- switched from mmap based writing to simpler stdio based writing. Has a
minor impact (0.5 microseconds) on microbenchmarks for asynchronous
writes. Synchronous writes speed up from 30ms to 10ms on linux/ext4.
Should be much more reliable on diverse platforms.
- compaction errors now immediately put the database into a read-only
mode (until it is re-opened). As a downside, a disk going out of
space and then space being created will require a re-open to recover
from, whereas previously that would happen automatically. On the
plus side, many corruption possibilities go away.
- force the DB to enter an error-state so that all future writes fail
when a synchronous log write succeeds but the sync fails.
- repair now regenerates sstables that exhibit problems
- fix issue 218 - Use native memory barriers on OSX
- fix issue 212 - QNX build is broken
- fix build on iOS with xcode 5
- make tests compile and pass on windows
Highlights
----------
Mmap at most 1000 files on Posix to improve performance for large databases.
Support for more architectures (thanks to Alexander K.)
Building and porting
--------------------
HP/UX support (issue 126)
AtomicPointer for ia64 (issue 123)
Sparc v9 support (issue 124)
Atomic ops for powerpc
Use -fno-builtin-memcmp only when using g++
Simplify IOS build rules (issue 114)
Use CXXFLAGS instead of CFLAGS when invoking C++ compiler (issue 118)
Fix snappy shared library problem (issue 94)
Fix shared library installation path regression
Endian-ness detection tweak for FreeBSD
Bug fixes
---------
Stop ignoring FLAGS_open_files in db_bench
Make bloom test behavior agnostic to endian-ness
Performance
-----------
Limit number of mmapped files to 1000 to improve perf for large dbs
Do not delay for 1 second on shutdown path (issue 125)
Misc
----
Make InMemoryEnv return a no-op logger
C binding now has a wrapper for free (issue 117)
Add thread-safety annotations
Added an in-process lock table (issue 120)
Make RandomAccessFile and SequentialFile non-copyable
various platforms; improve android port speed.
Avoid static initializer by using a new portability interface for
thread-safe lazy initialization. Custom ports will need to be
extended to implement InitOnce/OnceType/LEVELDB_ONCE_INIT.
Fix endian-ness detection (fixes Powerpc builds).
Build related fixes:
- Support platforms that have unversioned shared libraries.
- Fix IOS build rules.
Android improvements
- Speed up atomic pointers
- Share more code with port_posix.
Do not spin in a tight loop attempting compactions if the file system
is inaccessible (e.g., if kerberos tickets have expired or if it is out
of space).
In particular, we add a new FilterPolicy class. An instance
of this class can be supplied in Options when opening a
database. If supplied, the instance is used to generate
summaries of keys (e.g., a bloom filter) which are placed in
sstables. These summaries are consulted by DB::Get() so we
can avoid reading sstable blocks that are guaranteed to not
contain the key we are looking for.
This change provides one implementation of FilterPolicy
based on bloom filters.
Other changes:
- Updated version number to 1.4.
- Some build tweaks.
- C binding for CompactRange.
- A few more benchmarks: deleteseq, deleterandom, readmissing, seekrandom.
- Minor .gitignore update.
- Replace raw slice comparison with a call to user comparator.
Added test for custom comparators.
- Fix end of namespace comments.
- Fixed bug in picking inputs for a level-0 compaction.
When finding overlapping files, the covered range may expand
as files are added to the input set. We now correctly expand
the range when this happens instead of continuing to use the
old range. For example, suppose L0 contains files with the
following ranges:
F1: a .. d
F2: c .. g
F3: f .. j
and the initial compaction target is F3. We used to search
for range f..j which yielded {F2,F3}. However we now expand
the range as soon as another file is added. In this case,
when F2 is added, we expand the range to c..j and restart the
search. That picks up file F1 as well.
This change fixes a bug related to deleted keys showing up
incorrectly after a compaction as described in Issue 44.
(Sync with upstream @25072954)
- Added DB::CompactRange() method.
Changed manual compaction code so it breaks up compactions of
big ranges into smaller compactions.
Changed the code that pushes the output of memtable compactions
to higher levels to obey the grandparent constraint: i.e., we
must never have a single file in level L that overlaps too
much data in level L+1 (to avoid very expensive L-1 compactions).
Added code to pretty-print internal keys.
- Fixed bug where we would not detect overlap with files in
level-0 because we were incorrectly using binary search
on an array of files with overlapping ranges.
Added "leveldb.sstables" property that can be used to dump
all of the sstables and ranges that make up the db state.
- Removing post_write_snapshot support. Email to leveldb mailing
list brought up no users, just confusion from one person about
what it meant.
- Fixing static_cast char to unsigned on BIG_ENDIAN platforms.
Fixes Issue 35 and Issue 36.
- Comment clarification to address leveldb Issue 37.
- Change license in posix_logger.h to match other files.
- A build problem where uint32 was used instead of uint32_t.
Sync with upstream @24408625
- Fix bug in Get: when it triggers a compaction, it could sometimes
mark the compaction with the wrong level (if there was a gap
in the set of levels examined for the Get).
- Do not hold mutex while writing to the log file or to the
MANIFEST file.
Added a new benchmark that runs a writer thread concurrently with
reader threads.
Percentiles
------------------------------
micros/op: avg median 99 99.9 99.99 99.999 max
------------------------------------------------------
before: 42 38 110 225 32000 42000 48000
after: 24 20 55 65 130 1100 7000
- Fixed race in optimized Get. It should have been using the
pinned memtables, not the current memtables.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@50 62dab493-f737-651d-591e-8d6aee1b9529
- Fix for issue 33 (non-null-terminated result from
leveldb_property_value())
- Support for running multiple instances of a benchmark in parallel.
- Reduce lock contention on Get():
(1) Do not hold the lock while searching memtables.
(2) Shard block and table caches 16-ways.
Benchmark for evaluating this change:
$ db_bench --benchmarks=fillseq1,readrandom --threads=$n
(fillseq1 is a small hack to make sure fillseq runs once regardless
of number of threads specified on the command line).
git-svn-id: https://leveldb.googlecode.com/svn/trunk@49 62dab493-f737-651d-591e-8d6aee1b9529
- Removed one copy of an uncompressed block contents changing
the signature of Snappy_Uncompress() so it uncompresses into a
flat array instead of a std::string.
Speeds up readrandom ~10%.
- Instead of a combination of Env/WritableFile, we now have a
Logger interface that can be easily overridden applications
that want to supply their own logging.
- Separated out the gcc and Sun Studio parts of atomic_pointer.h
so we can use 'asm', 'volatile' keywords for Sun Studio.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@39 62dab493-f737-651d-591e-8d6aee1b9529
- Implemented Get() directly instead of building on top of a full
merging iterator stack. This speeds up the "readrandom" benchmark
by up to 15-30%.
- Fixed an opensource compilation problem.
Added --db=<name> flag to control where the database is placed.
- Automatically compact a file when we have done enough
overlapping seeks to that file.
- Fixed a performance bug where we would read from at least one
file in a level even if none of the files overlapped the key
being read.
- Makefile fix for Mac OSX installations that have XCode 4 without XCode 3.
- Unified the two occurrences of binary search in a file-list
into one routine.
- Found and fixed a bug where we would unnecessarily search the
last file when looking for a key larger than all data in the
level.
- A fix to avoid the need for trivial move compactions and
therefore gets rid of two out of five syncs in "fillseq".
- Removed the MANIFEST file write when switching to a new
memtable/log-file for a 10-20% improvement on fill speed on ext4.
- Adding a SNAPPY setting in the Makefile for folks who have
Snappy installed. Snappy compresses values and speeds up writes.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@32 62dab493-f737-651d-591e-8d6aee1b9529
* Patch LevelDB to build for OSX and iOS
* Fix race condition in memtable iterator deletion.
* Other small fixes.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@29 62dab493-f737-651d-591e-8d6aee1b9529
* env_chromium.cc should not export symbols.
* Fix MSVC warnings.
* Removed large value support.
* Fix broken reference to documentation file
git-svn-id: https://leveldb.googlecode.com/svn/trunk@24 62dab493-f737-651d-591e-8d6aee1b9529
David Grogan
Sanjay Ghemawat
Hans Wennborg
Gabor Cselle
gabor@google.com
dgrogan@chromium.org
jorlow@chromium.org