3.4.5] - 2017-04-13

Added

Changed

Fixed

[3.3.3] - 2017-04-10

Fixed

[3.3.2] - 2017-04-10

Removed

Fixed

[3.3.1] - 2017-04-09

Changed

Fixed

[3.3.0] - 2017-04-09

Added

Changed

Fixed

[3.2.1]

Fixed

[3.2.0]

Added

Fixed

[3.1.0]

Added

Fixed

[3.0.5]

Added

Fixed

[3.0.4]

Changed

Fixed

[3.0.3]

Added

Fixed

[3.0.2]

Changed

[3.0.1]

Added

[3.0.0]

Added

Changed

Fixed

[2.12.2]

Fixed

[2.12.1]

Added

Fixed

[2.12.0]

Added

Changed

44 KiB

Raaka Blame Historia