Waits for a current transaction to finish in TEST_CompactRange when the
`background_work_finished_signal_` signal may be emitted due to an error. This is a prospective fix for flaky crashes observed in b/351680196#comment5.
PiperOrigin-RevId: 663457574
The "DeleteFile" method name causes pain for Windows developers, because
<windows.h> #defines a DeleteFile macro to DeleteFileW or DeleteFileA.
Current code uses workarounds, like #undefining DeleteFile everywhere an
Env is declared, implemented, or used.
This CL removes the need for workarounds by renaming Env::DeleteFile to
Env::RemoveFile. For consistency, Env::DeleteDir is also renamed to
Env::RemoveDir. A few internal methods are also renamed for consistency.
Software that supports Windows is expected to migrate any Env
implementations and usage to Remove{File,Dir}, and never use the name
Env::Delete{File,Dir} in its code.
The renaming is done in a backwards-compatible way, at the risk of
making it slightly more difficult to build a new correct Env
implementation. The backwards compatibility is achieved using the
following hacks:
1) Env::Remove{File,Dir} methods are added, with a default
implementation that calls into Env::Delete{File,Dir}. This makes old
Env implementations compatible with code that calls into the updated
API.
2) The Env::Delete{File,Dir} methods are no longer pure virtuals.
Instead, they gain a default implementation that calls into
Env::Remove{File,Dir}. This makes updated Env implementations
compatible with code that calls into the old API.
The cost of this approach is that it's possible to write an Env without
overriding either Rename{File,Dir} or Delete{File,Dir}, without getting
a compiler warning. However, attempting to run the test suite will
immediately fail with an infinite call stack ending in
{Remove,Delete}{File,Dir}, making developers aware of the problem.
PiperOrigin-RevId: 288710907
A recent change (4cb80b7ddc) to DBImpl::DeleteObsoleteFiles
unlocked DBImpl::mutex_ while deleting files to allow for
greater concurrency. This change improves on the prior in
a few areas:
1. The table is evicted from the table cache before unlocking
the mutex. This should only improve performance.
2. This implementation is slightly simpler, but at the cost of
a bit more memory usage.
3. A comment adding more detail as to why the mutex is being
unlocked and why it is safe to do so.
PiperOrigin-RevId: 253111645
mutex_ was already acquired before accessing DBImpl::versions_ in all
but one place: DBImpl::GetApproximateSizes. This change requires mutex_
to be held before accessing versions_.
PiperOrigin-RevId: 248390814
1) Convert iterator-based for loops to C++11 foreach loops.
2) Convert "void operator=" to "T& operator=".
3) Switch from copy operators from private to public deleted.
4) Switch from empty ctors / dtors to "= default" where appropriate.
PiperOrigin-RevId: 246679195
Use clang-format to correct formatting to be in agreement with the [Google C++ Style Guide](https://google.github.io/styleguide/cppguide.html). Doing this simplifies the process of accepting changes. Also fixed a few warnings flagged by clang-tidy.
PiperOrigin-RevId: 246350737
There were a few members which were identified to have been left
uninitialized in some constructors. These were very likely to
have been set before being used, otherwise the ASan tests would
have caught them, but still good practice to have them
initialized. This addresses some items reported in issue #668.
PiperOrigin-RevId: 243370145
This CL removes AtomicPointer from leveldb's port interface. Its usage is replaced with std::atomic<> from the C++11 standard library.
AtomicPointer was used to wrap flags, numbers, and pointers, so its instances are replaced with std::atomic<bool>, std::atomic<int>, std::atomic<size_t> and std::atomic<Node*>.
This CL does not revise the memory ordering. AtomicPointer's methods are replaced mechanically with their std::atomic equivalents, even when the underlying usage is incorrect. (Example: DBImpl::has_imm_ is written using release stores, even though it is always read using relaxed ordering.) Revising the memory ordering is left for future CLs.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=237865146
* Omit SnapshotImpl::list_ when assert() isn't on
* Make SnapshotImpl::number_ const and set it in the constructor
* Make SnapshotImpl::number_ private and access it via a getter
* Rename SnapshotImpl::number_ to SnapshotImpl::sequence_number_
* Rename SnapshotList::list_ to SnapshotList::head_
* Wrap casting from Snapshot* to SnapshotImpl* in ToSnapshotImpl()
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194852828
After this CL, all classes with Mutex members should be covered by annotations. Exceptions are atomic members, which shouldn't need locking, and DBImpl members that cause errors when annotated, which will be tackled separately.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190260865
This CL makes it easier to reason about thread safety by:
1) Adding Clang thread safety annotations according to comments.
2) Expanding a couple of variable names, without adding extra lines of code.
3) Adding const in a couple of places.
4) Replacing an always-non-null const pointer with a reference.
5) Fixing style warnings in the modified files.
This CL does not annotate the DBImpl members that claim to be protected
by the instance mutex, but are accessed without the mutex being held.
Those members (and their unprotected accesses) will be addressed in
future CLs.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=189354657
The approximate RAM usage of the database is calculated from the memory
allocated for write buffers and the block cache. This is to give an
estimate of memory usage to leveldb clients.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=104222307
(Based on a suggestion by cmumford.)
"open" benchmark on my workstation speeds up significantly since we
can now avoid three fdatasync calls and a compaction per open:
Before: ~80000 microseconds
After: ~130 microseconds
Details:
(1) Added Options::reuse_logs (currently defaults to false) to control
new behavior. The intention is to change the default to true after some
baking.
(2) Added Env::NewAppendableFile() whose default implementation returns
a not-supported error.
(3) VersionSet::Recovery attempts to reuse the MANIFEST from which
it is recovering.
(4) DBImpl recovery attempts to reuse the last log file and memtable.
(5) db_test.cc now tests a new configuration that sets reuse_logs to true.
(6) fault_injection_test also tests a reuse_logs==true config.
(7) Added a new recovery_test.
Changes are:
* Update version number to 1.18
* Replace the basic fprintf call with a call to fwrite in order to
work around the apparent compiler optimization/rewrite failure that we are
seeing with the new toolchain/iOS SDKs provided with Xcode6 and iOS8.
* Fix ALL the header guards.
* Createed a README.md with the LevelDB project description.
* A new CONTRIBUTING file.
* Don't implicitly convert uint64_t to size_t or int. Either preserve it as
uint64_t, or explicitly cast. This fixes MSVC warnings about possible value
truncation when compiling this code in Chromium.
* Added a DumpFile() library function that encapsulates the guts of the
"leveldbutil dump" command. This will allow clients to dump
data to their log files instead of stdout. It will also allow clients to
supply their own environment.
* leveldb: Remove unused function 'ConsumeChar'.
* leveldbutil: Remove unused member variables from WriteBatchItemPrinter.
* OpenBSD, NetBSD and DragonflyBSD have _LITTLE_ENDIAN, so define
PLATFORM_IS_LITTLE_ENDIAN like on FreeBSD. This fixes:
* issue #143
* issue #198
* issue #249
* Switch from <cstdatomic> to <atomic>. The former never made it into the
standard and doesn't exist in modern gcc versions at all. The later contains
everything that leveldb was using from the former.
This problem was noticed when porting to Portable Native Client where no memory
barrier is defined. The fact that <cstdatomic> is missing normally goes
unnoticed since memory barriers are defined for most architectures.
* Make Hash() treat its input as unsigned. Before this change LevelDB files
from platforms with different signedness of char were not compatible. This
change fixes: issue #243
* Verify checksums of index/meta/filter blocks when paranoid_checks set.
* Invoke all tools for iOS with xcrun. (This was causing problems with the new
XCode 5.1.1 image on pulse.)
* include <sys/stat.h> only once, and fix the following linter warning:
"Found C system header after C++ system header"
* When encountering a corrupted table file, return Status::Corruption instead of
Status::InvalidArgument.
* Support cygwin as build platform, patch is from https://code.google.com/p/leveldb/issues/detail?id=188
* Fix typo, merge patch from https://code.google.com/p/leveldb/issues/detail?id=159
* Fix typos and comments, and address the following two issues:
* issue #166
* issue #241
* Add missing db synchronize after "fillseq" in the benchmark.
* Removed unused variable in SeekRandom: value (issue #201)
- switched from mmap based writing to simpler stdio based writing. Has a
minor impact (0.5 microseconds) on microbenchmarks for asynchronous
writes. Synchronous writes speed up from 30ms to 10ms on linux/ext4.
Should be much more reliable on diverse platforms.
- compaction errors now immediately put the database into a read-only
mode (until it is re-opened). As a downside, a disk going out of
space and then space being created will require a re-open to recover
from, whereas previously that would happen automatically. On the
plus side, many corruption possibilities go away.
- force the DB to enter an error-state so that all future writes fail
when a synchronous log write succeeds but the sync fails.
- repair now regenerates sstables that exhibit problems
- fix issue 218 - Use native memory barriers on OSX
- fix issue 212 - QNX build is broken
- fix build on iOS with xcode 5
- make tests compile and pass on windows
Fix issues 77, 87, 182, 190.
Additionally, fix the bug described in
https://groups.google.com/d/msg/leveldb/yL6h1mAOc20/vLU64RylIdMJ
where a large contiguous keyspace of deleted data was not getting
compacted.
Also fix a bug where options.max_open_files was not getting clamped
properly.
Fixes issues
147 - thanks feniksgordonfreeman
153
156
166
Additionally,
* Remove calls to exit(1).
* Fix unused-variable warnings from clang.
* Fix possible overflow error related to num_restart value >= (2^32/4).
* Add leveldbutil to .gitignore.
* Add better log messages when Write is stalled on a compaction.
Highlights
----------
Mmap at most 1000 files on Posix to improve performance for large databases.
Support for more architectures (thanks to Alexander K.)
Building and porting
--------------------
HP/UX support (issue 126)
AtomicPointer for ia64 (issue 123)
Sparc v9 support (issue 124)
Atomic ops for powerpc
Use -fno-builtin-memcmp only when using g++
Simplify IOS build rules (issue 114)
Use CXXFLAGS instead of CFLAGS when invoking C++ compiler (issue 118)
Fix snappy shared library problem (issue 94)
Fix shared library installation path regression
Endian-ness detection tweak for FreeBSD
Bug fixes
---------
Stop ignoring FLAGS_open_files in db_bench
Make bloom test behavior agnostic to endian-ness
Performance
-----------
Limit number of mmapped files to 1000 to improve perf for large dbs
Do not delay for 1 second on shutdown path (issue 125)
Misc
----
Make InMemoryEnv return a no-op logger
C binding now has a wrapper for free (issue 117)
Add thread-safety annotations
Added an in-process lock table (issue 120)
Make RandomAccessFile and SequentialFile non-copyable
various platforms; improve android port speed.
Avoid static initializer by using a new portability interface for
thread-safe lazy initialization. Custom ports will need to be
extended to implement InitOnce/OnceType/LEVELDB_ONCE_INIT.
Fix endian-ness detection (fixes Powerpc builds).
Build related fixes:
- Support platforms that have unversioned shared libraries.
- Fix IOS build rules.
Android improvements
- Speed up atomic pointers
- Share more code with port_posix.
Do not spin in a tight loop attempting compactions if the file system
is inaccessible (e.g., if kerberos tickets have expired or if it is out
of space).
ArcueidType
leveldb Team
Sanjay Ghemawat
Victor Costan
Chris Mumford
corrado
ivanabc
ssid
ideawu
Chris Mumford
David Grogan