小组成员:10215300402-朱维清 & 10222140408 谷杰
Du kannst nicht mehr als 25 Themen auswählen Themen müssen entweder mit einem Buchstaben oder einer Ziffer beginnen. Sie können Bindestriche („-“) enthalten und bis zu 35 Zeichen lang sein.

280 Zeilen
8.4 KiB

Add support for Zstd-based compression in LevelDB. This change implements support for Zstd-based compression in LevelDB. Building up from the Snappy compression (which has been supported since inception), this change adds Zstd as an alternate compression algorithm. We are implementing this to provide alternative options for users who might have different performance and efficiency requirements. For instance, the Zstandard website (https://facebook.github.io/zstd/) claims that the Zstd algorithm can achieve around 30% higher compression ratios than Snappy, with relatively smaller (~10%) slowdowns in de/compression speeds. Benchmarking results: $ blaze-bin/third_party/leveldb/db_bench LevelDB: version 1.23 Date: Thu Feb 2 18:50:06 2023 CPU: 56 * Intel(R) Xeon(R) CPU E5-2690 v4 @ 2.60GHz CPUCache: 35840 KB Keys: 16 bytes each Values: 100 bytes each (50 bytes after compression) Entries: 1000000 RawSize: 110.6 MB (estimated) FileSize: 62.9 MB (estimated) ------------------------------------------------ fillseq : 2.613 micros/op; 42.3 MB/s fillsync : 3924.432 micros/op; 0.0 MB/s (1000 ops) fillrandom : 3.609 micros/op; 30.7 MB/s overwrite : 4.508 micros/op; 24.5 MB/s readrandom : 6.136 micros/op; (864322 of 1000000 found) readrandom : 5.446 micros/op; (864083 of 1000000 found) readseq : 0.180 micros/op; 613.3 MB/s readreverse : 0.321 micros/op; 344.7 MB/s compact : 827043.000 micros/op; readrandom : 4.603 micros/op; (864105 of 1000000 found) readseq : 0.169 micros/op; 656.3 MB/s readreverse : 0.315 micros/op; 350.8 MB/s fill100K : 854.009 micros/op; 111.7 MB/s (1000 ops) crc32c : 1.227 micros/op; 3184.0 MB/s (4K per op) snappycomp : 3.610 micros/op; 1081.9 MB/s (output: 55.2%) snappyuncomp : 0.691 micros/op; 5656.3 MB/s zstdcomp : 15.731 micros/op; 248.3 MB/s (output: 44.1%) zstduncomp : 4.218 micros/op; 926.2 MB/s PiperOrigin-RevId: 509957778
vor 1 Jahr
Add support for Zstd-based compression in LevelDB. This change implements support for Zstd-based compression in LevelDB. Building up from the Snappy compression (which has been supported since inception), this change adds Zstd as an alternate compression algorithm. We are implementing this to provide alternative options for users who might have different performance and efficiency requirements. For instance, the Zstandard website (https://facebook.github.io/zstd/) claims that the Zstd algorithm can achieve around 30% higher compression ratios than Snappy, with relatively smaller (~10%) slowdowns in de/compression speeds. Benchmarking results: $ blaze-bin/third_party/leveldb/db_bench LevelDB: version 1.23 Date: Thu Feb 2 18:50:06 2023 CPU: 56 * Intel(R) Xeon(R) CPU E5-2690 v4 @ 2.60GHz CPUCache: 35840 KB Keys: 16 bytes each Values: 100 bytes each (50 bytes after compression) Entries: 1000000 RawSize: 110.6 MB (estimated) FileSize: 62.9 MB (estimated) ------------------------------------------------ fillseq : 2.613 micros/op; 42.3 MB/s fillsync : 3924.432 micros/op; 0.0 MB/s (1000 ops) fillrandom : 3.609 micros/op; 30.7 MB/s overwrite : 4.508 micros/op; 24.5 MB/s readrandom : 6.136 micros/op; (864322 of 1000000 found) readrandom : 5.446 micros/op; (864083 of 1000000 found) readseq : 0.180 micros/op; 613.3 MB/s readreverse : 0.321 micros/op; 344.7 MB/s compact : 827043.000 micros/op; readrandom : 4.603 micros/op; (864105 of 1000000 found) readseq : 0.169 micros/op; 656.3 MB/s readreverse : 0.315 micros/op; 350.8 MB/s fill100K : 854.009 micros/op; 111.7 MB/s (1000 ops) crc32c : 1.227 micros/op; 3184.0 MB/s (4K per op) snappycomp : 3.610 micros/op; 1081.9 MB/s (output: 55.2%) snappyuncomp : 0.691 micros/op; 5656.3 MB/s zstdcomp : 15.731 micros/op; 248.3 MB/s (output: 44.1%) zstduncomp : 4.218 micros/op; 926.2 MB/s PiperOrigin-RevId: 509957778
vor 1 Jahr
  1. // Copyright (c) 2011 The LevelDB Authors. All rights reserved.
  2. // Use of this source code is governed by a BSD-style license that can be
  3. // found in the LICENSE file. See the AUTHORS file for names of contributors.
  4. #include "leveldb/table_builder.h"
  5. #include <cassert>
  6. #include "leveldb/comparator.h"
  7. #include "leveldb/env.h"
  8. #include "leveldb/filter_policy.h"
  9. #include "leveldb/options.h"
  10. #include "table/block_builder.h"
  11. #include "table/filter_block.h"
  12. #include "table/format.h"
  13. #include "util/coding.h"
  14. #include "util/crc32c.h"
  15. namespace leveldb {
  16. struct TableBuilder::Rep {
  17. Rep(const Options& opt, WritableFile* f)
  18. : options(opt),
  19. index_block_options(opt),
  20. file(f),
  21. offset(0),
  22. data_block(&options),
  23. index_block(&index_block_options),
  24. num_entries(0),
  25. closed(false),
  26. filter_block(opt.filter_policy == nullptr
  27. ? nullptr
  28. : new FilterBlockBuilder(opt.filter_policy)),
  29. pending_index_entry(false) {
  30. index_block_options.block_restart_interval = 1;
  31. }
  32. Options options;
  33. Options index_block_options;
  34. WritableFile* file;
  35. uint64_t offset;
  36. Status status;
  37. BlockBuilder data_block;
  38. BlockBuilder index_block;
  39. std::string last_key;
  40. int64_t num_entries;
  41. bool closed; // Either Finish() or Abandon() has been called.
  42. FilterBlockBuilder* filter_block;
  43. // We do not emit the index entry for a block until we have seen the
  44. // first key for the next data block. This allows us to use shorter
  45. // keys in the index block. For example, consider a block boundary
  46. // between the keys "the quick brown fox" and "the who". We can use
  47. // "the r" as the key for the index block entry since it is >= all
  48. // entries in the first block and < all entries in subsequent
  49. // blocks.
  50. //
  51. // Invariant: r->pending_index_entry is true only if data_block is empty.
  52. bool pending_index_entry;
  53. BlockHandle pending_handle; // Handle to add to index block
  54. std::string compressed_output;
  55. };
  56. TableBuilder::TableBuilder(const Options& options, WritableFile* file)
  57. : rep_(new Rep(options, file)) {
  58. if (rep_->filter_block != nullptr) {
  59. rep_->filter_block->StartBlock(0);
  60. }
  61. }
  62. TableBuilder::~TableBuilder() {
  63. assert(rep_->closed); // Catch errors where caller forgot to call Finish()
  64. delete rep_->filter_block;
  65. delete rep_;
  66. }
  67. Status TableBuilder::ChangeOptions(const Options& options) {
  68. // Note: if more fields are added to Options, update
  69. // this function to catch changes that should not be allowed to
  70. // change in the middle of building a Table.
  71. if (options.comparator != rep_->options.comparator) {
  72. return Status::InvalidArgument("changing comparator while building table");
  73. }
  74. // Note that any live BlockBuilders point to rep_->options and therefore
  75. // will automatically pick up the updated options.
  76. rep_->options = options;
  77. rep_->index_block_options = options;
  78. rep_->index_block_options.block_restart_interval = 1;
  79. return Status::OK();
  80. }
  81. void TableBuilder::Add(const Slice& key, const Slice& value) {
  82. Rep* r = rep_;
  83. assert(!r->closed);
  84. if (!ok()) return;
  85. if (r->num_entries > 0) {
  86. assert(r->options.comparator->Compare(key, Slice(r->last_key)) > 0);
  87. }
  88. if (r->pending_index_entry) {
  89. assert(r->data_block.empty());
  90. r->options.comparator->FindShortestSeparator(&r->last_key, key);
  91. std::string handle_encoding;
  92. r->pending_handle.EncodeTo(&handle_encoding);
  93. r->index_block.Add(r->last_key, Slice(handle_encoding));
  94. r->pending_index_entry = false;
  95. }
  96. if (r->filter_block != nullptr) {
  97. r->filter_block->AddKey(key);
  98. }
  99. r->last_key.assign(key.data(), key.size());
  100. r->num_entries++;
  101. r->data_block.Add(key, value);
  102. const size_t estimated_block_size = r->data_block.CurrentSizeEstimate();
  103. if (estimated_block_size >= r->options.block_size) {
  104. Flush();
  105. }
  106. }
  107. void TableBuilder::Flush() {
  108. Rep* r = rep_;
  109. assert(!r->closed);
  110. if (!ok()) return;
  111. if (r->data_block.empty()) return;
  112. assert(!r->pending_index_entry);
  113. WriteBlock(&r->data_block, &r->pending_handle);
  114. if (ok()) {
  115. r->pending_index_entry = true;
  116. r->status = r->file->Flush();
  117. }
  118. if (r->filter_block != nullptr) {
  119. r->filter_block->StartBlock(r->offset);
  120. }
  121. }
  122. void TableBuilder::WriteBlock(BlockBuilder* block, BlockHandle* handle) {
  123. // File format contains a sequence of blocks where each block has:
  124. // block_data: uint8[n]
  125. // type: uint8
  126. // crc: uint32
  127. assert(ok());
  128. Rep* r = rep_;
  129. Slice raw = block->Finish();
  130. Slice block_contents;
  131. CompressionType type = r->options.compression;
  132. // TODO(postrelease): Support more compression options: zlib?
  133. switch (type) {
  134. case kNoCompression:
  135. block_contents = raw;
  136. break;
  137. case kSnappyCompression: {
  138. std::string* compressed = &r->compressed_output;
  139. if (port::Snappy_Compress(raw.data(), raw.size(), compressed) &&
  140. compressed->size() < raw.size() - (raw.size() / 8u)) {
  141. block_contents = *compressed;
  142. } else {
  143. // Snappy not supported, or compressed less than 12.5%, so just
  144. // store uncompressed form
  145. block_contents = raw;
  146. type = kNoCompression;
  147. }
  148. break;
  149. }
  150. case kZstdCompression: {
  151. std::string* compressed = &r->compressed_output;
  152. if (port::Zstd_Compress(r->options.zstd_compression_level, raw.data(),
  153. raw.size(), compressed) &&
  154. compressed->size() < raw.size() - (raw.size() / 8u)) {
  155. block_contents = *compressed;
  156. } else {
  157. // Zstd not supported, or compressed less than 12.5%, so just
  158. // store uncompressed form
  159. block_contents = raw;
  160. type = kNoCompression;
  161. }
  162. break;
  163. }
  164. }
  165. WriteRawBlock(block_contents, type, handle);
  166. r->compressed_output.clear();
  167. block->Reset();
  168. }
  169. void TableBuilder::WriteRawBlock(const Slice& block_contents,
  170. CompressionType type, BlockHandle* handle) {
  171. Rep* r = rep_;
  172. handle->set_offset(r->offset);
  173. handle->set_size(block_contents.size());
  174. r->status = r->file->Append(block_contents);
  175. if (r->status.ok()) {
  176. char trailer[kBlockTrailerSize];
  177. trailer[0] = type;
  178. uint32_t crc = crc32c::Value(block_contents.data(), block_contents.size());
  179. crc = crc32c::Extend(crc, trailer, 1); // Extend crc to cover block type
  180. EncodeFixed32(trailer + 1, crc32c::Mask(crc));
  181. r->status = r->file->Append(Slice(trailer, kBlockTrailerSize));
  182. if (r->status.ok()) {
  183. r->offset += block_contents.size() + kBlockTrailerSize;
  184. }
  185. }
  186. }
  187. Status TableBuilder::status() const { return rep_->status; }
  188. Status TableBuilder::Finish() {
  189. Rep* r = rep_;
  190. Flush();
  191. assert(!r->closed);
  192. r->closed = true;
  193. BlockHandle filter_block_handle, metaindex_block_handle, index_block_handle;
  194. // Write filter block
  195. if (ok() && r->filter_block != nullptr) {
  196. WriteRawBlock(r->filter_block->Finish(), kNoCompression,
  197. &filter_block_handle);
  198. }
  199. // Write metaindex block
  200. if (ok()) {
  201. BlockBuilder meta_index_block(&r->options);
  202. if (r->filter_block != nullptr) {
  203. // Add mapping from "filter.Name" to location of filter data
  204. std::string key = "filter.";
  205. key.append(r->options.filter_policy->Name());
  206. std::string handle_encoding;
  207. filter_block_handle.EncodeTo(&handle_encoding);
  208. meta_index_block.Add(key, handle_encoding);
  209. }
  210. // TODO(postrelease): Add stats and other meta blocks
  211. WriteBlock(&meta_index_block, &metaindex_block_handle);
  212. }
  213. // Write index block
  214. if (ok()) {
  215. if (r->pending_index_entry) {
  216. r->options.comparator->FindShortSuccessor(&r->last_key);
  217. std::string handle_encoding;
  218. r->pending_handle.EncodeTo(&handle_encoding);
  219. r->index_block.Add(r->last_key, Slice(handle_encoding));
  220. r->pending_index_entry = false;
  221. }
  222. WriteBlock(&r->index_block, &index_block_handle);
  223. }
  224. // Write footer
  225. if (ok()) {
  226. Footer footer;
  227. footer.set_metaindex_handle(metaindex_block_handle);
  228. footer.set_index_handle(index_block_handle);
  229. std::string footer_encoding;
  230. footer.EncodeTo(&footer_encoding);
  231. r->status = r->file->Append(footer_encoding);
  232. if (r->status.ok()) {
  233. r->offset += footer_encoding.size();
  234. }
  235. }
  236. return r->status;
  237. }
  238. void TableBuilder::Abandon() {
  239. Rep* r = rep_;
  240. assert(!r->closed);
  241. r->closed = true;
  242. }
  243. uint64_t TableBuilder::NumEntries() const { return rep_->num_entries; }
  244. uint64_t TableBuilder::FileSize() const { return rep_->offset; }
  245. } // namespace leveldb