fix problems in LevelDB's caching code
Background:
LevelDB uses a cache (util/cache.h, util/cache.cc) of (key,value)
pairs for two purposes:
- a cache of (table, file handle) pairs
- a cache of blocks
The cache places the (key,value) pairs in a reference-counted
wrapper. When it returns a value, it returns a reference to this
wrapper. When the client has finished using the reference and
its enclosed (key,value), it calls Release() to decrement the
reference count.
Each (key,value) pair has an associated resource usage. The
cache maintains the sum of the usages of the elements it holds,
and removes values as needed to keep the sum below a capacity
threshold. It maintains an LRU list so that it will remove the
least-recently used elements first.
The max_open_files option to LevelDB sets the size of the cache
of (table, file handle) pairs. The option is not used in any
other way.
The observed behaviour:
If LevelDB at any time used more file handles concurrently than
the cache size set via max_open_files, it attempted to reduce the
number by evicting entries from the table cache. This could
happen most easily during compaction, and if max_open_files was
low. Because the handles were in use, their reference count did
not drop to zero, and so the usage sum in the cache was not
modified by the evictions. Subsequent Insert() calls returned
valid handles, but their entries were immediately evicted from
the cache, which though empty still acted as though full. As a
result, there was effectively no caching, and the number of open
file handles rose []ly until it hit system-imposed limits and
the process died.
If one set max_open_files lower, the cache was more likely to
exhibit this beahviour, and cause the process to run out of file
descriptors. That is, max_open_files acted in almost exactly the
opposite manner from what was intended.
The problems:
1. The cache kept all elements on its LRU list eligible for capacity
eviction---even those with outstanding references from clients. This was
ineffective in reducing resource consumption because there was an
outstanding reference, guaranteeing that the items remained. A secondary
issue was that there is no guarantee that these in-use items will be the
last things reached in the LRU chain, which actually recorded
"least-recently requested" rather than "least-recently used".
2. The sum of usages was decremented not when a (key,value) was evicted from
the cache, but when its reference count went to zero. Thus, when things
were removed from the cache, either by garbage collection or via Erase(),
the usage sum was not necessarily decreased. This allowed the cache to act
as though full when it was in fact not, reducing caching effectiveness, and
leading to more resources being consumed---the opposite of what the
evictions were intended to achieve.
3. (minor) The cache's clients insert items into it by first looking up the
key, and inserting only if no value is found. Although the cache has an
internal lock, the clients use no locking to ensure atomicity of the
Lookup/Insert pair. (see table/table.cc: block_cache->Insert() and
db/table_cache.cc: cache_->Insert()). Thus, if two threads Insert() at
about the same time, they can both Lookup(), find nothing, and both
Insert(). The second Insert() would evict the first value, leaving each
thread with a handle on its own version of the data, and with the second
version in the cache. It would be better if both threads ended up with a
handle on the same (key,value) pair, which implies it must be the first item
inserted. This suggests that Insert() should not replace an existing value.
This can be made safe with current usage inside LeveDB itself, but this is
not easy to change first because Cache is a public interface, so to change
the semantics of an existing call might break things, second because Cache
is an abstract virtual class, so adding a new abstract virtual method may
break other implementations, and third, the new method "insert without
replacing" cannot be implemented in terms of the existing methods, so cannot
be implemented with a non-abstract default. But fortunately, the effects
of this issue are minor, so this issue is not fixed by this change.
The changes:
The assumption in the fixes is that it is always better to cache
entries unless removal from the cache would lead to deallocation.
Cache entries now have an "in_cache" boolean indicating whether
the cache has a reference on the entry. The only ways that this can
become false without the entry being passed to its "deleter" are via
Erase(), via Insert() when an element with a duplicate key is inserted,
or on destruction of the cache.
The cache now keeps two linked lists instead of one. All items
in the cache are in one list or the other, and never both. Items
still referenced by clients but erased from the cache are in
neither list. The lists are:
- in-use: contains the items currently referenced by clients, in no particular
order. (This list is used for invariant checking. If we removed the check,
elements that would otherwise be on this list could be left as disconnected
singleton lists.)
- LRU: contains the items not currently referenced by clients, in LRU order
A new internal Ref() method increments the reference count. If
incrementing from 1 to 2 for an item in the cache, it is moved
from the LRU list to the in-use list.
The Unref() call now moves things from the in-use list to the LRU
list if the reference count falls to 1, and the item is in the
cache. It no longer adjusts the usage sum. The usage sum now
reflects only what is in the cache, rather than including
still-referenced items that have been evicted.
The LRU_Append() now takes a "list" parameter so that it can be
used to append either to the LRU list or the in-use list.
Lookup() is modified to use the new Ref() call, rather than
adjusting the reference count and LRU chain directly.
Insert() eviction code is also modified to adjust the usage sum and the
in_cache boolean of the evicted elements. Some LevelDB tests assume that there
will be no caching whatsoever if the cache size is set to zero, so this is
handled as a special case.
A new private method FinishErase() is factored out
with the common code from where items are removed from the cache.
Erase() is modified to adjust the usage sum and the in_cache
boolean of the erased elements, and to use FinishErase().
Prune() is modified to use FinishErase() also, and to make use of the fact that
the lru_ list now contains only items with reference count 1.
- EvictionPolicy is modified to test that an entry with an
outstanding handle is not evicted. This test fails with the old cache.cc.
- A new test case UseExceedsCacheSize verifies that even when the
cache is overfull of entries with outstanding handles, none are
evicted. This test fails with the old cache.cc, and is the key
issue that causes file descriptors to run out when the cache
size is set too small.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=123247237
8年前 fix problems in LevelDB's caching code
Background:
LevelDB uses a cache (util/cache.h, util/cache.cc) of (key,value)
pairs for two purposes:
- a cache of (table, file handle) pairs
- a cache of blocks
The cache places the (key,value) pairs in a reference-counted
wrapper. When it returns a value, it returns a reference to this
wrapper. When the client has finished using the reference and
its enclosed (key,value), it calls Release() to decrement the
reference count.
Each (key,value) pair has an associated resource usage. The
cache maintains the sum of the usages of the elements it holds,
and removes values as needed to keep the sum below a capacity
threshold. It maintains an LRU list so that it will remove the
least-recently used elements first.
The max_open_files option to LevelDB sets the size of the cache
of (table, file handle) pairs. The option is not used in any
other way.
The observed behaviour:
If LevelDB at any time used more file handles concurrently than
the cache size set via max_open_files, it attempted to reduce the
number by evicting entries from the table cache. This could
happen most easily during compaction, and if max_open_files was
low. Because the handles were in use, their reference count did
not drop to zero, and so the usage sum in the cache was not
modified by the evictions. Subsequent Insert() calls returned
valid handles, but their entries were immediately evicted from
the cache, which though empty still acted as though full. As a
result, there was effectively no caching, and the number of open
file handles rose []ly until it hit system-imposed limits and
the process died.
If one set max_open_files lower, the cache was more likely to
exhibit this beahviour, and cause the process to run out of file
descriptors. That is, max_open_files acted in almost exactly the
opposite manner from what was intended.
The problems:
1. The cache kept all elements on its LRU list eligible for capacity
eviction---even those with outstanding references from clients. This was
ineffective in reducing resource consumption because there was an
outstanding reference, guaranteeing that the items remained. A secondary
issue was that there is no guarantee that these in-use items will be the
last things reached in the LRU chain, which actually recorded
"least-recently requested" rather than "least-recently used".
2. The sum of usages was decremented not when a (key,value) was evicted from
the cache, but when its reference count went to zero. Thus, when things
were removed from the cache, either by garbage collection or via Erase(),
the usage sum was not necessarily decreased. This allowed the cache to act
as though full when it was in fact not, reducing caching effectiveness, and
leading to more resources being consumed---the opposite of what the
evictions were intended to achieve.
3. (minor) The cache's clients insert items into it by first looking up the
key, and inserting only if no value is found. Although the cache has an
internal lock, the clients use no locking to ensure atomicity of the
Lookup/Insert pair. (see table/table.cc: block_cache->Insert() and
db/table_cache.cc: cache_->Insert()). Thus, if two threads Insert() at
about the same time, they can both Lookup(), find nothing, and both
Insert(). The second Insert() would evict the first value, leaving each
thread with a handle on its own version of the data, and with the second
version in the cache. It would be better if both threads ended up with a
handle on the same (key,value) pair, which implies it must be the first item
inserted. This suggests that Insert() should not replace an existing value.
This can be made safe with current usage inside LeveDB itself, but this is
not easy to change first because Cache is a public interface, so to change
the semantics of an existing call might break things, second because Cache
is an abstract virtual class, so adding a new abstract virtual method may
break other implementations, and third, the new method "insert without
replacing" cannot be implemented in terms of the existing methods, so cannot
be implemented with a non-abstract default. But fortunately, the effects
of this issue are minor, so this issue is not fixed by this change.
The changes:
The assumption in the fixes is that it is always better to cache
entries unless removal from the cache would lead to deallocation.
Cache entries now have an "in_cache" boolean indicating whether
the cache has a reference on the entry. The only ways that this can
become false without the entry being passed to its "deleter" are via
Erase(), via Insert() when an element with a duplicate key is inserted,
or on destruction of the cache.
The cache now keeps two linked lists instead of one. All items
in the cache are in one list or the other, and never both. Items
still referenced by clients but erased from the cache are in
neither list. The lists are:
- in-use: contains the items currently referenced by clients, in no particular
order. (This list is used for invariant checking. If we removed the check,
elements that would otherwise be on this list could be left as disconnected
singleton lists.)
- LRU: contains the items not currently referenced by clients, in LRU order
A new internal Ref() method increments the reference count. If
incrementing from 1 to 2 for an item in the cache, it is moved
from the LRU list to the in-use list.
The Unref() call now moves things from the in-use list to the LRU
list if the reference count falls to 1, and the item is in the
cache. It no longer adjusts the usage sum. The usage sum now
reflects only what is in the cache, rather than including
still-referenced items that have been evicted.
The LRU_Append() now takes a "list" parameter so that it can be
used to append either to the LRU list or the in-use list.
Lookup() is modified to use the new Ref() call, rather than
adjusting the reference count and LRU chain directly.
Insert() eviction code is also modified to adjust the usage sum and the
in_cache boolean of the evicted elements. Some LevelDB tests assume that there
will be no caching whatsoever if the cache size is set to zero, so this is
handled as a special case.
A new private method FinishErase() is factored out
with the common code from where items are removed from the cache.
Erase() is modified to adjust the usage sum and the in_cache
boolean of the erased elements, and to use FinishErase().
Prune() is modified to use FinishErase() also, and to make use of the fact that
the lru_ list now contains only items with reference count 1.
- EvictionPolicy is modified to test that an entry with an
outstanding handle is not evicted. This test fails with the old cache.cc.
- A new test case UseExceedsCacheSize verifies that even when the
cache is overfull of entries with outstanding handles, none are
evicted. This test fails with the old cache.cc, and is the key
issue that causes file descriptors to run out when the cache
size is set too small.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=123247237
8年前 fix problems in LevelDB's caching code
Background:
LevelDB uses a cache (util/cache.h, util/cache.cc) of (key,value)
pairs for two purposes:
- a cache of (table, file handle) pairs
- a cache of blocks
The cache places the (key,value) pairs in a reference-counted
wrapper. When it returns a value, it returns a reference to this
wrapper. When the client has finished using the reference and
its enclosed (key,value), it calls Release() to decrement the
reference count.
Each (key,value) pair has an associated resource usage. The
cache maintains the sum of the usages of the elements it holds,
and removes values as needed to keep the sum below a capacity
threshold. It maintains an LRU list so that it will remove the
least-recently used elements first.
The max_open_files option to LevelDB sets the size of the cache
of (table, file handle) pairs. The option is not used in any
other way.
The observed behaviour:
If LevelDB at any time used more file handles concurrently than
the cache size set via max_open_files, it attempted to reduce the
number by evicting entries from the table cache. This could
happen most easily during compaction, and if max_open_files was
low. Because the handles were in use, their reference count did
not drop to zero, and so the usage sum in the cache was not
modified by the evictions. Subsequent Insert() calls returned
valid handles, but their entries were immediately evicted from
the cache, which though empty still acted as though full. As a
result, there was effectively no caching, and the number of open
file handles rose []ly until it hit system-imposed limits and
the process died.
If one set max_open_files lower, the cache was more likely to
exhibit this beahviour, and cause the process to run out of file
descriptors. That is, max_open_files acted in almost exactly the
opposite manner from what was intended.
The problems:
1. The cache kept all elements on its LRU list eligible for capacity
eviction---even those with outstanding references from clients. This was
ineffective in reducing resource consumption because there was an
outstanding reference, guaranteeing that the items remained. A secondary
issue was that there is no guarantee that these in-use items will be the
last things reached in the LRU chain, which actually recorded
"least-recently requested" rather than "least-recently used".
2. The sum of usages was decremented not when a (key,value) was evicted from
the cache, but when its reference count went to zero. Thus, when things
were removed from the cache, either by garbage collection or via Erase(),
the usage sum was not necessarily decreased. This allowed the cache to act
as though full when it was in fact not, reducing caching effectiveness, and
leading to more resources being consumed---the opposite of what the
evictions were intended to achieve.
3. (minor) The cache's clients insert items into it by first looking up the
key, and inserting only if no value is found. Although the cache has an
internal lock, the clients use no locking to ensure atomicity of the
Lookup/Insert pair. (see table/table.cc: block_cache->Insert() and
db/table_cache.cc: cache_->Insert()). Thus, if two threads Insert() at
about the same time, they can both Lookup(), find nothing, and both
Insert(). The second Insert() would evict the first value, leaving each
thread with a handle on its own version of the data, and with the second
version in the cache. It would be better if both threads ended up with a
handle on the same (key,value) pair, which implies it must be the first item
inserted. This suggests that Insert() should not replace an existing value.
This can be made safe with current usage inside LeveDB itself, but this is
not easy to change first because Cache is a public interface, so to change
the semantics of an existing call might break things, second because Cache
is an abstract virtual class, so adding a new abstract virtual method may
break other implementations, and third, the new method "insert without
replacing" cannot be implemented in terms of the existing methods, so cannot
be implemented with a non-abstract default. But fortunately, the effects
of this issue are minor, so this issue is not fixed by this change.
The changes:
The assumption in the fixes is that it is always better to cache
entries unless removal from the cache would lead to deallocation.
Cache entries now have an "in_cache" boolean indicating whether
the cache has a reference on the entry. The only ways that this can
become false without the entry being passed to its "deleter" are via
Erase(), via Insert() when an element with a duplicate key is inserted,
or on destruction of the cache.
The cache now keeps two linked lists instead of one. All items
in the cache are in one list or the other, and never both. Items
still referenced by clients but erased from the cache are in
neither list. The lists are:
- in-use: contains the items currently referenced by clients, in no particular
order. (This list is used for invariant checking. If we removed the check,
elements that would otherwise be on this list could be left as disconnected
singleton lists.)
- LRU: contains the items not currently referenced by clients, in LRU order
A new internal Ref() method increments the reference count. If
incrementing from 1 to 2 for an item in the cache, it is moved
from the LRU list to the in-use list.
The Unref() call now moves things from the in-use list to the LRU
list if the reference count falls to 1, and the item is in the
cache. It no longer adjusts the usage sum. The usage sum now
reflects only what is in the cache, rather than including
still-referenced items that have been evicted.
The LRU_Append() now takes a "list" parameter so that it can be
used to append either to the LRU list or the in-use list.
Lookup() is modified to use the new Ref() call, rather than
adjusting the reference count and LRU chain directly.
Insert() eviction code is also modified to adjust the usage sum and the
in_cache boolean of the evicted elements. Some LevelDB tests assume that there
will be no caching whatsoever if the cache size is set to zero, so this is
handled as a special case.
A new private method FinishErase() is factored out
with the common code from where items are removed from the cache.
Erase() is modified to adjust the usage sum and the in_cache
boolean of the erased elements, and to use FinishErase().
Prune() is modified to use FinishErase() also, and to make use of the fact that
the lru_ list now contains only items with reference count 1.
- EvictionPolicy is modified to test that an entry with an
outstanding handle is not evicted. This test fails with the old cache.cc.
- A new test case UseExceedsCacheSize verifies that even when the
cache is overfull of entries with outstanding handles, none are
evicted. This test fails with the old cache.cc, and is the key
issue that causes file descriptors to run out when the cache
size is set too small.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=123247237
8年前 fix problems in LevelDB's caching code
Background:
LevelDB uses a cache (util/cache.h, util/cache.cc) of (key,value)
pairs for two purposes:
- a cache of (table, file handle) pairs
- a cache of blocks
The cache places the (key,value) pairs in a reference-counted
wrapper. When it returns a value, it returns a reference to this
wrapper. When the client has finished using the reference and
its enclosed (key,value), it calls Release() to decrement the
reference count.
Each (key,value) pair has an associated resource usage. The
cache maintains the sum of the usages of the elements it holds,
and removes values as needed to keep the sum below a capacity
threshold. It maintains an LRU list so that it will remove the
least-recently used elements first.
The max_open_files option to LevelDB sets the size of the cache
of (table, file handle) pairs. The option is not used in any
other way.
The observed behaviour:
If LevelDB at any time used more file handles concurrently than
the cache size set via max_open_files, it attempted to reduce the
number by evicting entries from the table cache. This could
happen most easily during compaction, and if max_open_files was
low. Because the handles were in use, their reference count did
not drop to zero, and so the usage sum in the cache was not
modified by the evictions. Subsequent Insert() calls returned
valid handles, but their entries were immediately evicted from
the cache, which though empty still acted as though full. As a
result, there was effectively no caching, and the number of open
file handles rose []ly until it hit system-imposed limits and
the process died.
If one set max_open_files lower, the cache was more likely to
exhibit this beahviour, and cause the process to run out of file
descriptors. That is, max_open_files acted in almost exactly the
opposite manner from what was intended.
The problems:
1. The cache kept all elements on its LRU list eligible for capacity
eviction---even those with outstanding references from clients. This was
ineffective in reducing resource consumption because there was an
outstanding reference, guaranteeing that the items remained. A secondary
issue was that there is no guarantee that these in-use items will be the
last things reached in the LRU chain, which actually recorded
"least-recently requested" rather than "least-recently used".
2. The sum of usages was decremented not when a (key,value) was evicted from
the cache, but when its reference count went to zero. Thus, when things
were removed from the cache, either by garbage collection or via Erase(),
the usage sum was not necessarily decreased. This allowed the cache to act
as though full when it was in fact not, reducing caching effectiveness, and
leading to more resources being consumed---the opposite of what the
evictions were intended to achieve.
3. (minor) The cache's clients insert items into it by first looking up the
key, and inserting only if no value is found. Although the cache has an
internal lock, the clients use no locking to ensure atomicity of the
Lookup/Insert pair. (see table/table.cc: block_cache->Insert() and
db/table_cache.cc: cache_->Insert()). Thus, if two threads Insert() at
about the same time, they can both Lookup(), find nothing, and both
Insert(). The second Insert() would evict the first value, leaving each
thread with a handle on its own version of the data, and with the second
version in the cache. It would be better if both threads ended up with a
handle on the same (key,value) pair, which implies it must be the first item
inserted. This suggests that Insert() should not replace an existing value.
This can be made safe with current usage inside LeveDB itself, but this is
not easy to change first because Cache is a public interface, so to change
the semantics of an existing call might break things, second because Cache
is an abstract virtual class, so adding a new abstract virtual method may
break other implementations, and third, the new method "insert without
replacing" cannot be implemented in terms of the existing methods, so cannot
be implemented with a non-abstract default. But fortunately, the effects
of this issue are minor, so this issue is not fixed by this change.
The changes:
The assumption in the fixes is that it is always better to cache
entries unless removal from the cache would lead to deallocation.
Cache entries now have an "in_cache" boolean indicating whether
the cache has a reference on the entry. The only ways that this can
become false without the entry being passed to its "deleter" are via
Erase(), via Insert() when an element with a duplicate key is inserted,
or on destruction of the cache.
The cache now keeps two linked lists instead of one. All items
in the cache are in one list or the other, and never both. Items
still referenced by clients but erased from the cache are in
neither list. The lists are:
- in-use: contains the items currently referenced by clients, in no particular
order. (This list is used for invariant checking. If we removed the check,
elements that would otherwise be on this list could be left as disconnected
singleton lists.)
- LRU: contains the items not currently referenced by clients, in LRU order
A new internal Ref() method increments the reference count. If
incrementing from 1 to 2 for an item in the cache, it is moved
from the LRU list to the in-use list.
The Unref() call now moves things from the in-use list to the LRU
list if the reference count falls to 1, and the item is in the
cache. It no longer adjusts the usage sum. The usage sum now
reflects only what is in the cache, rather than including
still-referenced items that have been evicted.
The LRU_Append() now takes a "list" parameter so that it can be
used to append either to the LRU list or the in-use list.
Lookup() is modified to use the new Ref() call, rather than
adjusting the reference count and LRU chain directly.
Insert() eviction code is also modified to adjust the usage sum and the
in_cache boolean of the evicted elements. Some LevelDB tests assume that there
will be no caching whatsoever if the cache size is set to zero, so this is
handled as a special case.
A new private method FinishErase() is factored out
with the common code from where items are removed from the cache.
Erase() is modified to adjust the usage sum and the in_cache
boolean of the erased elements, and to use FinishErase().
Prune() is modified to use FinishErase() also, and to make use of the fact that
the lru_ list now contains only items with reference count 1.
- EvictionPolicy is modified to test that an entry with an
outstanding handle is not evicted. This test fails with the old cache.cc.
- A new test case UseExceedsCacheSize verifies that even when the
cache is overfull of entries with outstanding handles, none are
evicted. This test fails with the old cache.cc, and is the key
issue that causes file descriptors to run out when the cache
size is set too small.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=123247237
8年前 fix problems in LevelDB's caching code
Background:
LevelDB uses a cache (util/cache.h, util/cache.cc) of (key,value)
pairs for two purposes:
- a cache of (table, file handle) pairs
- a cache of blocks
The cache places the (key,value) pairs in a reference-counted
wrapper. When it returns a value, it returns a reference to this
wrapper. When the client has finished using the reference and
its enclosed (key,value), it calls Release() to decrement the
reference count.
Each (key,value) pair has an associated resource usage. The
cache maintains the sum of the usages of the elements it holds,
and removes values as needed to keep the sum below a capacity
threshold. It maintains an LRU list so that it will remove the
least-recently used elements first.
The max_open_files option to LevelDB sets the size of the cache
of (table, file handle) pairs. The option is not used in any
other way.
The observed behaviour:
If LevelDB at any time used more file handles concurrently than
the cache size set via max_open_files, it attempted to reduce the
number by evicting entries from the table cache. This could
happen most easily during compaction, and if max_open_files was
low. Because the handles were in use, their reference count did
not drop to zero, and so the usage sum in the cache was not
modified by the evictions. Subsequent Insert() calls returned
valid handles, but their entries were immediately evicted from
the cache, which though empty still acted as though full. As a
result, there was effectively no caching, and the number of open
file handles rose []ly until it hit system-imposed limits and
the process died.
If one set max_open_files lower, the cache was more likely to
exhibit this beahviour, and cause the process to run out of file
descriptors. That is, max_open_files acted in almost exactly the
opposite manner from what was intended.
The problems:
1. The cache kept all elements on its LRU list eligible for capacity
eviction---even those with outstanding references from clients. This was
ineffective in reducing resource consumption because there was an
outstanding reference, guaranteeing that the items remained. A secondary
issue was that there is no guarantee that these in-use items will be the
last things reached in the LRU chain, which actually recorded
"least-recently requested" rather than "least-recently used".
2. The sum of usages was decremented not when a (key,value) was evicted from
the cache, but when its reference count went to zero. Thus, when things
were removed from the cache, either by garbage collection or via Erase(),
the usage sum was not necessarily decreased. This allowed the cache to act
as though full when it was in fact not, reducing caching effectiveness, and
leading to more resources being consumed---the opposite of what the
evictions were intended to achieve.
3. (minor) The cache's clients insert items into it by first looking up the
key, and inserting only if no value is found. Although the cache has an
internal lock, the clients use no locking to ensure atomicity of the
Lookup/Insert pair. (see table/table.cc: block_cache->Insert() and
db/table_cache.cc: cache_->Insert()). Thus, if two threads Insert() at
about the same time, they can both Lookup(), find nothing, and both
Insert(). The second Insert() would evict the first value, leaving each
thread with a handle on its own version of the data, and with the second
version in the cache. It would be better if both threads ended up with a
handle on the same (key,value) pair, which implies it must be the first item
inserted. This suggests that Insert() should not replace an existing value.
This can be made safe with current usage inside LeveDB itself, but this is
not easy to change first because Cache is a public interface, so to change
the semantics of an existing call might break things, second because Cache
is an abstract virtual class, so adding a new abstract virtual method may
break other implementations, and third, the new method "insert without
replacing" cannot be implemented in terms of the existing methods, so cannot
be implemented with a non-abstract default. But fortunately, the effects
of this issue are minor, so this issue is not fixed by this change.
The changes:
The assumption in the fixes is that it is always better to cache
entries unless removal from the cache would lead to deallocation.
Cache entries now have an "in_cache" boolean indicating whether
the cache has a reference on the entry. The only ways that this can
become false without the entry being passed to its "deleter" are via
Erase(), via Insert() when an element with a duplicate key is inserted,
or on destruction of the cache.
The cache now keeps two linked lists instead of one. All items
in the cache are in one list or the other, and never both. Items
still referenced by clients but erased from the cache are in
neither list. The lists are:
- in-use: contains the items currently referenced by clients, in no particular
order. (This list is used for invariant checking. If we removed the check,
elements that would otherwise be on this list could be left as disconnected
singleton lists.)
- LRU: contains the items not currently referenced by clients, in LRU order
A new internal Ref() method increments the reference count. If
incrementing from 1 to 2 for an item in the cache, it is moved
from the LRU list to the in-use list.
The Unref() call now moves things from the in-use list to the LRU
list if the reference count falls to 1, and the item is in the
cache. It no longer adjusts the usage sum. The usage sum now
reflects only what is in the cache, rather than including
still-referenced items that have been evicted.
The LRU_Append() now takes a "list" parameter so that it can be
used to append either to the LRU list or the in-use list.
Lookup() is modified to use the new Ref() call, rather than
adjusting the reference count and LRU chain directly.
Insert() eviction code is also modified to adjust the usage sum and the
in_cache boolean of the evicted elements. Some LevelDB tests assume that there
will be no caching whatsoever if the cache size is set to zero, so this is
handled as a special case.
A new private method FinishErase() is factored out
with the common code from where items are removed from the cache.
Erase() is modified to adjust the usage sum and the in_cache
boolean of the erased elements, and to use FinishErase().
Prune() is modified to use FinishErase() also, and to make use of the fact that
the lru_ list now contains only items with reference count 1.
- EvictionPolicy is modified to test that an entry with an
outstanding handle is not evicted. This test fails with the old cache.cc.
- A new test case UseExceedsCacheSize verifies that even when the
cache is overfull of entries with outstanding handles, none are
evicted. This test fails with the old cache.cc, and is the key
issue that causes file descriptors to run out when the cache
size is set too small.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=123247237
8年前 fix problems in LevelDB's caching code
Background:
LevelDB uses a cache (util/cache.h, util/cache.cc) of (key,value)
pairs for two purposes:
- a cache of (table, file handle) pairs
- a cache of blocks
The cache places the (key,value) pairs in a reference-counted
wrapper. When it returns a value, it returns a reference to this
wrapper. When the client has finished using the reference and
its enclosed (key,value), it calls Release() to decrement the
reference count.
Each (key,value) pair has an associated resource usage. The
cache maintains the sum of the usages of the elements it holds,
and removes values as needed to keep the sum below a capacity
threshold. It maintains an LRU list so that it will remove the
least-recently used elements first.
The max_open_files option to LevelDB sets the size of the cache
of (table, file handle) pairs. The option is not used in any
other way.
The observed behaviour:
If LevelDB at any time used more file handles concurrently than
the cache size set via max_open_files, it attempted to reduce the
number by evicting entries from the table cache. This could
happen most easily during compaction, and if max_open_files was
low. Because the handles were in use, their reference count did
not drop to zero, and so the usage sum in the cache was not
modified by the evictions. Subsequent Insert() calls returned
valid handles, but their entries were immediately evicted from
the cache, which though empty still acted as though full. As a
result, there was effectively no caching, and the number of open
file handles rose []ly until it hit system-imposed limits and
the process died.
If one set max_open_files lower, the cache was more likely to
exhibit this beahviour, and cause the process to run out of file
descriptors. That is, max_open_files acted in almost exactly the
opposite manner from what was intended.
The problems:
1. The cache kept all elements on its LRU list eligible for capacity
eviction---even those with outstanding references from clients. This was
ineffective in reducing resource consumption because there was an
outstanding reference, guaranteeing that the items remained. A secondary
issue was that there is no guarantee that these in-use items will be the
last things reached in the LRU chain, which actually recorded
"least-recently requested" rather than "least-recently used".
2. The sum of usages was decremented not when a (key,value) was evicted from
the cache, but when its reference count went to zero. Thus, when things
were removed from the cache, either by garbage collection or via Erase(),
the usage sum was not necessarily decreased. This allowed the cache to act
as though full when it was in fact not, reducing caching effectiveness, and
leading to more resources being consumed---the opposite of what the
evictions were intended to achieve.
3. (minor) The cache's clients insert items into it by first looking up the
key, and inserting only if no value is found. Although the cache has an
internal lock, the clients use no locking to ensure atomicity of the
Lookup/Insert pair. (see table/table.cc: block_cache->Insert() and
db/table_cache.cc: cache_->Insert()). Thus, if two threads Insert() at
about the same time, they can both Lookup(), find nothing, and both
Insert(). The second Insert() would evict the first value, leaving each
thread with a handle on its own version of the data, and with the second
version in the cache. It would be better if both threads ended up with a
handle on the same (key,value) pair, which implies it must be the first item
inserted. This suggests that Insert() should not replace an existing value.
This can be made safe with current usage inside LeveDB itself, but this is
not easy to change first because Cache is a public interface, so to change
the semantics of an existing call might break things, second because Cache
is an abstract virtual class, so adding a new abstract virtual method may
break other implementations, and third, the new method "insert without
replacing" cannot be implemented in terms of the existing methods, so cannot
be implemented with a non-abstract default. But fortunately, the effects
of this issue are minor, so this issue is not fixed by this change.
The changes:
The assumption in the fixes is that it is always better to cache
entries unless removal from the cache would lead to deallocation.
Cache entries now have an "in_cache" boolean indicating whether
the cache has a reference on the entry. The only ways that this can
become false without the entry being passed to its "deleter" are via
Erase(), via Insert() when an element with a duplicate key is inserted,
or on destruction of the cache.
The cache now keeps two linked lists instead of one. All items
in the cache are in one list or the other, and never both. Items
still referenced by clients but erased from the cache are in
neither list. The lists are:
- in-use: contains the items currently referenced by clients, in no particular
order. (This list is used for invariant checking. If we removed the check,
elements that would otherwise be on this list could be left as disconnected
singleton lists.)
- LRU: contains the items not currently referenced by clients, in LRU order
A new internal Ref() method increments the reference count. If
incrementing from 1 to 2 for an item in the cache, it is moved
from the LRU list to the in-use list.
The Unref() call now moves things from the in-use list to the LRU
list if the reference count falls to 1, and the item is in the
cache. It no longer adjusts the usage sum. The usage sum now
reflects only what is in the cache, rather than including
still-referenced items that have been evicted.
The LRU_Append() now takes a "list" parameter so that it can be
used to append either to the LRU list or the in-use list.
Lookup() is modified to use the new Ref() call, rather than
adjusting the reference count and LRU chain directly.
Insert() eviction code is also modified to adjust the usage sum and the
in_cache boolean of the evicted elements. Some LevelDB tests assume that there
will be no caching whatsoever if the cache size is set to zero, so this is
handled as a special case.
A new private method FinishErase() is factored out
with the common code from where items are removed from the cache.
Erase() is modified to adjust the usage sum and the in_cache
boolean of the erased elements, and to use FinishErase().
Prune() is modified to use FinishErase() also, and to make use of the fact that
the lru_ list now contains only items with reference count 1.
- EvictionPolicy is modified to test that an entry with an
outstanding handle is not evicted. This test fails with the old cache.cc.
- A new test case UseExceedsCacheSize verifies that even when the
cache is overfull of entries with outstanding handles, none are
evicted. This test fails with the old cache.cc, and is the key
issue that causes file descriptors to run out when the cache
size is set too small.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=123247237
8年前 fix problems in LevelDB's caching code
Background:
LevelDB uses a cache (util/cache.h, util/cache.cc) of (key,value)
pairs for two purposes:
- a cache of (table, file handle) pairs
- a cache of blocks
The cache places the (key,value) pairs in a reference-counted
wrapper. When it returns a value, it returns a reference to this
wrapper. When the client has finished using the reference and
its enclosed (key,value), it calls Release() to decrement the
reference count.
Each (key,value) pair has an associated resource usage. The
cache maintains the sum of the usages of the elements it holds,
and removes values as needed to keep the sum below a capacity
threshold. It maintains an LRU list so that it will remove the
least-recently used elements first.
The max_open_files option to LevelDB sets the size of the cache
of (table, file handle) pairs. The option is not used in any
other way.
The observed behaviour:
If LevelDB at any time used more file handles concurrently than
the cache size set via max_open_files, it attempted to reduce the
number by evicting entries from the table cache. This could
happen most easily during compaction, and if max_open_files was
low. Because the handles were in use, their reference count did
not drop to zero, and so the usage sum in the cache was not
modified by the evictions. Subsequent Insert() calls returned
valid handles, but their entries were immediately evicted from
the cache, which though empty still acted as though full. As a
result, there was effectively no caching, and the number of open
file handles rose []ly until it hit system-imposed limits and
the process died.
If one set max_open_files lower, the cache was more likely to
exhibit this beahviour, and cause the process to run out of file
descriptors. That is, max_open_files acted in almost exactly the
opposite manner from what was intended.
The problems:
1. The cache kept all elements on its LRU list eligible for capacity
eviction---even those with outstanding references from clients. This was
ineffective in reducing resource consumption because there was an
outstanding reference, guaranteeing that the items remained. A secondary
issue was that there is no guarantee that these in-use items will be the
last things reached in the LRU chain, which actually recorded
"least-recently requested" rather than "least-recently used".
2. The sum of usages was decremented not when a (key,value) was evicted from
the cache, but when its reference count went to zero. Thus, when things
were removed from the cache, either by garbage collection or via Erase(),
the usage sum was not necessarily decreased. This allowed the cache to act
as though full when it was in fact not, reducing caching effectiveness, and
leading to more resources being consumed---the opposite of what the
evictions were intended to achieve.
3. (minor) The cache's clients insert items into it by first looking up the
key, and inserting only if no value is found. Although the cache has an
internal lock, the clients use no locking to ensure atomicity of the
Lookup/Insert pair. (see table/table.cc: block_cache->Insert() and
db/table_cache.cc: cache_->Insert()). Thus, if two threads Insert() at
about the same time, they can both Lookup(), find nothing, and both
Insert(). The second Insert() would evict the first value, leaving each
thread with a handle on its own version of the data, and with the second
version in the cache. It would be better if both threads ended up with a
handle on the same (key,value) pair, which implies it must be the first item
inserted. This suggests that Insert() should not replace an existing value.
This can be made safe with current usage inside LeveDB itself, but this is
not easy to change first because Cache is a public interface, so to change
the semantics of an existing call might break things, second because Cache
is an abstract virtual class, so adding a new abstract virtual method may
break other implementations, and third, the new method "insert without
replacing" cannot be implemented in terms of the existing methods, so cannot
be implemented with a non-abstract default. But fortunately, the effects
of this issue are minor, so this issue is not fixed by this change.
The changes:
The assumption in the fixes is that it is always better to cache
entries unless removal from the cache would lead to deallocation.
Cache entries now have an "in_cache" boolean indicating whether
the cache has a reference on the entry. The only ways that this can
become false without the entry being passed to its "deleter" are via
Erase(), via Insert() when an element with a duplicate key is inserted,
or on destruction of the cache.
The cache now keeps two linked lists instead of one. All items
in the cache are in one list or the other, and never both. Items
still referenced by clients but erased from the cache are in
neither list. The lists are:
- in-use: contains the items currently referenced by clients, in no particular
order. (This list is used for invariant checking. If we removed the check,
elements that would otherwise be on this list could be left as disconnected
singleton lists.)
- LRU: contains the items not currently referenced by clients, in LRU order
A new internal Ref() method increments the reference count. If
incrementing from 1 to 2 for an item in the cache, it is moved
from the LRU list to the in-use list.
The Unref() call now moves things from the in-use list to the LRU
list if the reference count falls to 1, and the item is in the
cache. It no longer adjusts the usage sum. The usage sum now
reflects only what is in the cache, rather than including
still-referenced items that have been evicted.
The LRU_Append() now takes a "list" parameter so that it can be
used to append either to the LRU list or the in-use list.
Lookup() is modified to use the new Ref() call, rather than
adjusting the reference count and LRU chain directly.
Insert() eviction code is also modified to adjust the usage sum and the
in_cache boolean of the evicted elements. Some LevelDB tests assume that there
will be no caching whatsoever if the cache size is set to zero, so this is
handled as a special case.
A new private method FinishErase() is factored out
with the common code from where items are removed from the cache.
Erase() is modified to adjust the usage sum and the in_cache
boolean of the erased elements, and to use FinishErase().
Prune() is modified to use FinishErase() also, and to make use of the fact that
the lru_ list now contains only items with reference count 1.
- EvictionPolicy is modified to test that an entry with an
outstanding handle is not evicted. This test fails with the old cache.cc.
- A new test case UseExceedsCacheSize verifies that even when the
cache is overfull of entries with outstanding handles, none are
evicted. This test fails with the old cache.cc, and is the key
issue that causes file descriptors to run out when the cache
size is set too small.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=123247237
8年前 fix problems in LevelDB's caching code
Background:
LevelDB uses a cache (util/cache.h, util/cache.cc) of (key,value)
pairs for two purposes:
- a cache of (table, file handle) pairs
- a cache of blocks
The cache places the (key,value) pairs in a reference-counted
wrapper. When it returns a value, it returns a reference to this
wrapper. When the client has finished using the reference and
its enclosed (key,value), it calls Release() to decrement the
reference count.
Each (key,value) pair has an associated resource usage. The
cache maintains the sum of the usages of the elements it holds,
and removes values as needed to keep the sum below a capacity
threshold. It maintains an LRU list so that it will remove the
least-recently used elements first.
The max_open_files option to LevelDB sets the size of the cache
of (table, file handle) pairs. The option is not used in any
other way.
The observed behaviour:
If LevelDB at any time used more file handles concurrently than
the cache size set via max_open_files, it attempted to reduce the
number by evicting entries from the table cache. This could
happen most easily during compaction, and if max_open_files was
low. Because the handles were in use, their reference count did
not drop to zero, and so the usage sum in the cache was not
modified by the evictions. Subsequent Insert() calls returned
valid handles, but their entries were immediately evicted from
the cache, which though empty still acted as though full. As a
result, there was effectively no caching, and the number of open
file handles rose []ly until it hit system-imposed limits and
the process died.
If one set max_open_files lower, the cache was more likely to
exhibit this beahviour, and cause the process to run out of file
descriptors. That is, max_open_files acted in almost exactly the
opposite manner from what was intended.
The problems:
1. The cache kept all elements on its LRU list eligible for capacity
eviction---even those with outstanding references from clients. This was
ineffective in reducing resource consumption because there was an
outstanding reference, guaranteeing that the items remained. A secondary
issue was that there is no guarantee that these in-use items will be the
last things reached in the LRU chain, which actually recorded
"least-recently requested" rather than "least-recently used".
2. The sum of usages was decremented not when a (key,value) was evicted from
the cache, but when its reference count went to zero. Thus, when things
were removed from the cache, either by garbage collection or via Erase(),
the usage sum was not necessarily decreased. This allowed the cache to act
as though full when it was in fact not, reducing caching effectiveness, and
leading to more resources being consumed---the opposite of what the
evictions were intended to achieve.
3. (minor) The cache's clients insert items into it by first looking up the
key, and inserting only if no value is found. Although the cache has an
internal lock, the clients use no locking to ensure atomicity of the
Lookup/Insert pair. (see table/table.cc: block_cache->Insert() and
db/table_cache.cc: cache_->Insert()). Thus, if two threads Insert() at
about the same time, they can both Lookup(), find nothing, and both
Insert(). The second Insert() would evict the first value, leaving each
thread with a handle on its own version of the data, and with the second
version in the cache. It would be better if both threads ended up with a
handle on the same (key,value) pair, which implies it must be the first item
inserted. This suggests that Insert() should not replace an existing value.
This can be made safe with current usage inside LeveDB itself, but this is
not easy to change first because Cache is a public interface, so to change
the semantics of an existing call might break things, second because Cache
is an abstract virtual class, so adding a new abstract virtual method may
break other implementations, and third, the new method "insert without
replacing" cannot be implemented in terms of the existing methods, so cannot
be implemented with a non-abstract default. But fortunately, the effects
of this issue are minor, so this issue is not fixed by this change.
The changes:
The assumption in the fixes is that it is always better to cache
entries unless removal from the cache would lead to deallocation.
Cache entries now have an "in_cache" boolean indicating whether
the cache has a reference on the entry. The only ways that this can
become false without the entry being passed to its "deleter" are via
Erase(), via Insert() when an element with a duplicate key is inserted,
or on destruction of the cache.
The cache now keeps two linked lists instead of one. All items
in the cache are in one list or the other, and never both. Items
still referenced by clients but erased from the cache are in
neither list. The lists are:
- in-use: contains the items currently referenced by clients, in no particular
order. (This list is used for invariant checking. If we removed the check,
elements that would otherwise be on this list could be left as disconnected
singleton lists.)
- LRU: contains the items not currently referenced by clients, in LRU order
A new internal Ref() method increments the reference count. If
incrementing from 1 to 2 for an item in the cache, it is moved
from the LRU list to the in-use list.
The Unref() call now moves things from the in-use list to the LRU
list if the reference count falls to 1, and the item is in the
cache. It no longer adjusts the usage sum. The usage sum now
reflects only what is in the cache, rather than including
still-referenced items that have been evicted.
The LRU_Append() now takes a "list" parameter so that it can be
used to append either to the LRU list or the in-use list.
Lookup() is modified to use the new Ref() call, rather than
adjusting the reference count and LRU chain directly.
Insert() eviction code is also modified to adjust the usage sum and the
in_cache boolean of the evicted elements. Some LevelDB tests assume that there
will be no caching whatsoever if the cache size is set to zero, so this is
handled as a special case.
A new private method FinishErase() is factored out
with the common code from where items are removed from the cache.
Erase() is modified to adjust the usage sum and the in_cache
boolean of the erased elements, and to use FinishErase().
Prune() is modified to use FinishErase() also, and to make use of the fact that
the lru_ list now contains only items with reference count 1.
- EvictionPolicy is modified to test that an entry with an
outstanding handle is not evicted. This test fails with the old cache.cc.
- A new test case UseExceedsCacheSize verifies that even when the
cache is overfull of entries with outstanding handles, none are
evicted. This test fails with the old cache.cc, and is the key
issue that causes file descriptors to run out when the cache
size is set too small.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=123247237
8年前 fix problems in LevelDB's caching code
Background:
LevelDB uses a cache (util/cache.h, util/cache.cc) of (key,value)
pairs for two purposes:
- a cache of (table, file handle) pairs
- a cache of blocks
The cache places the (key,value) pairs in a reference-counted
wrapper. When it returns a value, it returns a reference to this
wrapper. When the client has finished using the reference and
its enclosed (key,value), it calls Release() to decrement the
reference count.
Each (key,value) pair has an associated resource usage. The
cache maintains the sum of the usages of the elements it holds,
and removes values as needed to keep the sum below a capacity
threshold. It maintains an LRU list so that it will remove the
least-recently used elements first.
The max_open_files option to LevelDB sets the size of the cache
of (table, file handle) pairs. The option is not used in any
other way.
The observed behaviour:
If LevelDB at any time used more file handles concurrently than
the cache size set via max_open_files, it attempted to reduce the
number by evicting entries from the table cache. This could
happen most easily during compaction, and if max_open_files was
low. Because the handles were in use, their reference count did
not drop to zero, and so the usage sum in the cache was not
modified by the evictions. Subsequent Insert() calls returned
valid handles, but their entries were immediately evicted from
the cache, which though empty still acted as though full. As a
result, there was effectively no caching, and the number of open
file handles rose []ly until it hit system-imposed limits and
the process died.
If one set max_open_files lower, the cache was more likely to
exhibit this beahviour, and cause the process to run out of file
descriptors. That is, max_open_files acted in almost exactly the
opposite manner from what was intended.
The problems:
1. The cache kept all elements on its LRU list eligible for capacity
eviction---even those with outstanding references from clients. This was
ineffective in reducing resource consumption because there was an
outstanding reference, guaranteeing that the items remained. A secondary
issue was that there is no guarantee that these in-use items will be the
last things reached in the LRU chain, which actually recorded
"least-recently requested" rather than "least-recently used".
2. The sum of usages was decremented not when a (key,value) was evicted from
the cache, but when its reference count went to zero. Thus, when things
were removed from the cache, either by garbage collection or via Erase(),
the usage sum was not necessarily decreased. This allowed the cache to act
as though full when it was in fact not, reducing caching effectiveness, and
leading to more resources being consumed---the opposite of what the
evictions were intended to achieve.
3. (minor) The cache's clients insert items into it by first looking up the
key, and inserting only if no value is found. Although the cache has an
internal lock, the clients use no locking to ensure atomicity of the
Lookup/Insert pair. (see table/table.cc: block_cache->Insert() and
db/table_cache.cc: cache_->Insert()). Thus, if two threads Insert() at
about the same time, they can both Lookup(), find nothing, and both
Insert(). The second Insert() would evict the first value, leaving each
thread with a handle on its own version of the data, and with the second
version in the cache. It would be better if both threads ended up with a
handle on the same (key,value) pair, which implies it must be the first item
inserted. This suggests that Insert() should not replace an existing value.
This can be made safe with current usage inside LeveDB itself, but this is
not easy to change first because Cache is a public interface, so to change
the semantics of an existing call might break things, second because Cache
is an abstract virtual class, so adding a new abstract virtual method may
break other implementations, and third, the new method "insert without
replacing" cannot be implemented in terms of the existing methods, so cannot
be implemented with a non-abstract default. But fortunately, the effects
of this issue are minor, so this issue is not fixed by this change.
The changes:
The assumption in the fixes is that it is always better to cache
entries unless removal from the cache would lead to deallocation.
Cache entries now have an "in_cache" boolean indicating whether
the cache has a reference on the entry. The only ways that this can
become false without the entry being passed to its "deleter" are via
Erase(), via Insert() when an element with a duplicate key is inserted,
or on destruction of the cache.
The cache now keeps two linked lists instead of one. All items
in the cache are in one list or the other, and never both. Items
still referenced by clients but erased from the cache are in
neither list. The lists are:
- in-use: contains the items currently referenced by clients, in no particular
order. (This list is used for invariant checking. If we removed the check,
elements that would otherwise be on this list could be left as disconnected
singleton lists.)
- LRU: contains the items not currently referenced by clients, in LRU order
A new internal Ref() method increments the reference count. If
incrementing from 1 to 2 for an item in the cache, it is moved
from the LRU list to the in-use list.
The Unref() call now moves things from the in-use list to the LRU
list if the reference count falls to 1, and the item is in the
cache. It no longer adjusts the usage sum. The usage sum now
reflects only what is in the cache, rather than including
still-referenced items that have been evicted.
The LRU_Append() now takes a "list" parameter so that it can be
used to append either to the LRU list or the in-use list.
Lookup() is modified to use the new Ref() call, rather than
adjusting the reference count and LRU chain directly.
Insert() eviction code is also modified to adjust the usage sum and the
in_cache boolean of the evicted elements. Some LevelDB tests assume that there
will be no caching whatsoever if the cache size is set to zero, so this is
handled as a special case.
A new private method FinishErase() is factored out
with the common code from where items are removed from the cache.
Erase() is modified to adjust the usage sum and the in_cache
boolean of the erased elements, and to use FinishErase().
Prune() is modified to use FinishErase() also, and to make use of the fact that
the lru_ list now contains only items with reference count 1.
- EvictionPolicy is modified to test that an entry with an
outstanding handle is not evicted. This test fails with the old cache.cc.
- A new test case UseExceedsCacheSize verifies that even when the
cache is overfull of entries with outstanding handles, none are
evicted. This test fails with the old cache.cc, and is the key
issue that causes file descriptors to run out when the cache
size is set too small.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=123247237
8年前 fix problems in LevelDB's caching code
Background:
LevelDB uses a cache (util/cache.h, util/cache.cc) of (key,value)
pairs for two purposes:
- a cache of (table, file handle) pairs
- a cache of blocks
The cache places the (key,value) pairs in a reference-counted
wrapper. When it returns a value, it returns a reference to this
wrapper. When the client has finished using the reference and
its enclosed (key,value), it calls Release() to decrement the
reference count.
Each (key,value) pair has an associated resource usage. The
cache maintains the sum of the usages of the elements it holds,
and removes values as needed to keep the sum below a capacity
threshold. It maintains an LRU list so that it will remove the
least-recently used elements first.
The max_open_files option to LevelDB sets the size of the cache
of (table, file handle) pairs. The option is not used in any
other way.
The observed behaviour:
If LevelDB at any time used more file handles concurrently than
the cache size set via max_open_files, it attempted to reduce the
number by evicting entries from the table cache. This could
happen most easily during compaction, and if max_open_files was
low. Because the handles were in use, their reference count did
not drop to zero, and so the usage sum in the cache was not
modified by the evictions. Subsequent Insert() calls returned
valid handles, but their entries were immediately evicted from
the cache, which though empty still acted as though full. As a
result, there was effectively no caching, and the number of open
file handles rose []ly until it hit system-imposed limits and
the process died.
If one set max_open_files lower, the cache was more likely to
exhibit this beahviour, and cause the process to run out of file
descriptors. That is, max_open_files acted in almost exactly the
opposite manner from what was intended.
The problems:
1. The cache kept all elements on its LRU list eligible for capacity
eviction---even those with outstanding references from clients. This was
ineffective in reducing resource consumption because there was an
outstanding reference, guaranteeing that the items remained. A secondary
issue was that there is no guarantee that these in-use items will be the
last things reached in the LRU chain, which actually recorded
"least-recently requested" rather than "least-recently used".
2. The sum of usages was decremented not when a (key,value) was evicted from
the cache, but when its reference count went to zero. Thus, when things
were removed from the cache, either by garbage collection or via Erase(),
the usage sum was not necessarily decreased. This allowed the cache to act
as though full when it was in fact not, reducing caching effectiveness, and
leading to more resources being consumed---the opposite of what the
evictions were intended to achieve.
3. (minor) The cache's clients insert items into it by first looking up the
key, and inserting only if no value is found. Although the cache has an
internal lock, the clients use no locking to ensure atomicity of the
Lookup/Insert pair. (see table/table.cc: block_cache->Insert() and
db/table_cache.cc: cache_->Insert()). Thus, if two threads Insert() at
about the same time, they can both Lookup(), find nothing, and both
Insert(). The second Insert() would evict the first value, leaving each
thread with a handle on its own version of the data, and with the second
version in the cache. It would be better if both threads ended up with a
handle on the same (key,value) pair, which implies it must be the first item
inserted. This suggests that Insert() should not replace an existing value.
This can be made safe with current usage inside LeveDB itself, but this is
not easy to change first because Cache is a public interface, so to change
the semantics of an existing call might break things, second because Cache
is an abstract virtual class, so adding a new abstract virtual method may
break other implementations, and third, the new method "insert without
replacing" cannot be implemented in terms of the existing methods, so cannot
be implemented with a non-abstract default. But fortunately, the effects
of this issue are minor, so this issue is not fixed by this change.
The changes:
The assumption in the fixes is that it is always better to cache
entries unless removal from the cache would lead to deallocation.
Cache entries now have an "in_cache" boolean indicating whether
the cache has a reference on the entry. The only ways that this can
become false without the entry being passed to its "deleter" are via
Erase(), via Insert() when an element with a duplicate key is inserted,
or on destruction of the cache.
The cache now keeps two linked lists instead of one. All items
in the cache are in one list or the other, and never both. Items
still referenced by clients but erased from the cache are in
neither list. The lists are:
- in-use: contains the items currently referenced by clients, in no particular
order. (This list is used for invariant checking. If we removed the check,
elements that would otherwise be on this list could be left as disconnected
singleton lists.)
- LRU: contains the items not currently referenced by clients, in LRU order
A new internal Ref() method increments the reference count. If
incrementing from 1 to 2 for an item in the cache, it is moved
from the LRU list to the in-use list.
The Unref() call now moves things from the in-use list to the LRU
list if the reference count falls to 1, and the item is in the
cache. It no longer adjusts the usage sum. The usage sum now
reflects only what is in the cache, rather than including
still-referenced items that have been evicted.
The LRU_Append() now takes a "list" parameter so that it can be
used to append either to the LRU list or the in-use list.
Lookup() is modified to use the new Ref() call, rather than
adjusting the reference count and LRU chain directly.
Insert() eviction code is also modified to adjust the usage sum and the
in_cache boolean of the evicted elements. Some LevelDB tests assume that there
will be no caching whatsoever if the cache size is set to zero, so this is
handled as a special case.
A new private method FinishErase() is factored out
with the common code from where items are removed from the cache.
Erase() is modified to adjust the usage sum and the in_cache
boolean of the erased elements, and to use FinishErase().
Prune() is modified to use FinishErase() also, and to make use of the fact that
the lru_ list now contains only items with reference count 1.
- EvictionPolicy is modified to test that an entry with an
outstanding handle is not evicted. This test fails with the old cache.cc.
- A new test case UseExceedsCacheSize verifies that even when the
cache is overfull of entries with outstanding handles, none are
evicted. This test fails with the old cache.cc, and is the key
issue that causes file descriptors to run out when the cache
size is set too small.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=123247237
8年前 fix problems in LevelDB's caching code
Background:
LevelDB uses a cache (util/cache.h, util/cache.cc) of (key,value)
pairs for two purposes:
- a cache of (table, file handle) pairs
- a cache of blocks
The cache places the (key,value) pairs in a reference-counted
wrapper. When it returns a value, it returns a reference to this
wrapper. When the client has finished using the reference and
its enclosed (key,value), it calls Release() to decrement the
reference count.
Each (key,value) pair has an associated resource usage. The
cache maintains the sum of the usages of the elements it holds,
and removes values as needed to keep the sum below a capacity
threshold. It maintains an LRU list so that it will remove the
least-recently used elements first.
The max_open_files option to LevelDB sets the size of the cache
of (table, file handle) pairs. The option is not used in any
other way.
The observed behaviour:
If LevelDB at any time used more file handles concurrently than
the cache size set via max_open_files, it attempted to reduce the
number by evicting entries from the table cache. This could
happen most easily during compaction, and if max_open_files was
low. Because the handles were in use, their reference count did
not drop to zero, and so the usage sum in the cache was not
modified by the evictions. Subsequent Insert() calls returned
valid handles, but their entries were immediately evicted from
the cache, which though empty still acted as though full. As a
result, there was effectively no caching, and the number of open
file handles rose []ly until it hit system-imposed limits and
the process died.
If one set max_open_files lower, the cache was more likely to
exhibit this beahviour, and cause the process to run out of file
descriptors. That is, max_open_files acted in almost exactly the
opposite manner from what was intended.
The problems:
1. The cache kept all elements on its LRU list eligible for capacity
eviction---even those with outstanding references from clients. This was
ineffective in reducing resource consumption because there was an
outstanding reference, guaranteeing that the items remained. A secondary
issue was that there is no guarantee that these in-use items will be the
last things reached in the LRU chain, which actually recorded
"least-recently requested" rather than "least-recently used".
2. The sum of usages was decremented not when a (key,value) was evicted from
the cache, but when its reference count went to zero. Thus, when things
were removed from the cache, either by garbage collection or via Erase(),
the usage sum was not necessarily decreased. This allowed the cache to act
as though full when it was in fact not, reducing caching effectiveness, and
leading to more resources being consumed---the opposite of what the
evictions were intended to achieve.
3. (minor) The cache's clients insert items into it by first looking up the
key, and inserting only if no value is found. Although the cache has an
internal lock, the clients use no locking to ensure atomicity of the
Lookup/Insert pair. (see table/table.cc: block_cache->Insert() and
db/table_cache.cc: cache_->Insert()). Thus, if two threads Insert() at
about the same time, they can both Lookup(), find nothing, and both
Insert(). The second Insert() would evict the first value, leaving each
thread with a handle on its own version of the data, and with the second
version in the cache. It would be better if both threads ended up with a
handle on the same (key,value) pair, which implies it must be the first item
inserted. This suggests that Insert() should not replace an existing value.
This can be made safe with current usage inside LeveDB itself, but this is
not easy to change first because Cache is a public interface, so to change
the semantics of an existing call might break things, second because Cache
is an abstract virtual class, so adding a new abstract virtual method may
break other implementations, and third, the new method "insert without
replacing" cannot be implemented in terms of the existing methods, so cannot
be implemented with a non-abstract default. But fortunately, the effects
of this issue are minor, so this issue is not fixed by this change.
The changes:
The assumption in the fixes is that it is always better to cache
entries unless removal from the cache would lead to deallocation.
Cache entries now have an "in_cache" boolean indicating whether
the cache has a reference on the entry. The only ways that this can
become false without the entry being passed to its "deleter" are via
Erase(), via Insert() when an element with a duplicate key is inserted,
or on destruction of the cache.
The cache now keeps two linked lists instead of one. All items
in the cache are in one list or the other, and never both. Items
still referenced by clients but erased from the cache are in
neither list. The lists are:
- in-use: contains the items currently referenced by clients, in no particular
order. (This list is used for invariant checking. If we removed the check,
elements that would otherwise be on this list could be left as disconnected
singleton lists.)
- LRU: contains the items not currently referenced by clients, in LRU order
A new internal Ref() method increments the reference count. If
incrementing from 1 to 2 for an item in the cache, it is moved
from the LRU list to the in-use list.
The Unref() call now moves things from the in-use list to the LRU
list if the reference count falls to 1, and the item is in the
cache. It no longer adjusts the usage sum. The usage sum now
reflects only what is in the cache, rather than including
still-referenced items that have been evicted.
The LRU_Append() now takes a "list" parameter so that it can be
used to append either to the LRU list or the in-use list.
Lookup() is modified to use the new Ref() call, rather than
adjusting the reference count and LRU chain directly.
Insert() eviction code is also modified to adjust the usage sum and the
in_cache boolean of the evicted elements. Some LevelDB tests assume that there
will be no caching whatsoever if the cache size is set to zero, so this is
handled as a special case.
A new private method FinishErase() is factored out
with the common code from where items are removed from the cache.
Erase() is modified to adjust the usage sum and the in_cache
boolean of the erased elements, and to use FinishErase().
Prune() is modified to use FinishErase() also, and to make use of the fact that
the lru_ list now contains only items with reference count 1.
- EvictionPolicy is modified to test that an entry with an
outstanding handle is not evicted. This test fails with the old cache.cc.
- A new test case UseExceedsCacheSize verifies that even when the
cache is overfull of entries with outstanding handles, none are
evicted. This test fails with the old cache.cc, and is the key
issue that causes file descriptors to run out when the cache
size is set too small.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=123247237
8年前 fix problems in LevelDB's caching code
Background:
LevelDB uses a cache (util/cache.h, util/cache.cc) of (key,value)
pairs for two purposes:
- a cache of (table, file handle) pairs
- a cache of blocks
The cache places the (key,value) pairs in a reference-counted
wrapper. When it returns a value, it returns a reference to this
wrapper. When the client has finished using the reference and
its enclosed (key,value), it calls Release() to decrement the
reference count.
Each (key,value) pair has an associated resource usage. The
cache maintains the sum of the usages of the elements it holds,
and removes values as needed to keep the sum below a capacity
threshold. It maintains an LRU list so that it will remove the
least-recently used elements first.
The max_open_files option to LevelDB sets the size of the cache
of (table, file handle) pairs. The option is not used in any
other way.
The observed behaviour:
If LevelDB at any time used more file handles concurrently than
the cache size set via max_open_files, it attempted to reduce the
number by evicting entries from the table cache. This could
happen most easily during compaction, and if max_open_files was
low. Because the handles were in use, their reference count did
not drop to zero, and so the usage sum in the cache was not
modified by the evictions. Subsequent Insert() calls returned
valid handles, but their entries were immediately evicted from
the cache, which though empty still acted as though full. As a
result, there was effectively no caching, and the number of open
file handles rose []ly until it hit system-imposed limits and
the process died.
If one set max_open_files lower, the cache was more likely to
exhibit this beahviour, and cause the process to run out of file
descriptors. That is, max_open_files acted in almost exactly the
opposite manner from what was intended.
The problems:
1. The cache kept all elements on its LRU list eligible for capacity
eviction---even those with outstanding references from clients. This was
ineffective in reducing resource consumption because there was an
outstanding reference, guaranteeing that the items remained. A secondary
issue was that there is no guarantee that these in-use items will be the
last things reached in the LRU chain, which actually recorded
"least-recently requested" rather than "least-recently used".
2. The sum of usages was decremented not when a (key,value) was evicted from
the cache, but when its reference count went to zero. Thus, when things
were removed from the cache, either by garbage collection or via Erase(),
the usage sum was not necessarily decreased. This allowed the cache to act
as though full when it was in fact not, reducing caching effectiveness, and
leading to more resources being consumed---the opposite of what the
evictions were intended to achieve.
3. (minor) The cache's clients insert items into it by first looking up the
key, and inserting only if no value is found. Although the cache has an
internal lock, the clients use no locking to ensure atomicity of the
Lookup/Insert pair. (see table/table.cc: block_cache->Insert() and
db/table_cache.cc: cache_->Insert()). Thus, if two threads Insert() at
about the same time, they can both Lookup(), find nothing, and both
Insert(). The second Insert() would evict the first value, leaving each
thread with a handle on its own version of the data, and with the second
version in the cache. It would be better if both threads ended up with a
handle on the same (key,value) pair, which implies it must be the first item
inserted. This suggests that Insert() should not replace an existing value.
This can be made safe with current usage inside LeveDB itself, but this is
not easy to change first because Cache is a public interface, so to change
the semantics of an existing call might break things, second because Cache
is an abstract virtual class, so adding a new abstract virtual method may
break other implementations, and third, the new method "insert without
replacing" cannot be implemented in terms of the existing methods, so cannot
be implemented with a non-abstract default. But fortunately, the effects
of this issue are minor, so this issue is not fixed by this change.
The changes:
The assumption in the fixes is that it is always better to cache
entries unless removal from the cache would lead to deallocation.
Cache entries now have an "in_cache" boolean indicating whether
the cache has a reference on the entry. The only ways that this can
become false without the entry being passed to its "deleter" are via
Erase(), via Insert() when an element with a duplicate key is inserted,
or on destruction of the cache.
The cache now keeps two linked lists instead of one. All items
in the cache are in one list or the other, and never both. Items
still referenced by clients but erased from the cache are in
neither list. The lists are:
- in-use: contains the items currently referenced by clients, in no particular
order. (This list is used for invariant checking. If we removed the check,
elements that would otherwise be on this list could be left as disconnected
singleton lists.)
- LRU: contains the items not currently referenced by clients, in LRU order
A new internal Ref() method increments the reference count. If
incrementing from 1 to 2 for an item in the cache, it is moved
from the LRU list to the in-use list.
The Unref() call now moves things from the in-use list to the LRU
list if the reference count falls to 1, and the item is in the
cache. It no longer adjusts the usage sum. The usage sum now
reflects only what is in the cache, rather than including
still-referenced items that have been evicted.
The LRU_Append() now takes a "list" parameter so that it can be
used to append either to the LRU list or the in-use list.
Lookup() is modified to use the new Ref() call, rather than
adjusting the reference count and LRU chain directly.
Insert() eviction code is also modified to adjust the usage sum and the
in_cache boolean of the evicted elements. Some LevelDB tests assume that there
will be no caching whatsoever if the cache size is set to zero, so this is
handled as a special case.
A new private method FinishErase() is factored out
with the common code from where items are removed from the cache.
Erase() is modified to adjust the usage sum and the in_cache
boolean of the erased elements, and to use FinishErase().
Prune() is modified to use FinishErase() also, and to make use of the fact that
the lru_ list now contains only items with reference count 1.
- EvictionPolicy is modified to test that an entry with an
outstanding handle is not evicted. This test fails with the old cache.cc.
- A new test case UseExceedsCacheSize verifies that even when the
cache is overfull of entries with outstanding handles, none are
evicted. This test fails with the old cache.cc, and is the key
issue that causes file descriptors to run out when the cache
size is set too small.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=123247237
8年前 fix problems in LevelDB's caching code
Background:
LevelDB uses a cache (util/cache.h, util/cache.cc) of (key,value)
pairs for two purposes:
- a cache of (table, file handle) pairs
- a cache of blocks
The cache places the (key,value) pairs in a reference-counted
wrapper. When it returns a value, it returns a reference to this
wrapper. When the client has finished using the reference and
its enclosed (key,value), it calls Release() to decrement the
reference count.
Each (key,value) pair has an associated resource usage. The
cache maintains the sum of the usages of the elements it holds,
and removes values as needed to keep the sum below a capacity
threshold. It maintains an LRU list so that it will remove the
least-recently used elements first.
The max_open_files option to LevelDB sets the size of the cache
of (table, file handle) pairs. The option is not used in any
other way.
The observed behaviour:
If LevelDB at any time used more file handles concurrently than
the cache size set via max_open_files, it attempted to reduce the
number by evicting entries from the table cache. This could
happen most easily during compaction, and if max_open_files was
low. Because the handles were in use, their reference count did
not drop to zero, and so the usage sum in the cache was not
modified by the evictions. Subsequent Insert() calls returned
valid handles, but their entries were immediately evicted from
the cache, which though empty still acted as though full. As a
result, there was effectively no caching, and the number of open
file handles rose []ly until it hit system-imposed limits and
the process died.
If one set max_open_files lower, the cache was more likely to
exhibit this beahviour, and cause the process to run out of file
descriptors. That is, max_open_files acted in almost exactly the
opposite manner from what was intended.
The problems:
1. The cache kept all elements on its LRU list eligible for capacity
eviction---even those with outstanding references from clients. This was
ineffective in reducing resource consumption because there was an
outstanding reference, guaranteeing that the items remained. A secondary
issue was that there is no guarantee that these in-use items will be the
last things reached in the LRU chain, which actually recorded
"least-recently requested" rather than "least-recently used".
2. The sum of usages was decremented not when a (key,value) was evicted from
the cache, but when its reference count went to zero. Thus, when things
were removed from the cache, either by garbage collection or via Erase(),
the usage sum was not necessarily decreased. This allowed the cache to act
as though full when it was in fact not, reducing caching effectiveness, and
leading to more resources being consumed---the opposite of what the
evictions were intended to achieve.
3. (minor) The cache's clients insert items into it by first looking up the
key, and inserting only if no value is found. Although the cache has an
internal lock, the clients use no locking to ensure atomicity of the
Lookup/Insert pair. (see table/table.cc: block_cache->Insert() and
db/table_cache.cc: cache_->Insert()). Thus, if two threads Insert() at
about the same time, they can both Lookup(), find nothing, and both
Insert(). The second Insert() would evict the first value, leaving each
thread with a handle on its own version of the data, and with the second
version in the cache. It would be better if both threads ended up with a
handle on the same (key,value) pair, which implies it must be the first item
inserted. This suggests that Insert() should not replace an existing value.
This can be made safe with current usage inside LeveDB itself, but this is
not easy to change first because Cache is a public interface, so to change
the semantics of an existing call might break things, second because Cache
is an abstract virtual class, so adding a new abstract virtual method may
break other implementations, and third, the new method "insert without
replacing" cannot be implemented in terms of the existing methods, so cannot
be implemented with a non-abstract default. But fortunately, the effects
of this issue are minor, so this issue is not fixed by this change.
The changes:
The assumption in the fixes is that it is always better to cache
entries unless removal from the cache would lead to deallocation.
Cache entries now have an "in_cache" boolean indicating whether
the cache has a reference on the entry. The only ways that this can
become false without the entry being passed to its "deleter" are via
Erase(), via Insert() when an element with a duplicate key is inserted,
or on destruction of the cache.
The cache now keeps two linked lists instead of one. All items
in the cache are in one list or the other, and never both. Items
still referenced by clients but erased from the cache are in
neither list. The lists are:
- in-use: contains the items currently referenced by clients, in no particular
order. (This list is used for invariant checking. If we removed the check,
elements that would otherwise be on this list could be left as disconnected
singleton lists.)
- LRU: contains the items not currently referenced by clients, in LRU order
A new internal Ref() method increments the reference count. If
incrementing from 1 to 2 for an item in the cache, it is moved
from the LRU list to the in-use list.
The Unref() call now moves things from the in-use list to the LRU
list if the reference count falls to 1, and the item is in the
cache. It no longer adjusts the usage sum. The usage sum now
reflects only what is in the cache, rather than including
still-referenced items that have been evicted.
The LRU_Append() now takes a "list" parameter so that it can be
used to append either to the LRU list or the in-use list.
Lookup() is modified to use the new Ref() call, rather than
adjusting the reference count and LRU chain directly.
Insert() eviction code is also modified to adjust the usage sum and the
in_cache boolean of the evicted elements. Some LevelDB tests assume that there
will be no caching whatsoever if the cache size is set to zero, so this is
handled as a special case.
A new private method FinishErase() is factored out
with the common code from where items are removed from the cache.
Erase() is modified to adjust the usage sum and the in_cache
boolean of the erased elements, and to use FinishErase().
Prune() is modified to use FinishErase() also, and to make use of the fact that
the lru_ list now contains only items with reference count 1.
- EvictionPolicy is modified to test that an entry with an
outstanding handle is not evicted. This test fails with the old cache.cc.
- A new test case UseExceedsCacheSize verifies that even when the
cache is overfull of entries with outstanding handles, none are
evicted. This test fails with the old cache.cc, and is the key
issue that causes file descriptors to run out when the cache
size is set too small.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=123247237
8年前 fix problems in LevelDB's caching code
Background:
LevelDB uses a cache (util/cache.h, util/cache.cc) of (key,value)
pairs for two purposes:
- a cache of (table, file handle) pairs
- a cache of blocks
The cache places the (key,value) pairs in a reference-counted
wrapper. When it returns a value, it returns a reference to this
wrapper. When the client has finished using the reference and
its enclosed (key,value), it calls Release() to decrement the
reference count.
Each (key,value) pair has an associated resource usage. The
cache maintains the sum of the usages of the elements it holds,
and removes values as needed to keep the sum below a capacity
threshold. It maintains an LRU list so that it will remove the
least-recently used elements first.
The max_open_files option to LevelDB sets the size of the cache
of (table, file handle) pairs. The option is not used in any
other way.
The observed behaviour:
If LevelDB at any time used more file handles concurrently than
the cache size set via max_open_files, it attempted to reduce the
number by evicting entries from the table cache. This could
happen most easily during compaction, and if max_open_files was
low. Because the handles were in use, their reference count did
not drop to zero, and so the usage sum in the cache was not
modified by the evictions. Subsequent Insert() calls returned
valid handles, but their entries were immediately evicted from
the cache, which though empty still acted as though full. As a
result, there was effectively no caching, and the number of open
file handles rose []ly until it hit system-imposed limits and
the process died.
If one set max_open_files lower, the cache was more likely to
exhibit this beahviour, and cause the process to run out of file
descriptors. That is, max_open_files acted in almost exactly the
opposite manner from what was intended.
The problems:
1. The cache kept all elements on its LRU list eligible for capacity
eviction---even those with outstanding references from clients. This was
ineffective in reducing resource consumption because there was an
outstanding reference, guaranteeing that the items remained. A secondary
issue was that there is no guarantee that these in-use items will be the
last things reached in the LRU chain, which actually recorded
"least-recently requested" rather than "least-recently used".
2. The sum of usages was decremented not when a (key,value) was evicted from
the cache, but when its reference count went to zero. Thus, when things
were removed from the cache, either by garbage collection or via Erase(),
the usage sum was not necessarily decreased. This allowed the cache to act
as though full when it was in fact not, reducing caching effectiveness, and
leading to more resources being consumed---the opposite of what the
evictions were intended to achieve.
3. (minor) The cache's clients insert items into it by first looking up the
key, and inserting only if no value is found. Although the cache has an
internal lock, the clients use no locking to ensure atomicity of the
Lookup/Insert pair. (see table/table.cc: block_cache->Insert() and
db/table_cache.cc: cache_->Insert()). Thus, if two threads Insert() at
about the same time, they can both Lookup(), find nothing, and both
Insert(). The second Insert() would evict the first value, leaving each
thread with a handle on its own version of the data, and with the second
version in the cache. It would be better if both threads ended up with a
handle on the same (key,value) pair, which implies it must be the first item
inserted. This suggests that Insert() should not replace an existing value.
This can be made safe with current usage inside LeveDB itself, but this is
not easy to change first because Cache is a public interface, so to change
the semantics of an existing call might break things, second because Cache
is an abstract virtual class, so adding a new abstract virtual method may
break other implementations, and third, the new method "insert without
replacing" cannot be implemented in terms of the existing methods, so cannot
be implemented with a non-abstract default. But fortunately, the effects
of this issue are minor, so this issue is not fixed by this change.
The changes:
The assumption in the fixes is that it is always better to cache
entries unless removal from the cache would lead to deallocation.
Cache entries now have an "in_cache" boolean indicating whether
the cache has a reference on the entry. The only ways that this can
become false without the entry being passed to its "deleter" are via
Erase(), via Insert() when an element with a duplicate key is inserted,
or on destruction of the cache.
The cache now keeps two linked lists instead of one. All items
in the cache are in one list or the other, and never both. Items
still referenced by clients but erased from the cache are in
neither list. The lists are:
- in-use: contains the items currently referenced by clients, in no particular
order. (This list is used for invariant checking. If we removed the check,
elements that would otherwise be on this list could be left as disconnected
singleton lists.)
- LRU: contains the items not currently referenced by clients, in LRU order
A new internal Ref() method increments the reference count. If
incrementing from 1 to 2 for an item in the cache, it is moved
from the LRU list to the in-use list.
The Unref() call now moves things from the in-use list to the LRU
list if the reference count falls to 1, and the item is in the
cache. It no longer adjusts the usage sum. The usage sum now
reflects only what is in the cache, rather than including
still-referenced items that have been evicted.
The LRU_Append() now takes a "list" parameter so that it can be
used to append either to the LRU list or the in-use list.
Lookup() is modified to use the new Ref() call, rather than
adjusting the reference count and LRU chain directly.
Insert() eviction code is also modified to adjust the usage sum and the
in_cache boolean of the evicted elements. Some LevelDB tests assume that there
will be no caching whatsoever if the cache size is set to zero, so this is
handled as a special case.
A new private method FinishErase() is factored out
with the common code from where items are removed from the cache.
Erase() is modified to adjust the usage sum and the in_cache
boolean of the erased elements, and to use FinishErase().
Prune() is modified to use FinishErase() also, and to make use of the fact that
the lru_ list now contains only items with reference count 1.
- EvictionPolicy is modified to test that an entry with an
outstanding handle is not evicted. This test fails with the old cache.cc.
- A new test case UseExceedsCacheSize verifies that even when the
cache is overfull of entries with outstanding handles, none are
evicted. This test fails with the old cache.cc, and is the key
issue that causes file descriptors to run out when the cache
size is set too small.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=123247237
8年前 fix problems in LevelDB's caching code
Background:
LevelDB uses a cache (util/cache.h, util/cache.cc) of (key,value)
pairs for two purposes:
- a cache of (table, file handle) pairs
- a cache of blocks
The cache places the (key,value) pairs in a reference-counted
wrapper. When it returns a value, it returns a reference to this
wrapper. When the client has finished using the reference and
its enclosed (key,value), it calls Release() to decrement the
reference count.
Each (key,value) pair has an associated resource usage. The
cache maintains the sum of the usages of the elements it holds,
and removes values as needed to keep the sum below a capacity
threshold. It maintains an LRU list so that it will remove the
least-recently used elements first.
The max_open_files option to LevelDB sets the size of the cache
of (table, file handle) pairs. The option is not used in any
other way.
The observed behaviour:
If LevelDB at any time used more file handles concurrently than
the cache size set via max_open_files, it attempted to reduce the
number by evicting entries from the table cache. This could
happen most easily during compaction, and if max_open_files was
low. Because the handles were in use, their reference count did
not drop to zero, and so the usage sum in the cache was not
modified by the evictions. Subsequent Insert() calls returned
valid handles, but their entries were immediately evicted from
the cache, which though empty still acted as though full. As a
result, there was effectively no caching, and the number of open
file handles rose []ly until it hit system-imposed limits and
the process died.
If one set max_open_files lower, the cache was more likely to
exhibit this beahviour, and cause the process to run out of file
descriptors. That is, max_open_files acted in almost exactly the
opposite manner from what was intended.
The problems:
1. The cache kept all elements on its LRU list eligible for capacity
eviction---even those with outstanding references from clients. This was
ineffective in reducing resource consumption because there was an
outstanding reference, guaranteeing that the items remained. A secondary
issue was that there is no guarantee that these in-use items will be the
last things reached in the LRU chain, which actually recorded
"least-recently requested" rather than "least-recently used".
2. The sum of usages was decremented not when a (key,value) was evicted from
the cache, but when its reference count went to zero. Thus, when things
were removed from the cache, either by garbage collection or via Erase(),
the usage sum was not necessarily decreased. This allowed the cache to act
as though full when it was in fact not, reducing caching effectiveness, and
leading to more resources being consumed---the opposite of what the
evictions were intended to achieve.
3. (minor) The cache's clients insert items into it by first looking up the
key, and inserting only if no value is found. Although the cache has an
internal lock, the clients use no locking to ensure atomicity of the
Lookup/Insert pair. (see table/table.cc: block_cache->Insert() and
db/table_cache.cc: cache_->Insert()). Thus, if two threads Insert() at
about the same time, they can both Lookup(), find nothing, and both
Insert(). The second Insert() would evict the first value, leaving each
thread with a handle on its own version of the data, and with the second
version in the cache. It would be better if both threads ended up with a
handle on the same (key,value) pair, which implies it must be the first item
inserted. This suggests that Insert() should not replace an existing value.
This can be made safe with current usage inside LeveDB itself, but this is
not easy to change first because Cache is a public interface, so to change
the semantics of an existing call might break things, second because Cache
is an abstract virtual class, so adding a new abstract virtual method may
break other implementations, and third, the new method "insert without
replacing" cannot be implemented in terms of the existing methods, so cannot
be implemented with a non-abstract default. But fortunately, the effects
of this issue are minor, so this issue is not fixed by this change.
The changes:
The assumption in the fixes is that it is always better to cache
entries unless removal from the cache would lead to deallocation.
Cache entries now have an "in_cache" boolean indicating whether
the cache has a reference on the entry. The only ways that this can
become false without the entry being passed to its "deleter" are via
Erase(), via Insert() when an element with a duplicate key is inserted,
or on destruction of the cache.
The cache now keeps two linked lists instead of one. All items
in the cache are in one list or the other, and never both. Items
still referenced by clients but erased from the cache are in
neither list. The lists are:
- in-use: contains the items currently referenced by clients, in no particular
order. (This list is used for invariant checking. If we removed the check,
elements that would otherwise be on this list could be left as disconnected
singleton lists.)
- LRU: contains the items not currently referenced by clients, in LRU order
A new internal Ref() method increments the reference count. If
incrementing from 1 to 2 for an item in the cache, it is moved
from the LRU list to the in-use list.
The Unref() call now moves things from the in-use list to the LRU
list if the reference count falls to 1, and the item is in the
cache. It no longer adjusts the usage sum. The usage sum now
reflects only what is in the cache, rather than including
still-referenced items that have been evicted.
The LRU_Append() now takes a "list" parameter so that it can be
used to append either to the LRU list or the in-use list.
Lookup() is modified to use the new Ref() call, rather than
adjusting the reference count and LRU chain directly.
Insert() eviction code is also modified to adjust the usage sum and the
in_cache boolean of the evicted elements. Some LevelDB tests assume that there
will be no caching whatsoever if the cache size is set to zero, so this is
handled as a special case.
A new private method FinishErase() is factored out
with the common code from where items are removed from the cache.
Erase() is modified to adjust the usage sum and the in_cache
boolean of the erased elements, and to use FinishErase().
Prune() is modified to use FinishErase() also, and to make use of the fact that
the lru_ list now contains only items with reference count 1.
- EvictionPolicy is modified to test that an entry with an
outstanding handle is not evicted. This test fails with the old cache.cc.
- A new test case UseExceedsCacheSize verifies that even when the
cache is overfull of entries with outstanding handles, none are
evicted. This test fails with the old cache.cc, and is the key
issue that causes file descriptors to run out when the cache
size is set too small.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=123247237
8年前 fix problems in LevelDB's caching code
Background:
LevelDB uses a cache (util/cache.h, util/cache.cc) of (key,value)
pairs for two purposes:
- a cache of (table, file handle) pairs
- a cache of blocks
The cache places the (key,value) pairs in a reference-counted
wrapper. When it returns a value, it returns a reference to this
wrapper. When the client has finished using the reference and
its enclosed (key,value), it calls Release() to decrement the
reference count.
Each (key,value) pair has an associated resource usage. The
cache maintains the sum of the usages of the elements it holds,
and removes values as needed to keep the sum below a capacity
threshold. It maintains an LRU list so that it will remove the
least-recently used elements first.
The max_open_files option to LevelDB sets the size of the cache
of (table, file handle) pairs. The option is not used in any
other way.
The observed behaviour:
If LevelDB at any time used more file handles concurrently than
the cache size set via max_open_files, it attempted to reduce the
number by evicting entries from the table cache. This could
happen most easily during compaction, and if max_open_files was
low. Because the handles were in use, their reference count did
not drop to zero, and so the usage sum in the cache was not
modified by the evictions. Subsequent Insert() calls returned
valid handles, but their entries were immediately evicted from
the cache, which though empty still acted as though full. As a
result, there was effectively no caching, and the number of open
file handles rose []ly until it hit system-imposed limits and
the process died.
If one set max_open_files lower, the cache was more likely to
exhibit this beahviour, and cause the process to run out of file
descriptors. That is, max_open_files acted in almost exactly the
opposite manner from what was intended.
The problems:
1. The cache kept all elements on its LRU list eligible for capacity
eviction---even those with outstanding references from clients. This was
ineffective in reducing resource consumption because there was an
outstanding reference, guaranteeing that the items remained. A secondary
issue was that there is no guarantee that these in-use items will be the
last things reached in the LRU chain, which actually recorded
"least-recently requested" rather than "least-recently used".
2. The sum of usages was decremented not when a (key,value) was evicted from
the cache, but when its reference count went to zero. Thus, when things
were removed from the cache, either by garbage collection or via Erase(),
the usage sum was not necessarily decreased. This allowed the cache to act
as though full when it was in fact not, reducing caching effectiveness, and
leading to more resources being consumed---the opposite of what the
evictions were intended to achieve.
3. (minor) The cache's clients insert items into it by first looking up the
key, and inserting only if no value is found. Although the cache has an
internal lock, the clients use no locking to ensure atomicity of the
Lookup/Insert pair. (see table/table.cc: block_cache->Insert() and
db/table_cache.cc: cache_->Insert()). Thus, if two threads Insert() at
about the same time, they can both Lookup(), find nothing, and both
Insert(). The second Insert() would evict the first value, leaving each
thread with a handle on its own version of the data, and with the second
version in the cache. It would be better if both threads ended up with a
handle on the same (key,value) pair, which implies it must be the first item
inserted. This suggests that Insert() should not replace an existing value.
This can be made safe with current usage inside LeveDB itself, but this is
not easy to change first because Cache is a public interface, so to change
the semantics of an existing call might break things, second because Cache
is an abstract virtual class, so adding a new abstract virtual method may
break other implementations, and third, the new method "insert without
replacing" cannot be implemented in terms of the existing methods, so cannot
be implemented with a non-abstract default. But fortunately, the effects
of this issue are minor, so this issue is not fixed by this change.
The changes:
The assumption in the fixes is that it is always better to cache
entries unless removal from the cache would lead to deallocation.
Cache entries now have an "in_cache" boolean indicating whether
the cache has a reference on the entry. The only ways that this can
become false without the entry being passed to its "deleter" are via
Erase(), via Insert() when an element with a duplicate key is inserted,
or on destruction of the cache.
The cache now keeps two linked lists instead of one. All items
in the cache are in one list or the other, and never both. Items
still referenced by clients but erased from the cache are in
neither list. The lists are:
- in-use: contains the items currently referenced by clients, in no particular
order. (This list is used for invariant checking. If we removed the check,
elements that would otherwise be on this list could be left as disconnected
singleton lists.)
- LRU: contains the items not currently referenced by clients, in LRU order
A new internal Ref() method increments the reference count. If
incrementing from 1 to 2 for an item in the cache, it is moved
from the LRU list to the in-use list.
The Unref() call now moves things from the in-use list to the LRU
list if the reference count falls to 1, and the item is in the
cache. It no longer adjusts the usage sum. The usage sum now
reflects only what is in the cache, rather than including
still-referenced items that have been evicted.
The LRU_Append() now takes a "list" parameter so that it can be
used to append either to the LRU list or the in-use list.
Lookup() is modified to use the new Ref() call, rather than
adjusting the reference count and LRU chain directly.
Insert() eviction code is also modified to adjust the usage sum and the
in_cache boolean of the evicted elements. Some LevelDB tests assume that there
will be no caching whatsoever if the cache size is set to zero, so this is
handled as a special case.
A new private method FinishErase() is factored out
with the common code from where items are removed from the cache.
Erase() is modified to adjust the usage sum and the in_cache
boolean of the erased elements, and to use FinishErase().
Prune() is modified to use FinishErase() also, and to make use of the fact that
the lru_ list now contains only items with reference count 1.
- EvictionPolicy is modified to test that an entry with an
outstanding handle is not evicted. This test fails with the old cache.cc.
- A new test case UseExceedsCacheSize verifies that even when the
cache is overfull of entries with outstanding handles, none are
evicted. This test fails with the old cache.cc, and is the key
issue that causes file descriptors to run out when the cache
size is set too small.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=123247237
8年前 fix problems in LevelDB's caching code
Background:
LevelDB uses a cache (util/cache.h, util/cache.cc) of (key,value)
pairs for two purposes:
- a cache of (table, file handle) pairs
- a cache of blocks
The cache places the (key,value) pairs in a reference-counted
wrapper. When it returns a value, it returns a reference to this
wrapper. When the client has finished using the reference and
its enclosed (key,value), it calls Release() to decrement the
reference count.
Each (key,value) pair has an associated resource usage. The
cache maintains the sum of the usages of the elements it holds,
and removes values as needed to keep the sum below a capacity
threshold. It maintains an LRU list so that it will remove the
least-recently used elements first.
The max_open_files option to LevelDB sets the size of the cache
of (table, file handle) pairs. The option is not used in any
other way.
The observed behaviour:
If LevelDB at any time used more file handles concurrently than
the cache size set via max_open_files, it attempted to reduce the
number by evicting entries from the table cache. This could
happen most easily during compaction, and if max_open_files was
low. Because the handles were in use, their reference count did
not drop to zero, and so the usage sum in the cache was not
modified by the evictions. Subsequent Insert() calls returned
valid handles, but their entries were immediately evicted from
the cache, which though empty still acted as though full. As a
result, there was effectively no caching, and the number of open
file handles rose []ly until it hit system-imposed limits and
the process died.
If one set max_open_files lower, the cache was more likely to
exhibit this beahviour, and cause the process to run out of file
descriptors. That is, max_open_files acted in almost exactly the
opposite manner from what was intended.
The problems:
1. The cache kept all elements on its LRU list eligible for capacity
eviction---even those with outstanding references from clients. This was
ineffective in reducing resource consumption because there was an
outstanding reference, guaranteeing that the items remained. A secondary
issue was that there is no guarantee that these in-use items will be the
last things reached in the LRU chain, which actually recorded
"least-recently requested" rather than "least-recently used".
2. The sum of usages was decremented not when a (key,value) was evicted from
the cache, but when its reference count went to zero. Thus, when things
were removed from the cache, either by garbage collection or via Erase(),
the usage sum was not necessarily decreased. This allowed the cache to act
as though full when it was in fact not, reducing caching effectiveness, and
leading to more resources being consumed---the opposite of what the
evictions were intended to achieve.
3. (minor) The cache's clients insert items into it by first looking up the
key, and inserting only if no value is found. Although the cache has an
internal lock, the clients use no locking to ensure atomicity of the
Lookup/Insert pair. (see table/table.cc: block_cache->Insert() and
db/table_cache.cc: cache_->Insert()). Thus, if two threads Insert() at
about the same time, they can both Lookup(), find nothing, and both
Insert(). The second Insert() would evict the first value, leaving each
thread with a handle on its own version of the data, and with the second
version in the cache. It would be better if both threads ended up with a
handle on the same (key,value) pair, which implies it must be the first item
inserted. This suggests that Insert() should not replace an existing value.
This can be made safe with current usage inside LeveDB itself, but this is
not easy to change first because Cache is a public interface, so to change
the semantics of an existing call might break things, second because Cache
is an abstract virtual class, so adding a new abstract virtual method may
break other implementations, and third, the new method "insert without
replacing" cannot be implemented in terms of the existing methods, so cannot
be implemented with a non-abstract default. But fortunately, the effects
of this issue are minor, so this issue is not fixed by this change.
The changes:
The assumption in the fixes is that it is always better to cache
entries unless removal from the cache would lead to deallocation.
Cache entries now have an "in_cache" boolean indicating whether
the cache has a reference on the entry. The only ways that this can
become false without the entry being passed to its "deleter" are via
Erase(), via Insert() when an element with a duplicate key is inserted,
or on destruction of the cache.
The cache now keeps two linked lists instead of one. All items
in the cache are in one list or the other, and never both. Items
still referenced by clients but erased from the cache are in
neither list. The lists are:
- in-use: contains the items currently referenced by clients, in no particular
order. (This list is used for invariant checking. If we removed the check,
elements that would otherwise be on this list could be left as disconnected
singleton lists.)
- LRU: contains the items not currently referenced by clients, in LRU order
A new internal Ref() method increments the reference count. If
incrementing from 1 to 2 for an item in the cache, it is moved
from the LRU list to the in-use list.
The Unref() call now moves things from the in-use list to the LRU
list if the reference count falls to 1, and the item is in the
cache. It no longer adjusts the usage sum. The usage sum now
reflects only what is in the cache, rather than including
still-referenced items that have been evicted.
The LRU_Append() now takes a "list" parameter so that it can be
used to append either to the LRU list or the in-use list.
Lookup() is modified to use the new Ref() call, rather than
adjusting the reference count and LRU chain directly.
Insert() eviction code is also modified to adjust the usage sum and the
in_cache boolean of the evicted elements. Some LevelDB tests assume that there
will be no caching whatsoever if the cache size is set to zero, so this is
handled as a special case.
A new private method FinishErase() is factored out
with the common code from where items are removed from the cache.
Erase() is modified to adjust the usage sum and the in_cache
boolean of the erased elements, and to use FinishErase().
Prune() is modified to use FinishErase() also, and to make use of the fact that
the lru_ list now contains only items with reference count 1.
- EvictionPolicy is modified to test that an entry with an
outstanding handle is not evicted. This test fails with the old cache.cc.
- A new test case UseExceedsCacheSize verifies that even when the
cache is overfull of entries with outstanding handles, none are
evicted. This test fails with the old cache.cc, and is the key
issue that causes file descriptors to run out when the cache
size is set too small.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=123247237
8年前 fix problems in LevelDB's caching code
Background:
LevelDB uses a cache (util/cache.h, util/cache.cc) of (key,value)
pairs for two purposes:
- a cache of (table, file handle) pairs
- a cache of blocks
The cache places the (key,value) pairs in a reference-counted
wrapper. When it returns a value, it returns a reference to this
wrapper. When the client has finished using the reference and
its enclosed (key,value), it calls Release() to decrement the
reference count.
Each (key,value) pair has an associated resource usage. The
cache maintains the sum of the usages of the elements it holds,
and removes values as needed to keep the sum below a capacity
threshold. It maintains an LRU list so that it will remove the
least-recently used elements first.
The max_open_files option to LevelDB sets the size of the cache
of (table, file handle) pairs. The option is not used in any
other way.
The observed behaviour:
If LevelDB at any time used more file handles concurrently than
the cache size set via max_open_files, it attempted to reduce the
number by evicting entries from the table cache. This could
happen most easily during compaction, and if max_open_files was
low. Because the handles were in use, their reference count did
not drop to zero, and so the usage sum in the cache was not
modified by the evictions. Subsequent Insert() calls returned
valid handles, but their entries were immediately evicted from
the cache, which though empty still acted as though full. As a
result, there was effectively no caching, and the number of open
file handles rose []ly until it hit system-imposed limits and
the process died.
If one set max_open_files lower, the cache was more likely to
exhibit this beahviour, and cause the process to run out of file
descriptors. That is, max_open_files acted in almost exactly the
opposite manner from what was intended.
The problems:
1. The cache kept all elements on its LRU list eligible for capacity
eviction---even those with outstanding references from clients. This was
ineffective in reducing resource consumption because there was an
outstanding reference, guaranteeing that the items remained. A secondary
issue was that there is no guarantee that these in-use items will be the
last things reached in the LRU chain, which actually recorded
"least-recently requested" rather than "least-recently used".
2. The sum of usages was decremented not when a (key,value) was evicted from
the cache, but when its reference count went to zero. Thus, when things
were removed from the cache, either by garbage collection or via Erase(),
the usage sum was not necessarily decreased. This allowed the cache to act
as though full when it was in fact not, reducing caching effectiveness, and
leading to more resources being consumed---the opposite of what the
evictions were intended to achieve.
3. (minor) The cache's clients insert items into it by first looking up the
key, and inserting only if no value is found. Although the cache has an
internal lock, the clients use no locking to ensure atomicity of the
Lookup/Insert pair. (see table/table.cc: block_cache->Insert() and
db/table_cache.cc: cache_->Insert()). Thus, if two threads Insert() at
about the same time, they can both Lookup(), find nothing, and both
Insert(). The second Insert() would evict the first value, leaving each
thread with a handle on its own version of the data, and with the second
version in the cache. It would be better if both threads ended up with a
handle on the same (key,value) pair, which implies it must be the first item
inserted. This suggests that Insert() should not replace an existing value.
This can be made safe with current usage inside LeveDB itself, but this is
not easy to change first because Cache is a public interface, so to change
the semantics of an existing call might break things, second because Cache
is an abstract virtual class, so adding a new abstract virtual method may
break other implementations, and third, the new method "insert without
replacing" cannot be implemented in terms of the existing methods, so cannot
be implemented with a non-abstract default. But fortunately, the effects
of this issue are minor, so this issue is not fixed by this change.
The changes:
The assumption in the fixes is that it is always better to cache
entries unless removal from the cache would lead to deallocation.
Cache entries now have an "in_cache" boolean indicating whether
the cache has a reference on the entry. The only ways that this can
become false without the entry being passed to its "deleter" are via
Erase(), via Insert() when an element with a duplicate key is inserted,
or on destruction of the cache.
The cache now keeps two linked lists instead of one. All items
in the cache are in one list or the other, and never both. Items
still referenced by clients but erased from the cache are in
neither list. The lists are:
- in-use: contains the items currently referenced by clients, in no particular
order. (This list is used for invariant checking. If we removed the check,
elements that would otherwise be on this list could be left as disconnected
singleton lists.)
- LRU: contains the items not currently referenced by clients, in LRU order
A new internal Ref() method increments the reference count. If
incrementing from 1 to 2 for an item in the cache, it is moved
from the LRU list to the in-use list.
The Unref() call now moves things from the in-use list to the LRU
list if the reference count falls to 1, and the item is in the
cache. It no longer adjusts the usage sum. The usage sum now
reflects only what is in the cache, rather than including
still-referenced items that have been evicted.
The LRU_Append() now takes a "list" parameter so that it can be
used to append either to the LRU list or the in-use list.
Lookup() is modified to use the new Ref() call, rather than
adjusting the reference count and LRU chain directly.
Insert() eviction code is also modified to adjust the usage sum and the
in_cache boolean of the evicted elements. Some LevelDB tests assume that there
will be no caching whatsoever if the cache size is set to zero, so this is
handled as a special case.
A new private method FinishErase() is factored out
with the common code from where items are removed from the cache.
Erase() is modified to adjust the usage sum and the in_cache
boolean of the erased elements, and to use FinishErase().
Prune() is modified to use FinishErase() also, and to make use of the fact that
the lru_ list now contains only items with reference count 1.
- EvictionPolicy is modified to test that an entry with an
outstanding handle is not evicted. This test fails with the old cache.cc.
- A new test case UseExceedsCacheSize verifies that even when the
cache is overfull of entries with outstanding handles, none are
evicted. This test fails with the old cache.cc, and is the key
issue that causes file descriptors to run out when the cache
size is set too small.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=123247237
8年前 fix problems in LevelDB's caching code
Background:
LevelDB uses a cache (util/cache.h, util/cache.cc) of (key,value)
pairs for two purposes:
- a cache of (table, file handle) pairs
- a cache of blocks
The cache places the (key,value) pairs in a reference-counted
wrapper. When it returns a value, it returns a reference to this
wrapper. When the client has finished using the reference and
its enclosed (key,value), it calls Release() to decrement the
reference count.
Each (key,value) pair has an associated resource usage. The
cache maintains the sum of the usages of the elements it holds,
and removes values as needed to keep the sum below a capacity
threshold. It maintains an LRU list so that it will remove the
least-recently used elements first.
The max_open_files option to LevelDB sets the size of the cache
of (table, file handle) pairs. The option is not used in any
other way.
The observed behaviour:
If LevelDB at any time used more file handles concurrently than
the cache size set via max_open_files, it attempted to reduce the
number by evicting entries from the table cache. This could
happen most easily during compaction, and if max_open_files was
low. Because the handles were in use, their reference count did
not drop to zero, and so the usage sum in the cache was not
modified by the evictions. Subsequent Insert() calls returned
valid handles, but their entries were immediately evicted from
the cache, which though empty still acted as though full. As a
result, there was effectively no caching, and the number of open
file handles rose []ly until it hit system-imposed limits and
the process died.
If one set max_open_files lower, the cache was more likely to
exhibit this beahviour, and cause the process to run out of file
descriptors. That is, max_open_files acted in almost exactly the
opposite manner from what was intended.
The problems:
1. The cache kept all elements on its LRU list eligible for capacity
eviction---even those with outstanding references from clients. This was
ineffective in reducing resource consumption because there was an
outstanding reference, guaranteeing that the items remained. A secondary
issue was that there is no guarantee that these in-use items will be the
last things reached in the LRU chain, which actually recorded
"least-recently requested" rather than "least-recently used".
2. The sum of usages was decremented not when a (key,value) was evicted from
the cache, but when its reference count went to zero. Thus, when things
were removed from the cache, either by garbage collection or via Erase(),
the usage sum was not necessarily decreased. This allowed the cache to act
as though full when it was in fact not, reducing caching effectiveness, and
leading to more resources being consumed---the opposite of what the
evictions were intended to achieve.
3. (minor) The cache's clients insert items into it by first looking up the
key, and inserting only if no value is found. Although the cache has an
internal lock, the clients use no locking to ensure atomicity of the
Lookup/Insert pair. (see table/table.cc: block_cache->Insert() and
db/table_cache.cc: cache_->Insert()). Thus, if two threads Insert() at
about the same time, they can both Lookup(), find nothing, and both
Insert(). The second Insert() would evict the first value, leaving each
thread with a handle on its own version of the data, and with the second
version in the cache. It would be better if both threads ended up with a
handle on the same (key,value) pair, which implies it must be the first item
inserted. This suggests that Insert() should not replace an existing value.
This can be made safe with current usage inside LeveDB itself, but this is
not easy to change first because Cache is a public interface, so to change
the semantics of an existing call might break things, second because Cache
is an abstract virtual class, so adding a new abstract virtual method may
break other implementations, and third, the new method "insert without
replacing" cannot be implemented in terms of the existing methods, so cannot
be implemented with a non-abstract default. But fortunately, the effects
of this issue are minor, so this issue is not fixed by this change.
The changes:
The assumption in the fixes is that it is always better to cache
entries unless removal from the cache would lead to deallocation.
Cache entries now have an "in_cache" boolean indicating whether
the cache has a reference on the entry. The only ways that this can
become false without the entry being passed to its "deleter" are via
Erase(), via Insert() when an element with a duplicate key is inserted,
or on destruction of the cache.
The cache now keeps two linked lists instead of one. All items
in the cache are in one list or the other, and never both. Items
still referenced by clients but erased from the cache are in
neither list. The lists are:
- in-use: contains the items currently referenced by clients, in no particular
order. (This list is used for invariant checking. If we removed the check,
elements that would otherwise be on this list could be left as disconnected
singleton lists.)
- LRU: contains the items not currently referenced by clients, in LRU order
A new internal Ref() method increments the reference count. If
incrementing from 1 to 2 for an item in the cache, it is moved
from the LRU list to the in-use list.
The Unref() call now moves things from the in-use list to the LRU
list if the reference count falls to 1, and the item is in the
cache. It no longer adjusts the usage sum. The usage sum now
reflects only what is in the cache, rather than including
still-referenced items that have been evicted.
The LRU_Append() now takes a "list" parameter so that it can be
used to append either to the LRU list or the in-use list.
Lookup() is modified to use the new Ref() call, rather than
adjusting the reference count and LRU chain directly.
Insert() eviction code is also modified to adjust the usage sum and the
in_cache boolean of the evicted elements. Some LevelDB tests assume that there
will be no caching whatsoever if the cache size is set to zero, so this is
handled as a special case.
A new private method FinishErase() is factored out
with the common code from where items are removed from the cache.
Erase() is modified to adjust the usage sum and the in_cache
boolean of the erased elements, and to use FinishErase().
Prune() is modified to use FinishErase() also, and to make use of the fact that
the lru_ list now contains only items with reference count 1.
- EvictionPolicy is modified to test that an entry with an
outstanding handle is not evicted. This test fails with the old cache.cc.
- A new test case UseExceedsCacheSize verifies that even when the
cache is overfull of entries with outstanding handles, none are
evicted. This test fails with the old cache.cc, and is the key
issue that causes file descriptors to run out when the cache
size is set too small.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=123247237
8年前 fix problems in LevelDB's caching code
Background:
LevelDB uses a cache (util/cache.h, util/cache.cc) of (key,value)
pairs for two purposes:
- a cache of (table, file handle) pairs
- a cache of blocks
The cache places the (key,value) pairs in a reference-counted
wrapper. When it returns a value, it returns a reference to this
wrapper. When the client has finished using the reference and
its enclosed (key,value), it calls Release() to decrement the
reference count.
Each (key,value) pair has an associated resource usage. The
cache maintains the sum of the usages of the elements it holds,
and removes values as needed to keep the sum below a capacity
threshold. It maintains an LRU list so that it will remove the
least-recently used elements first.
The max_open_files option to LevelDB sets the size of the cache
of (table, file handle) pairs. The option is not used in any
other way.
The observed behaviour:
If LevelDB at any time used more file handles concurrently than
the cache size set via max_open_files, it attempted to reduce the
number by evicting entries from the table cache. This could
happen most easily during compaction, and if max_open_files was
low. Because the handles were in use, their reference count did
not drop to zero, and so the usage sum in the cache was not
modified by the evictions. Subsequent Insert() calls returned
valid handles, but their entries were immediately evicted from
the cache, which though empty still acted as though full. As a
result, there was effectively no caching, and the number of open
file handles rose []ly until it hit system-imposed limits and
the process died.
If one set max_open_files lower, the cache was more likely to
exhibit this beahviour, and cause the process to run out of file
descriptors. That is, max_open_files acted in almost exactly the
opposite manner from what was intended.
The problems:
1. The cache kept all elements on its LRU list eligible for capacity
eviction---even those with outstanding references from clients. This was
ineffective in reducing resource consumption because there was an
outstanding reference, guaranteeing that the items remained. A secondary
issue was that there is no guarantee that these in-use items will be the
last things reached in the LRU chain, which actually recorded
"least-recently requested" rather than "least-recently used".
2. The sum of usages was decremented not when a (key,value) was evicted from
the cache, but when its reference count went to zero. Thus, when things
were removed from the cache, either by garbage collection or via Erase(),
the usage sum was not necessarily decreased. This allowed the cache to act
as though full when it was in fact not, reducing caching effectiveness, and
leading to more resources being consumed---the opposite of what the
evictions were intended to achieve.
3. (minor) The cache's clients insert items into it by first looking up the
key, and inserting only if no value is found. Although the cache has an
internal lock, the clients use no locking to ensure atomicity of the
Lookup/Insert pair. (see table/table.cc: block_cache->Insert() and
db/table_cache.cc: cache_->Insert()). Thus, if two threads Insert() at
about the same time, they can both Lookup(), find nothing, and both
Insert(). The second Insert() would evict the first value, leaving each
thread with a handle on its own version of the data, and with the second
version in the cache. It would be better if both threads ended up with a
handle on the same (key,value) pair, which implies it must be the first item
inserted. This suggests that Insert() should not replace an existing value.
This can be made safe with current usage inside LeveDB itself, but this is
not easy to change first because Cache is a public interface, so to change
the semantics of an existing call might break things, second because Cache
is an abstract virtual class, so adding a new abstract virtual method may
break other implementations, and third, the new method "insert without
replacing" cannot be implemented in terms of the existing methods, so cannot
be implemented with a non-abstract default. But fortunately, the effects
of this issue are minor, so this issue is not fixed by this change.
The changes:
The assumption in the fixes is that it is always better to cache
entries unless removal from the cache would lead to deallocation.
Cache entries now have an "in_cache" boolean indicating whether
the cache has a reference on the entry. The only ways that this can
become false without the entry being passed to its "deleter" are via
Erase(), via Insert() when an element with a duplicate key is inserted,
or on destruction of the cache.
The cache now keeps two linked lists instead of one. All items
in the cache are in one list or the other, and never both. Items
still referenced by clients but erased from the cache are in
neither list. The lists are:
- in-use: contains the items currently referenced by clients, in no particular
order. (This list is used for invariant checking. If we removed the check,
elements that would otherwise be on this list could be left as disconnected
singleton lists.)
- LRU: contains the items not currently referenced by clients, in LRU order
A new internal Ref() method increments the reference count. If
incrementing from 1 to 2 for an item in the cache, it is moved
from the LRU list to the in-use list.
The Unref() call now moves things from the in-use list to the LRU
list if the reference count falls to 1, and the item is in the
cache. It no longer adjusts the usage sum. The usage sum now
reflects only what is in the cache, rather than including
still-referenced items that have been evicted.
The LRU_Append() now takes a "list" parameter so that it can be
used to append either to the LRU list or the in-use list.
Lookup() is modified to use the new Ref() call, rather than
adjusting the reference count and LRU chain directly.
Insert() eviction code is also modified to adjust the usage sum and the
in_cache boolean of the evicted elements. Some LevelDB tests assume that there
will be no caching whatsoever if the cache size is set to zero, so this is
handled as a special case.
A new private method FinishErase() is factored out
with the common code from where items are removed from the cache.
Erase() is modified to adjust the usage sum and the in_cache
boolean of the erased elements, and to use FinishErase().
Prune() is modified to use FinishErase() also, and to make use of the fact that
the lru_ list now contains only items with reference count 1.
- EvictionPolicy is modified to test that an entry with an
outstanding handle is not evicted. This test fails with the old cache.cc.
- A new test case UseExceedsCacheSize verifies that even when the
cache is overfull of entries with outstanding handles, none are
evicted. This test fails with the old cache.cc, and is the key
issue that causes file descriptors to run out when the cache
size is set too small.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=123247237
8年前 fix problems in LevelDB's caching code
Background:
LevelDB uses a cache (util/cache.h, util/cache.cc) of (key,value)
pairs for two purposes:
- a cache of (table, file handle) pairs
- a cache of blocks
The cache places the (key,value) pairs in a reference-counted
wrapper. When it returns a value, it returns a reference to this
wrapper. When the client has finished using the reference and
its enclosed (key,value), it calls Release() to decrement the
reference count.
Each (key,value) pair has an associated resource usage. The
cache maintains the sum of the usages of the elements it holds,
and removes values as needed to keep the sum below a capacity
threshold. It maintains an LRU list so that it will remove the
least-recently used elements first.
The max_open_files option to LevelDB sets the size of the cache
of (table, file handle) pairs. The option is not used in any
other way.
The observed behaviour:
If LevelDB at any time used more file handles concurrently than
the cache size set via max_open_files, it attempted to reduce the
number by evicting entries from the table cache. This could
happen most easily during compaction, and if max_open_files was
low. Because the handles were in use, their reference count did
not drop to zero, and so the usage sum in the cache was not
modified by the evictions. Subsequent Insert() calls returned
valid handles, but their entries were immediately evicted from
the cache, which though empty still acted as though full. As a
result, there was effectively no caching, and the number of open
file handles rose []ly until it hit system-imposed limits and
the process died.
If one set max_open_files lower, the cache was more likely to
exhibit this beahviour, and cause the process to run out of file
descriptors. That is, max_open_files acted in almost exactly the
opposite manner from what was intended.
The problems:
1. The cache kept all elements on its LRU list eligible for capacity
eviction---even those with outstanding references from clients. This was
ineffective in reducing resource consumption because there was an
outstanding reference, guaranteeing that the items remained. A secondary
issue was that there is no guarantee that these in-use items will be the
last things reached in the LRU chain, which actually recorded
"least-recently requested" rather than "least-recently used".
2. The sum of usages was decremented not when a (key,value) was evicted from
the cache, but when its reference count went to zero. Thus, when things
were removed from the cache, either by garbage collection or via Erase(),
the usage sum was not necessarily decreased. This allowed the cache to act
as though full when it was in fact not, reducing caching effectiveness, and
leading to more resources being consumed---the opposite of what the
evictions were intended to achieve.
3. (minor) The cache's clients insert items into it by first looking up the
key, and inserting only if no value is found. Although the cache has an
internal lock, the clients use no locking to ensure atomicity of the
Lookup/Insert pair. (see table/table.cc: block_cache->Insert() and
db/table_cache.cc: cache_->Insert()). Thus, if two threads Insert() at
about the same time, they can both Lookup(), find nothing, and both
Insert(). The second Insert() would evict the first value, leaving each
thread with a handle on its own version of the data, and with the second
version in the cache. It would be better if both threads ended up with a
handle on the same (key,value) pair, which implies it must be the first item
inserted. This suggests that Insert() should not replace an existing value.
This can be made safe with current usage inside LeveDB itself, but this is
not easy to change first because Cache is a public interface, so to change
the semantics of an existing call might break things, second because Cache
is an abstract virtual class, so adding a new abstract virtual method may
break other implementations, and third, the new method "insert without
replacing" cannot be implemented in terms of the existing methods, so cannot
be implemented with a non-abstract default. But fortunately, the effects
of this issue are minor, so this issue is not fixed by this change.
The changes:
The assumption in the fixes is that it is always better to cache
entries unless removal from the cache would lead to deallocation.
Cache entries now have an "in_cache" boolean indicating whether
the cache has a reference on the entry. The only ways that this can
become false without the entry being passed to its "deleter" are via
Erase(), via Insert() when an element with a duplicate key is inserted,
or on destruction of the cache.
The cache now keeps two linked lists instead of one. All items
in the cache are in one list or the other, and never both. Items
still referenced by clients but erased from the cache are in
neither list. The lists are:
- in-use: contains the items currently referenced by clients, in no particular
order. (This list is used for invariant checking. If we removed the check,
elements that would otherwise be on this list could be left as disconnected
singleton lists.)
- LRU: contains the items not currently referenced by clients, in LRU order
A new internal Ref() method increments the reference count. If
incrementing from 1 to 2 for an item in the cache, it is moved
from the LRU list to the in-use list.
The Unref() call now moves things from the in-use list to the LRU
list if the reference count falls to 1, and the item is in the
cache. It no longer adjusts the usage sum. The usage sum now
reflects only what is in the cache, rather than including
still-referenced items that have been evicted.
The LRU_Append() now takes a "list" parameter so that it can be
used to append either to the LRU list or the in-use list.
Lookup() is modified to use the new Ref() call, rather than
adjusting the reference count and LRU chain directly.
Insert() eviction code is also modified to adjust the usage sum and the
in_cache boolean of the evicted elements. Some LevelDB tests assume that there
will be no caching whatsoever if the cache size is set to zero, so this is
handled as a special case.
A new private method FinishErase() is factored out
with the common code from where items are removed from the cache.
Erase() is modified to adjust the usage sum and the in_cache
boolean of the erased elements, and to use FinishErase().
Prune() is modified to use FinishErase() also, and to make use of the fact that
the lru_ list now contains only items with reference count 1.
- EvictionPolicy is modified to test that an entry with an
outstanding handle is not evicted. This test fails with the old cache.cc.
- A new test case UseExceedsCacheSize verifies that even when the
cache is overfull of entries with outstanding handles, none are
evicted. This test fails with the old cache.cc, and is the key
issue that causes file descriptors to run out when the cache
size is set too small.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=123247237
8年前 fix problems in LevelDB's caching code
Background:
LevelDB uses a cache (util/cache.h, util/cache.cc) of (key,value)
pairs for two purposes:
- a cache of (table, file handle) pairs
- a cache of blocks
The cache places the (key,value) pairs in a reference-counted
wrapper. When it returns a value, it returns a reference to this
wrapper. When the client has finished using the reference and
its enclosed (key,value), it calls Release() to decrement the
reference count.
Each (key,value) pair has an associated resource usage. The
cache maintains the sum of the usages of the elements it holds,
and removes values as needed to keep the sum below a capacity
threshold. It maintains an LRU list so that it will remove the
least-recently used elements first.
The max_open_files option to LevelDB sets the size of the cache
of (table, file handle) pairs. The option is not used in any
other way.
The observed behaviour:
If LevelDB at any time used more file handles concurrently than
the cache size set via max_open_files, it attempted to reduce the
number by evicting entries from the table cache. This could
happen most easily during compaction, and if max_open_files was
low. Because the handles were in use, their reference count did
not drop to zero, and so the usage sum in the cache was not
modified by the evictions. Subsequent Insert() calls returned
valid handles, but their entries were immediately evicted from
the cache, which though empty still acted as though full. As a
result, there was effectively no caching, and the number of open
file handles rose []ly until it hit system-imposed limits and
the process died.
If one set max_open_files lower, the cache was more likely to
exhibit this beahviour, and cause the process to run out of file
descriptors. That is, max_open_files acted in almost exactly the
opposite manner from what was intended.
The problems:
1. The cache kept all elements on its LRU list eligible for capacity
eviction---even those with outstanding references from clients. This was
ineffective in reducing resource consumption because there was an
outstanding reference, guaranteeing that the items remained. A secondary
issue was that there is no guarantee that these in-use items will be the
last things reached in the LRU chain, which actually recorded
"least-recently requested" rather than "least-recently used".
2. The sum of usages was decremented not when a (key,value) was evicted from
the cache, but when its reference count went to zero. Thus, when things
were removed from the cache, either by garbage collection or via Erase(),
the usage sum was not necessarily decreased. This allowed the cache to act
as though full when it was in fact not, reducing caching effectiveness, and
leading to more resources being consumed---the opposite of what the
evictions were intended to achieve.
3. (minor) The cache's clients insert items into it by first looking up the
key, and inserting only if no value is found. Although the cache has an
internal lock, the clients use no locking to ensure atomicity of the
Lookup/Insert pair. (see table/table.cc: block_cache->Insert() and
db/table_cache.cc: cache_->Insert()). Thus, if two threads Insert() at
about the same time, they can both Lookup(), find nothing, and both
Insert(). The second Insert() would evict the first value, leaving each
thread with a handle on its own version of the data, and with the second
version in the cache. It would be better if both threads ended up with a
handle on the same (key,value) pair, which implies it must be the first item
inserted. This suggests that Insert() should not replace an existing value.
This can be made safe with current usage inside LeveDB itself, but this is
not easy to change first because Cache is a public interface, so to change
the semantics of an existing call might break things, second because Cache
is an abstract virtual class, so adding a new abstract virtual method may
break other implementations, and third, the new method "insert without
replacing" cannot be implemented in terms of the existing methods, so cannot
be implemented with a non-abstract default. But fortunately, the effects
of this issue are minor, so this issue is not fixed by this change.
The changes:
The assumption in the fixes is that it is always better to cache
entries unless removal from the cache would lead to deallocation.
Cache entries now have an "in_cache" boolean indicating whether
the cache has a reference on the entry. The only ways that this can
become false without the entry being passed to its "deleter" are via
Erase(), via Insert() when an element with a duplicate key is inserted,
or on destruction of the cache.
The cache now keeps two linked lists instead of one. All items
in the cache are in one list or the other, and never both. Items
still referenced by clients but erased from the cache are in
neither list. The lists are:
- in-use: contains the items currently referenced by clients, in no particular
order. (This list is used for invariant checking. If we removed the check,
elements that would otherwise be on this list could be left as disconnected
singleton lists.)
- LRU: contains the items not currently referenced by clients, in LRU order
A new internal Ref() method increments the reference count. If
incrementing from 1 to 2 for an item in the cache, it is moved
from the LRU list to the in-use list.
The Unref() call now moves things from the in-use list to the LRU
list if the reference count falls to 1, and the item is in the
cache. It no longer adjusts the usage sum. The usage sum now
reflects only what is in the cache, rather than including
still-referenced items that have been evicted.
The LRU_Append() now takes a "list" parameter so that it can be
used to append either to the LRU list or the in-use list.
Lookup() is modified to use the new Ref() call, rather than
adjusting the reference count and LRU chain directly.
Insert() eviction code is also modified to adjust the usage sum and the
in_cache boolean of the evicted elements. Some LevelDB tests assume that there
will be no caching whatsoever if the cache size is set to zero, so this is
handled as a special case.
A new private method FinishErase() is factored out
with the common code from where items are removed from the cache.
Erase() is modified to adjust the usage sum and the in_cache
boolean of the erased elements, and to use FinishErase().
Prune() is modified to use FinishErase() also, and to make use of the fact that
the lru_ list now contains only items with reference count 1.
- EvictionPolicy is modified to test that an entry with an
outstanding handle is not evicted. This test fails with the old cache.cc.
- A new test case UseExceedsCacheSize verifies that even when the
cache is overfull of entries with outstanding handles, none are
evicted. This test fails with the old cache.cc, and is the key
issue that causes file descriptors to run out when the cache
size is set too small.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=123247237
8年前 fix problems in LevelDB's caching code
Background:
LevelDB uses a cache (util/cache.h, util/cache.cc) of (key,value)
pairs for two purposes:
- a cache of (table, file handle) pairs
- a cache of blocks
The cache places the (key,value) pairs in a reference-counted
wrapper. When it returns a value, it returns a reference to this
wrapper. When the client has finished using the reference and
its enclosed (key,value), it calls Release() to decrement the
reference count.
Each (key,value) pair has an associated resource usage. The
cache maintains the sum of the usages of the elements it holds,
and removes values as needed to keep the sum below a capacity
threshold. It maintains an LRU list so that it will remove the
least-recently used elements first.
The max_open_files option to LevelDB sets the size of the cache
of (table, file handle) pairs. The option is not used in any
other way.
The observed behaviour:
If LevelDB at any time used more file handles concurrently than
the cache size set via max_open_files, it attempted to reduce the
number by evicting entries from the table cache. This could
happen most easily during compaction, and if max_open_files was
low. Because the handles were in use, their reference count did
not drop to zero, and so the usage sum in the cache was not
modified by the evictions. Subsequent Insert() calls returned
valid handles, but their entries were immediately evicted from
the cache, which though empty still acted as though full. As a
result, there was effectively no caching, and the number of open
file handles rose []ly until it hit system-imposed limits and
the process died.
If one set max_open_files lower, the cache was more likely to
exhibit this beahviour, and cause the process to run out of file
descriptors. That is, max_open_files acted in almost exactly the
opposite manner from what was intended.
The problems:
1. The cache kept all elements on its LRU list eligible for capacity
eviction---even those with outstanding references from clients. This was
ineffective in reducing resource consumption because there was an
outstanding reference, guaranteeing that the items remained. A secondary
issue was that there is no guarantee that these in-use items will be the
last things reached in the LRU chain, which actually recorded
"least-recently requested" rather than "least-recently used".
2. The sum of usages was decremented not when a (key,value) was evicted from
the cache, but when its reference count went to zero. Thus, when things
were removed from the cache, either by garbage collection or via Erase(),
the usage sum was not necessarily decreased. This allowed the cache to act
as though full when it was in fact not, reducing caching effectiveness, and
leading to more resources being consumed---the opposite of what the
evictions were intended to achieve.
3. (minor) The cache's clients insert items into it by first looking up the
key, and inserting only if no value is found. Although the cache has an
internal lock, the clients use no locking to ensure atomicity of the
Lookup/Insert pair. (see table/table.cc: block_cache->Insert() and
db/table_cache.cc: cache_->Insert()). Thus, if two threads Insert() at
about the same time, they can both Lookup(), find nothing, and both
Insert(). The second Insert() would evict the first value, leaving each
thread with a handle on its own version of the data, and with the second
version in the cache. It would be better if both threads ended up with a
handle on the same (key,value) pair, which implies it must be the first item
inserted. This suggests that Insert() should not replace an existing value.
This can be made safe with current usage inside LeveDB itself, but this is
not easy to change first because Cache is a public interface, so to change
the semantics of an existing call might break things, second because Cache
is an abstract virtual class, so adding a new abstract virtual method may
break other implementations, and third, the new method "insert without
replacing" cannot be implemented in terms of the existing methods, so cannot
be implemented with a non-abstract default. But fortunately, the effects
of this issue are minor, so this issue is not fixed by this change.
The changes:
The assumption in the fixes is that it is always better to cache
entries unless removal from the cache would lead to deallocation.
Cache entries now have an "in_cache" boolean indicating whether
the cache has a reference on the entry. The only ways that this can
become false without the entry being passed to its "deleter" are via
Erase(), via Insert() when an element with a duplicate key is inserted,
or on destruction of the cache.
The cache now keeps two linked lists instead of one. All items
in the cache are in one list or the other, and never both. Items
still referenced by clients but erased from the cache are in
neither list. The lists are:
- in-use: contains the items currently referenced by clients, in no particular
order. (This list is used for invariant checking. If we removed the check,
elements that would otherwise be on this list could be left as disconnected
singleton lists.)
- LRU: contains the items not currently referenced by clients, in LRU order
A new internal Ref() method increments the reference count. If
incrementing from 1 to 2 for an item in the cache, it is moved
from the LRU list to the in-use list.
The Unref() call now moves things from the in-use list to the LRU
list if the reference count falls to 1, and the item is in the
cache. It no longer adjusts the usage sum. The usage sum now
reflects only what is in the cache, rather than including
still-referenced items that have been evicted.
The LRU_Append() now takes a "list" parameter so that it can be
used to append either to the LRU list or the in-use list.
Lookup() is modified to use the new Ref() call, rather than
adjusting the reference count and LRU chain directly.
Insert() eviction code is also modified to adjust the usage sum and the
in_cache boolean of the evicted elements. Some LevelDB tests assume that there
will be no caching whatsoever if the cache size is set to zero, so this is
handled as a special case.
A new private method FinishErase() is factored out
with the common code from where items are removed from the cache.
Erase() is modified to adjust the usage sum and the in_cache
boolean of the erased elements, and to use FinishErase().
Prune() is modified to use FinishErase() also, and to make use of the fact that
the lru_ list now contains only items with reference count 1.
- EvictionPolicy is modified to test that an entry with an
outstanding handle is not evicted. This test fails with the old cache.cc.
- A new test case UseExceedsCacheSize verifies that even when the
cache is overfull of entries with outstanding handles, none are
evicted. This test fails with the old cache.cc, and is the key
issue that causes file descriptors to run out when the cache
size is set too small.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=123247237
8年前 |
|
- // Copyright (c) 2011 The LevelDB Authors. All rights reserved.
- // Use of this source code is governed by a BSD-style license that can be
- // found in the LICENSE file. See the AUTHORS file for names of contributors.
-
- #include <assert.h>
- #include <stdio.h>
- #include <stdlib.h>
-
- #include "leveldb/cache.h"
- #include "port/port.h"
- #include "util/hash.h"
- #include "util/mutexlock.h"
-
- namespace leveldb {
-
- Cache::~Cache() {
- }
-
- namespace {
-
- // LRU cache implementation
- //
- // Cache entries have an "in_cache" boolean indicating whether the cache has a
- // reference on the entry. The only ways that this can become false without the
- // entry being passed to its "deleter" are via Erase(), via Insert() when
- // an element with a duplicate key is inserted, or on destruction of the cache.
- //
- // The cache keeps two linked lists of items in the cache. All items in the
- // cache are in one list or the other, and never both. Items still referenced
- // by clients but erased from the cache are in neither list. The lists are:
- // - in-use: contains the items currently referenced by clients, in no
- // particular order. (This list is used for invariant checking. If we
- // removed the check, elements that would otherwise be on this list could be
- // left as disconnected singleton lists.)
- // - LRU: contains the items not currently referenced by clients, in LRU order
- // Elements are moved between these lists by the Ref() and Unref() methods,
- // when they detect an element in the cache acquiring or losing its only
- // external reference.
-
- // An entry is a variable length heap-allocated structure. Entries
- // are kept in a circular doubly linked list ordered by access time.
- struct LRUHandle {
- void* value;
- void (*deleter)(const Slice&, void* value);
- LRUHandle* next_hash;
- LRUHandle* next;
- LRUHandle* prev;
- size_t charge; // TODO(opt): Only allow uint32_t?
- size_t key_length;
- bool in_cache; // Whether entry is in the cache.
- uint32_t refs; // References, including cache reference, if present.
- uint32_t hash; // Hash of key(); used for fast sharding and comparisons
- char key_data[1]; // Beginning of key
-
- Slice key() const {
- // next_ is only equal to this if the LRU handle is the list head of an
- // empty list. List heads never have meaningful keys.
- assert(next != this);
-
- return Slice(key_data, key_length);
- }
- };
-
- // We provide our own simple hash table since it removes a whole bunch
- // of porting hacks and is also faster than some of the built-in hash
- // table implementations in some of the compiler/runtime combinations
- // we have tested. E.g., readrandom speeds up by ~5% over the g++
- // 4.4.3's builtin hashtable.
- class HandleTable {
- public:
- HandleTable() : length_(0), elems_(0), list_(NULL) { Resize(); }
- ~HandleTable() { delete[] list_; }
-
- LRUHandle* Lookup(const Slice& key, uint32_t hash) {
- return *FindPointer(key, hash);
- }
-
- LRUHandle* Insert(LRUHandle* h) {
- LRUHandle** ptr = FindPointer(h->key(), h->hash);
- LRUHandle* old = *ptr;
- h->next_hash = (old == NULL ? NULL : old->next_hash);
- *ptr = h;
- if (old == NULL) {
- ++elems_;
- if (elems_ > length_) {
- // Since each cache entry is fairly large, we aim for a small
- // average linked list length (<= 1).
- Resize();
- }
- }
- return old;
- }
-
- LRUHandle* Remove(const Slice& key, uint32_t hash) {
- LRUHandle** ptr = FindPointer(key, hash);
- LRUHandle* result = *ptr;
- if (result != NULL) {
- *ptr = result->next_hash;
- --elems_;
- }
- return result;
- }
-
- private:
- // The table consists of an array of buckets where each bucket is
- // a linked list of cache entries that hash into the bucket.
- uint32_t length_;
- uint32_t elems_;
- LRUHandle** list_;
-
- // Return a pointer to slot that points to a cache entry that
- // matches key/hash. If there is no such cache entry, return a
- // pointer to the trailing slot in the corresponding linked list.
- LRUHandle** FindPointer(const Slice& key, uint32_t hash) {
- LRUHandle** ptr = &list_[hash & (length_ - 1)];
- while (*ptr != NULL &&
- ((*ptr)->hash != hash || key != (*ptr)->key())) {
- ptr = &(*ptr)->next_hash;
- }
- return ptr;
- }
-
- void Resize() {
- uint32_t new_length = 4;
- while (new_length < elems_) {
- new_length *= 2;
- }
- LRUHandle** new_list = new LRUHandle*[new_length];
- memset(new_list, 0, sizeof(new_list[0]) * new_length);
- uint32_t count = 0;
- for (uint32_t i = 0; i < length_; i++) {
- LRUHandle* h = list_[i];
- while (h != NULL) {
- LRUHandle* next = h->next_hash;
- uint32_t hash = h->hash;
- LRUHandle** ptr = &new_list[hash & (new_length - 1)];
- h->next_hash = *ptr;
- *ptr = h;
- h = next;
- count++;
- }
- }
- assert(elems_ == count);
- delete[] list_;
- list_ = new_list;
- length_ = new_length;
- }
- };
-
- // A single shard of sharded cache.
- class LRUCache {
- public:
- LRUCache();
- ~LRUCache();
-
- // Separate from constructor so caller can easily make an array of LRUCache
- void SetCapacity(size_t capacity) { capacity_ = capacity; }
-
- // Like Cache methods, but with an extra "hash" parameter.
- Cache::Handle* Insert(const Slice& key, uint32_t hash,
- void* value, size_t charge,
- void (*deleter)(const Slice& key, void* value));
- Cache::Handle* Lookup(const Slice& key, uint32_t hash);
- void Release(Cache::Handle* handle);
- void Erase(const Slice& key, uint32_t hash);
- void Prune();
- size_t TotalCharge() const {
- MutexLock l(&mutex_);
- return usage_;
- }
-
- private:
- void LRU_Remove(LRUHandle* e);
- void LRU_Append(LRUHandle*list, LRUHandle* e);
- void Ref(LRUHandle* e);
- void Unref(LRUHandle* e);
- bool FinishErase(LRUHandle* e);
-
- // Initialized before use.
- size_t capacity_;
-
- // mutex_ protects the following state.
- mutable port::Mutex mutex_;
- size_t usage_;
-
- // Dummy head of LRU list.
- // lru.prev is newest entry, lru.next is oldest entry.
- // Entries have refs==1 and in_cache==true.
- LRUHandle lru_;
-
- // Dummy head of in-use list.
- // Entries are in use by clients, and have refs >= 2 and in_cache==true.
- LRUHandle in_use_;
-
- HandleTable table_;
- };
-
- LRUCache::LRUCache()
- : usage_(0) {
- // Make empty circular linked lists.
- lru_.next = &lru_;
- lru_.prev = &lru_;
- in_use_.next = &in_use_;
- in_use_.prev = &in_use_;
- }
-
- LRUCache::~LRUCache() {
- assert(in_use_.next == &in_use_); // Error if caller has an unreleased handle
- for (LRUHandle* e = lru_.next; e != &lru_; ) {
- LRUHandle* next = e->next;
- assert(e->in_cache);
- e->in_cache = false;
- assert(e->refs == 1); // Invariant of lru_ list.
- Unref(e);
- e = next;
- }
- }
-
- void LRUCache::Ref(LRUHandle* e) {
- if (e->refs == 1 && e->in_cache) { // If on lru_ list, move to in_use_ list.
- LRU_Remove(e);
- LRU_Append(&in_use_, e);
- }
- e->refs++;
- }
-
- void LRUCache::Unref(LRUHandle* e) {
- assert(e->refs > 0);
- e->refs--;
- if (e->refs == 0) { // Deallocate.
- assert(!e->in_cache);
- (*e->deleter)(e->key(), e->value);
- free(e);
- } else if (e->in_cache && e->refs == 1) { // No longer in use; move to lru_ list.
- LRU_Remove(e);
- LRU_Append(&lru_, e);
- }
- }
-
- void LRUCache::LRU_Remove(LRUHandle* e) {
- e->next->prev = e->prev;
- e->prev->next = e->next;
- }
-
- void LRUCache::LRU_Append(LRUHandle* list, LRUHandle* e) {
- // Make "e" newest entry by inserting just before *list
- e->next = list;
- e->prev = list->prev;
- e->prev->next = e;
- e->next->prev = e;
- }
-
- Cache::Handle* LRUCache::Lookup(const Slice& key, uint32_t hash) {
- MutexLock l(&mutex_);
- LRUHandle* e = table_.Lookup(key, hash);
- if (e != NULL) {
- Ref(e);
- }
- return reinterpret_cast<Cache::Handle*>(e);
- }
-
- void LRUCache::Release(Cache::Handle* handle) {
- MutexLock l(&mutex_);
- Unref(reinterpret_cast<LRUHandle*>(handle));
- }
-
- Cache::Handle* LRUCache::Insert(
- const Slice& key, uint32_t hash, void* value, size_t charge,
- void (*deleter)(const Slice& key, void* value)) {
- MutexLock l(&mutex_);
-
- LRUHandle* e = reinterpret_cast<LRUHandle*>(
- malloc(sizeof(LRUHandle)-1 + key.size()));
- e->value = value;
- e->deleter = deleter;
- e->charge = charge;
- e->key_length = key.size();
- e->hash = hash;
- e->in_cache = false;
- e->refs = 1; // for the returned handle.
- memcpy(e->key_data, key.data(), key.size());
-
- if (capacity_ > 0) {
- e->refs++; // for the cache's reference.
- e->in_cache = true;
- LRU_Append(&in_use_, e);
- usage_ += charge;
- FinishErase(table_.Insert(e));
- } else { // don't cache. (capacity_==0 is supported and turns off caching.)
- // next is read by key() in an assert, so it must be initialized
- e->next = NULL;
- }
- while (usage_ > capacity_ && lru_.next != &lru_) {
- LRUHandle* old = lru_.next;
- assert(old->refs == 1);
- bool erased = FinishErase(table_.Remove(old->key(), old->hash));
- if (!erased) { // to avoid unused variable when compiled NDEBUG
- assert(erased);
- }
- }
-
- return reinterpret_cast<Cache::Handle*>(e);
- }
-
- // If e != NULL, finish removing *e from the cache; it has already been removed
- // from the hash table. Return whether e != NULL. Requires mutex_ held.
- bool LRUCache::FinishErase(LRUHandle* e) {
- if (e != NULL) {
- assert(e->in_cache);
- LRU_Remove(e);
- e->in_cache = false;
- usage_ -= e->charge;
- Unref(e);
- }
- return e != NULL;
- }
-
- void LRUCache::Erase(const Slice& key, uint32_t hash) {
- MutexLock l(&mutex_);
- FinishErase(table_.Remove(key, hash));
- }
-
- void LRUCache::Prune() {
- MutexLock l(&mutex_);
- while (lru_.next != &lru_) {
- LRUHandle* e = lru_.next;
- assert(e->refs == 1);
- bool erased = FinishErase(table_.Remove(e->key(), e->hash));
- if (!erased) { // to avoid unused variable when compiled NDEBUG
- assert(erased);
- }
- }
- }
-
- static const int kNumShardBits = 4;
- static const int kNumShards = 1 << kNumShardBits;
-
- class ShardedLRUCache : public Cache {
- private:
- LRUCache shard_[kNumShards];
- port::Mutex id_mutex_;
- uint64_t last_id_;
-
- static inline uint32_t HashSlice(const Slice& s) {
- return Hash(s.data(), s.size(), 0);
- }
-
- static uint32_t Shard(uint32_t hash) {
- return hash >> (32 - kNumShardBits);
- }
-
- public:
- explicit ShardedLRUCache(size_t capacity)
- : last_id_(0) {
- const size_t per_shard = (capacity + (kNumShards - 1)) / kNumShards;
- for (int s = 0; s < kNumShards; s++) {
- shard_[s].SetCapacity(per_shard);
- }
- }
- virtual ~ShardedLRUCache() { }
- virtual Handle* Insert(const Slice& key, void* value, size_t charge,
- void (*deleter)(const Slice& key, void* value)) {
- const uint32_t hash = HashSlice(key);
- return shard_[Shard(hash)].Insert(key, hash, value, charge, deleter);
- }
- virtual Handle* Lookup(const Slice& key) {
- const uint32_t hash = HashSlice(key);
- return shard_[Shard(hash)].Lookup(key, hash);
- }
- virtual void Release(Handle* handle) {
- LRUHandle* h = reinterpret_cast<LRUHandle*>(handle);
- shard_[Shard(h->hash)].Release(handle);
- }
- virtual void Erase(const Slice& key) {
- const uint32_t hash = HashSlice(key);
- shard_[Shard(hash)].Erase(key, hash);
- }
- virtual void* Value(Handle* handle) {
- return reinterpret_cast<LRUHandle*>(handle)->value;
- }
- virtual uint64_t NewId() {
- MutexLock l(&id_mutex_);
- return ++(last_id_);
- }
- virtual void Prune() {
- for (int s = 0; s < kNumShards; s++) {
- shard_[s].Prune();
- }
- }
- virtual size_t TotalCharge() const {
- size_t total = 0;
- for (int s = 0; s < kNumShards; s++) {
- total += shard_[s].TotalCharge();
- }
- return total;
- }
- };
-
- } // end anonymous namespace
-
- Cache* NewLRUCache(size_t capacity) {
- return new ShardedLRUCache(capacity);
- }
-
- } // namespace leveldb
|