Nelze vybrat více než 25 témat Téma musí začínat písmenem nebo číslem, může obsahovat pomlčky („-“) a může být dlouhé až 35 znaků.

218 řádky
5.3 KiB

Replace SSE-optimized CRC32C in POSIX port with external library. Maintaining a hardware-accelerated CRC32C implementation tailored for all modern platforms deserves a repository of its own. We extracted the implementation here into https://github.com/google/crc32c and improved it in that repository. This CL removes the SSE-optimized implementation from this codebase, and adds the ability to use the google/crc32c library, if it is present on the system. The benchmarks below show the performance impact of the change. In summary, open source builds that use the google/crc32c library can expect a 3x improvement in CRC32C throughput, whereas builds that do not use the library will see a 50% drop in CRC32C throughput. This translates in much smaller changes in overall leveldb performance. Baseline, MacBookPro13,3 with Core i7 6920HQ: LevelDB: version 1.20 Keys: 16 bytes each Values: 100 bytes each (50 bytes after compression) Entries: 1000000 RawSize: 110.6 MB (estimated) FileSize: 62.9 MB (estimated) ------------------------------------------------ fillseq : 3.064 micros/op; 36.1 MB/s fillsync : 57.861 micros/op; 1.9 MB/s (1000 ops) fillrandom : 3.887 micros/op; 28.5 MB/s overwrite : 4.140 micros/op; 26.7 MB/s readrandom : 7.433 micros/op; (1000000 of 1000000 found) readrandom : 6.825 micros/op; (1000000 of 1000000 found) readseq : 0.244 micros/op; 453.4 MB/s readreverse : 0.387 micros/op; 285.8 MB/s compact : 449707.000 micros/op; readrandom : 4.196 micros/op; (1000000 of 1000000 found) readseq : 0.228 micros/op; 485.8 MB/s readreverse : 0.320 micros/op; 345.2 MB/s fill100K : 562.556 micros/op; 169.6 MB/s (1000 ops) crc32c : 0.768 micros/op; 5085.0 MB/s (4K per op) snappycomp : 4.220 micros/op; 925.7 MB/s (output: 55.1%) snappyuncomp : 0.635 micros/op; 6155.7 MB/s acquireload : 13.054 micros/op; (each op is 1000 loads) New with crc32c, MacBookPro13,3 with Core i7 6920HQ: LevelDB: version 1.20 Keys: 16 bytes each Values: 100 bytes each (50 bytes after compression) Entries: 1000000 RawSize: 110.6 MB (estimated) FileSize: 62.9 MB (estimated) ------------------------------------------------ fillseq : 2.820 micros/op; 39.2 MB/s fillsync : 51.988 micros/op; 2.1 MB/s (1000 ops) fillrandom : 3.747 micros/op; 29.5 MB/s overwrite : 4.047 micros/op; 27.3 MB/s readrandom : 7.287 micros/op; (1000000 of 1000000 found) readrandom : 6.927 micros/op; (1000000 of 1000000 found) readseq : 0.253 micros/op; 437.5 MB/s readreverse : 0.411 micros/op; 269.2 MB/s compact : 440405.000 micros/op; readrandom : 4.159 micros/op; (1000000 of 1000000 found) readseq : 0.230 micros/op; 481.1 MB/s readreverse : 0.320 micros/op; 345.9 MB/s fill100K : 558.222 micros/op; 170.9 MB/s (1000 ops) crc32c : 0.214 micros/op; 18263.5 MB/s (4K per op) snappycomp : 4.471 micros/op; 873.7 MB/s (output: 55.1%) snappyuncomp : 0.833 micros/op; 4688.5 MB/s acquireload : 13.289 micros/op; (each op is 1000 loads) New without crc32c, MacBookPro13,3 with Core i7 6920HQ LevelDB: version 1.20 Keys: 16 bytes each Values: 100 bytes each (50 bytes after compression) Entries: 1000000 RawSize: 110.6 MB (estimated) FileSize: 62.9 MB (estimated) ------------------------------------------------ fillseq : 3.094 micros/op; 35.8 MB/s fillsync : 52.160 micros/op; 2.1 MB/s (1000 ops) fillrandom : 4.090 micros/op; 27.0 MB/s overwrite : 4.006 micros/op; 27.6 MB/s readrandom : 6.584 micros/op; (1000000 of 1000000 found) readrandom : 6.676 micros/op; (1000000 of 1000000 found) readseq : 0.280 micros/op; 395.2 MB/s readreverse : 0.391 micros/op; 283.2 MB/s compact : 433911.000 micros/op; readrandom : 4.261 micros/op; (1000000 of 1000000 found) readseq : 0.251 micros/op; 440.5 MB/s readreverse : 0.356 micros/op; 310.9 MB/s fill100K : 584.023 micros/op; 163.3 MB/s (1000 ops) crc32c : 1.384 micros/op; 2822.3 MB/s (4K per op) snappycomp : 4.763 micros/op; 820.1 MB/s (output: 55.1%) snappyuncomp : 0.766 micros/op; 5098.6 MB/s acquireload : 12.931 micros/op; (each op is 1000 loads) ------------- Created by MOE: https://github.com/google/moe MOE_MIGRATED_REVID=171667771
před 7 roky
Add support for Zstd-based compression in LevelDB. This change implements support for Zstd-based compression in LevelDB. Building up from the Snappy compression (which has been supported since inception), this change adds Zstd as an alternate compression algorithm. We are implementing this to provide alternative options for users who might have different performance and efficiency requirements. For instance, the Zstandard website (https://facebook.github.io/zstd/) claims that the Zstd algorithm can achieve around 30% higher compression ratios than Snappy, with relatively smaller (~10%) slowdowns in de/compression speeds. Benchmarking results: $ blaze-bin/third_party/leveldb/db_bench LevelDB: version 1.23 Date: Thu Feb 2 18:50:06 2023 CPU: 56 * Intel(R) Xeon(R) CPU E5-2690 v4 @ 2.60GHz CPUCache: 35840 KB Keys: 16 bytes each Values: 100 bytes each (50 bytes after compression) Entries: 1000000 RawSize: 110.6 MB (estimated) FileSize: 62.9 MB (estimated) ------------------------------------------------ fillseq : 2.613 micros/op; 42.3 MB/s fillsync : 3924.432 micros/op; 0.0 MB/s (1000 ops) fillrandom : 3.609 micros/op; 30.7 MB/s overwrite : 4.508 micros/op; 24.5 MB/s readrandom : 6.136 micros/op; (864322 of 1000000 found) readrandom : 5.446 micros/op; (864083 of 1000000 found) readseq : 0.180 micros/op; 613.3 MB/s readreverse : 0.321 micros/op; 344.7 MB/s compact : 827043.000 micros/op; readrandom : 4.603 micros/op; (864105 of 1000000 found) readseq : 0.169 micros/op; 656.3 MB/s readreverse : 0.315 micros/op; 350.8 MB/s fill100K : 854.009 micros/op; 111.7 MB/s (1000 ops) crc32c : 1.227 micros/op; 3184.0 MB/s (4K per op) snappycomp : 3.610 micros/op; 1081.9 MB/s (output: 55.2%) snappyuncomp : 0.691 micros/op; 5656.3 MB/s zstdcomp : 15.731 micros/op; 248.3 MB/s (output: 44.1%) zstduncomp : 4.218 micros/op; 926.2 MB/s PiperOrigin-RevId: 509957778
před 1 rokem
Add support for Zstd-based compression in LevelDB. This change implements support for Zstd-based compression in LevelDB. Building up from the Snappy compression (which has been supported since inception), this change adds Zstd as an alternate compression algorithm. We are implementing this to provide alternative options for users who might have different performance and efficiency requirements. For instance, the Zstandard website (https://facebook.github.io/zstd/) claims that the Zstd algorithm can achieve around 30% higher compression ratios than Snappy, with relatively smaller (~10%) slowdowns in de/compression speeds. Benchmarking results: $ blaze-bin/third_party/leveldb/db_bench LevelDB: version 1.23 Date: Thu Feb 2 18:50:06 2023 CPU: 56 * Intel(R) Xeon(R) CPU E5-2690 v4 @ 2.60GHz CPUCache: 35840 KB Keys: 16 bytes each Values: 100 bytes each (50 bytes after compression) Entries: 1000000 RawSize: 110.6 MB (estimated) FileSize: 62.9 MB (estimated) ------------------------------------------------ fillseq : 2.613 micros/op; 42.3 MB/s fillsync : 3924.432 micros/op; 0.0 MB/s (1000 ops) fillrandom : 3.609 micros/op; 30.7 MB/s overwrite : 4.508 micros/op; 24.5 MB/s readrandom : 6.136 micros/op; (864322 of 1000000 found) readrandom : 5.446 micros/op; (864083 of 1000000 found) readseq : 0.180 micros/op; 613.3 MB/s readreverse : 0.321 micros/op; 344.7 MB/s compact : 827043.000 micros/op; readrandom : 4.603 micros/op; (864105 of 1000000 found) readseq : 0.169 micros/op; 656.3 MB/s readreverse : 0.315 micros/op; 350.8 MB/s fill100K : 854.009 micros/op; 111.7 MB/s (1000 ops) crc32c : 1.227 micros/op; 3184.0 MB/s (4K per op) snappycomp : 3.610 micros/op; 1081.9 MB/s (output: 55.2%) snappyuncomp : 0.691 micros/op; 5656.3 MB/s zstdcomp : 15.731 micros/op; 248.3 MB/s (output: 44.1%) zstduncomp : 4.218 micros/op; 926.2 MB/s PiperOrigin-RevId: 509957778
před 1 rokem
Replace SSE-optimized CRC32C in POSIX port with external library. Maintaining a hardware-accelerated CRC32C implementation tailored for all modern platforms deserves a repository of its own. We extracted the implementation here into https://github.com/google/crc32c and improved it in that repository. This CL removes the SSE-optimized implementation from this codebase, and adds the ability to use the google/crc32c library, if it is present on the system. The benchmarks below show the performance impact of the change. In summary, open source builds that use the google/crc32c library can expect a 3x improvement in CRC32C throughput, whereas builds that do not use the library will see a 50% drop in CRC32C throughput. This translates in much smaller changes in overall leveldb performance. Baseline, MacBookPro13,3 with Core i7 6920HQ: LevelDB: version 1.20 Keys: 16 bytes each Values: 100 bytes each (50 bytes after compression) Entries: 1000000 RawSize: 110.6 MB (estimated) FileSize: 62.9 MB (estimated) ------------------------------------------------ fillseq : 3.064 micros/op; 36.1 MB/s fillsync : 57.861 micros/op; 1.9 MB/s (1000 ops) fillrandom : 3.887 micros/op; 28.5 MB/s overwrite : 4.140 micros/op; 26.7 MB/s readrandom : 7.433 micros/op; (1000000 of 1000000 found) readrandom : 6.825 micros/op; (1000000 of 1000000 found) readseq : 0.244 micros/op; 453.4 MB/s readreverse : 0.387 micros/op; 285.8 MB/s compact : 449707.000 micros/op; readrandom : 4.196 micros/op; (1000000 of 1000000 found) readseq : 0.228 micros/op; 485.8 MB/s readreverse : 0.320 micros/op; 345.2 MB/s fill100K : 562.556 micros/op; 169.6 MB/s (1000 ops) crc32c : 0.768 micros/op; 5085.0 MB/s (4K per op) snappycomp : 4.220 micros/op; 925.7 MB/s (output: 55.1%) snappyuncomp : 0.635 micros/op; 6155.7 MB/s acquireload : 13.054 micros/op; (each op is 1000 loads) New with crc32c, MacBookPro13,3 with Core i7 6920HQ: LevelDB: version 1.20 Keys: 16 bytes each Values: 100 bytes each (50 bytes after compression) Entries: 1000000 RawSize: 110.6 MB (estimated) FileSize: 62.9 MB (estimated) ------------------------------------------------ fillseq : 2.820 micros/op; 39.2 MB/s fillsync : 51.988 micros/op; 2.1 MB/s (1000 ops) fillrandom : 3.747 micros/op; 29.5 MB/s overwrite : 4.047 micros/op; 27.3 MB/s readrandom : 7.287 micros/op; (1000000 of 1000000 found) readrandom : 6.927 micros/op; (1000000 of 1000000 found) readseq : 0.253 micros/op; 437.5 MB/s readreverse : 0.411 micros/op; 269.2 MB/s compact : 440405.000 micros/op; readrandom : 4.159 micros/op; (1000000 of 1000000 found) readseq : 0.230 micros/op; 481.1 MB/s readreverse : 0.320 micros/op; 345.9 MB/s fill100K : 558.222 micros/op; 170.9 MB/s (1000 ops) crc32c : 0.214 micros/op; 18263.5 MB/s (4K per op) snappycomp : 4.471 micros/op; 873.7 MB/s (output: 55.1%) snappyuncomp : 0.833 micros/op; 4688.5 MB/s acquireload : 13.289 micros/op; (each op is 1000 loads) New without crc32c, MacBookPro13,3 with Core i7 6920HQ LevelDB: version 1.20 Keys: 16 bytes each Values: 100 bytes each (50 bytes after compression) Entries: 1000000 RawSize: 110.6 MB (estimated) FileSize: 62.9 MB (estimated) ------------------------------------------------ fillseq : 3.094 micros/op; 35.8 MB/s fillsync : 52.160 micros/op; 2.1 MB/s (1000 ops) fillrandom : 4.090 micros/op; 27.0 MB/s overwrite : 4.006 micros/op; 27.6 MB/s readrandom : 6.584 micros/op; (1000000 of 1000000 found) readrandom : 6.676 micros/op; (1000000 of 1000000 found) readseq : 0.280 micros/op; 395.2 MB/s readreverse : 0.391 micros/op; 283.2 MB/s compact : 433911.000 micros/op; readrandom : 4.261 micros/op; (1000000 of 1000000 found) readseq : 0.251 micros/op; 440.5 MB/s readreverse : 0.356 micros/op; 310.9 MB/s fill100K : 584.023 micros/op; 163.3 MB/s (1000 ops) crc32c : 1.384 micros/op; 2822.3 MB/s (4K per op) snappycomp : 4.763 micros/op; 820.1 MB/s (output: 55.1%) snappyuncomp : 0.766 micros/op; 5098.6 MB/s acquireload : 12.931 micros/op; (each op is 1000 loads) ------------- Created by MOE: https://github.com/google/moe MOE_MIGRATED_REVID=171667771
před 7 roky
Replace SSE-optimized CRC32C in POSIX port with external library. Maintaining a hardware-accelerated CRC32C implementation tailored for all modern platforms deserves a repository of its own. We extracted the implementation here into https://github.com/google/crc32c and improved it in that repository. This CL removes the SSE-optimized implementation from this codebase, and adds the ability to use the google/crc32c library, if it is present on the system. The benchmarks below show the performance impact of the change. In summary, open source builds that use the google/crc32c library can expect a 3x improvement in CRC32C throughput, whereas builds that do not use the library will see a 50% drop in CRC32C throughput. This translates in much smaller changes in overall leveldb performance. Baseline, MacBookPro13,3 with Core i7 6920HQ: LevelDB: version 1.20 Keys: 16 bytes each Values: 100 bytes each (50 bytes after compression) Entries: 1000000 RawSize: 110.6 MB (estimated) FileSize: 62.9 MB (estimated) ------------------------------------------------ fillseq : 3.064 micros/op; 36.1 MB/s fillsync : 57.861 micros/op; 1.9 MB/s (1000 ops) fillrandom : 3.887 micros/op; 28.5 MB/s overwrite : 4.140 micros/op; 26.7 MB/s readrandom : 7.433 micros/op; (1000000 of 1000000 found) readrandom : 6.825 micros/op; (1000000 of 1000000 found) readseq : 0.244 micros/op; 453.4 MB/s readreverse : 0.387 micros/op; 285.8 MB/s compact : 449707.000 micros/op; readrandom : 4.196 micros/op; (1000000 of 1000000 found) readseq : 0.228 micros/op; 485.8 MB/s readreverse : 0.320 micros/op; 345.2 MB/s fill100K : 562.556 micros/op; 169.6 MB/s (1000 ops) crc32c : 0.768 micros/op; 5085.0 MB/s (4K per op) snappycomp : 4.220 micros/op; 925.7 MB/s (output: 55.1%) snappyuncomp : 0.635 micros/op; 6155.7 MB/s acquireload : 13.054 micros/op; (each op is 1000 loads) New with crc32c, MacBookPro13,3 with Core i7 6920HQ: LevelDB: version 1.20 Keys: 16 bytes each Values: 100 bytes each (50 bytes after compression) Entries: 1000000 RawSize: 110.6 MB (estimated) FileSize: 62.9 MB (estimated) ------------------------------------------------ fillseq : 2.820 micros/op; 39.2 MB/s fillsync : 51.988 micros/op; 2.1 MB/s (1000 ops) fillrandom : 3.747 micros/op; 29.5 MB/s overwrite : 4.047 micros/op; 27.3 MB/s readrandom : 7.287 micros/op; (1000000 of 1000000 found) readrandom : 6.927 micros/op; (1000000 of 1000000 found) readseq : 0.253 micros/op; 437.5 MB/s readreverse : 0.411 micros/op; 269.2 MB/s compact : 440405.000 micros/op; readrandom : 4.159 micros/op; (1000000 of 1000000 found) readseq : 0.230 micros/op; 481.1 MB/s readreverse : 0.320 micros/op; 345.9 MB/s fill100K : 558.222 micros/op; 170.9 MB/s (1000 ops) crc32c : 0.214 micros/op; 18263.5 MB/s (4K per op) snappycomp : 4.471 micros/op; 873.7 MB/s (output: 55.1%) snappyuncomp : 0.833 micros/op; 4688.5 MB/s acquireload : 13.289 micros/op; (each op is 1000 loads) New without crc32c, MacBookPro13,3 with Core i7 6920HQ LevelDB: version 1.20 Keys: 16 bytes each Values: 100 bytes each (50 bytes after compression) Entries: 1000000 RawSize: 110.6 MB (estimated) FileSize: 62.9 MB (estimated) ------------------------------------------------ fillseq : 3.094 micros/op; 35.8 MB/s fillsync : 52.160 micros/op; 2.1 MB/s (1000 ops) fillrandom : 4.090 micros/op; 27.0 MB/s overwrite : 4.006 micros/op; 27.6 MB/s readrandom : 6.584 micros/op; (1000000 of 1000000 found) readrandom : 6.676 micros/op; (1000000 of 1000000 found) readseq : 0.280 micros/op; 395.2 MB/s readreverse : 0.391 micros/op; 283.2 MB/s compact : 433911.000 micros/op; readrandom : 4.261 micros/op; (1000000 of 1000000 found) readseq : 0.251 micros/op; 440.5 MB/s readreverse : 0.356 micros/op; 310.9 MB/s fill100K : 584.023 micros/op; 163.3 MB/s (1000 ops) crc32c : 1.384 micros/op; 2822.3 MB/s (4K per op) snappycomp : 4.763 micros/op; 820.1 MB/s (output: 55.1%) snappyuncomp : 0.766 micros/op; 5098.6 MB/s acquireload : 12.931 micros/op; (each op is 1000 loads) ------------- Created by MOE: https://github.com/google/moe MOE_MIGRATED_REVID=171667771
před 7 roky
Replace SSE-optimized CRC32C in POSIX port with external library. Maintaining a hardware-accelerated CRC32C implementation tailored for all modern platforms deserves a repository of its own. We extracted the implementation here into https://github.com/google/crc32c and improved it in that repository. This CL removes the SSE-optimized implementation from this codebase, and adds the ability to use the google/crc32c library, if it is present on the system. The benchmarks below show the performance impact of the change. In summary, open source builds that use the google/crc32c library can expect a 3x improvement in CRC32C throughput, whereas builds that do not use the library will see a 50% drop in CRC32C throughput. This translates in much smaller changes in overall leveldb performance. Baseline, MacBookPro13,3 with Core i7 6920HQ: LevelDB: version 1.20 Keys: 16 bytes each Values: 100 bytes each (50 bytes after compression) Entries: 1000000 RawSize: 110.6 MB (estimated) FileSize: 62.9 MB (estimated) ------------------------------------------------ fillseq : 3.064 micros/op; 36.1 MB/s fillsync : 57.861 micros/op; 1.9 MB/s (1000 ops) fillrandom : 3.887 micros/op; 28.5 MB/s overwrite : 4.140 micros/op; 26.7 MB/s readrandom : 7.433 micros/op; (1000000 of 1000000 found) readrandom : 6.825 micros/op; (1000000 of 1000000 found) readseq : 0.244 micros/op; 453.4 MB/s readreverse : 0.387 micros/op; 285.8 MB/s compact : 449707.000 micros/op; readrandom : 4.196 micros/op; (1000000 of 1000000 found) readseq : 0.228 micros/op; 485.8 MB/s readreverse : 0.320 micros/op; 345.2 MB/s fill100K : 562.556 micros/op; 169.6 MB/s (1000 ops) crc32c : 0.768 micros/op; 5085.0 MB/s (4K per op) snappycomp : 4.220 micros/op; 925.7 MB/s (output: 55.1%) snappyuncomp : 0.635 micros/op; 6155.7 MB/s acquireload : 13.054 micros/op; (each op is 1000 loads) New with crc32c, MacBookPro13,3 with Core i7 6920HQ: LevelDB: version 1.20 Keys: 16 bytes each Values: 100 bytes each (50 bytes after compression) Entries: 1000000 RawSize: 110.6 MB (estimated) FileSize: 62.9 MB (estimated) ------------------------------------------------ fillseq : 2.820 micros/op; 39.2 MB/s fillsync : 51.988 micros/op; 2.1 MB/s (1000 ops) fillrandom : 3.747 micros/op; 29.5 MB/s overwrite : 4.047 micros/op; 27.3 MB/s readrandom : 7.287 micros/op; (1000000 of 1000000 found) readrandom : 6.927 micros/op; (1000000 of 1000000 found) readseq : 0.253 micros/op; 437.5 MB/s readreverse : 0.411 micros/op; 269.2 MB/s compact : 440405.000 micros/op; readrandom : 4.159 micros/op; (1000000 of 1000000 found) readseq : 0.230 micros/op; 481.1 MB/s readreverse : 0.320 micros/op; 345.9 MB/s fill100K : 558.222 micros/op; 170.9 MB/s (1000 ops) crc32c : 0.214 micros/op; 18263.5 MB/s (4K per op) snappycomp : 4.471 micros/op; 873.7 MB/s (output: 55.1%) snappyuncomp : 0.833 micros/op; 4688.5 MB/s acquireload : 13.289 micros/op; (each op is 1000 loads) New without crc32c, MacBookPro13,3 with Core i7 6920HQ LevelDB: version 1.20 Keys: 16 bytes each Values: 100 bytes each (50 bytes after compression) Entries: 1000000 RawSize: 110.6 MB (estimated) FileSize: 62.9 MB (estimated) ------------------------------------------------ fillseq : 3.094 micros/op; 35.8 MB/s fillsync : 52.160 micros/op; 2.1 MB/s (1000 ops) fillrandom : 4.090 micros/op; 27.0 MB/s overwrite : 4.006 micros/op; 27.6 MB/s readrandom : 6.584 micros/op; (1000000 of 1000000 found) readrandom : 6.676 micros/op; (1000000 of 1000000 found) readseq : 0.280 micros/op; 395.2 MB/s readreverse : 0.391 micros/op; 283.2 MB/s compact : 433911.000 micros/op; readrandom : 4.261 micros/op; (1000000 of 1000000 found) readseq : 0.251 micros/op; 440.5 MB/s readreverse : 0.356 micros/op; 310.9 MB/s fill100K : 584.023 micros/op; 163.3 MB/s (1000 ops) crc32c : 1.384 micros/op; 2822.3 MB/s (4K per op) snappycomp : 4.763 micros/op; 820.1 MB/s (output: 55.1%) snappyuncomp : 0.766 micros/op; 5098.6 MB/s acquireload : 12.931 micros/op; (each op is 1000 loads) ------------- Created by MOE: https://github.com/google/moe MOE_MIGRATED_REVID=171667771
před 7 roky
Replace SSE-optimized CRC32C in POSIX port with external library. Maintaining a hardware-accelerated CRC32C implementation tailored for all modern platforms deserves a repository of its own. We extracted the implementation here into https://github.com/google/crc32c and improved it in that repository. This CL removes the SSE-optimized implementation from this codebase, and adds the ability to use the google/crc32c library, if it is present on the system. The benchmarks below show the performance impact of the change. In summary, open source builds that use the google/crc32c library can expect a 3x improvement in CRC32C throughput, whereas builds that do not use the library will see a 50% drop in CRC32C throughput. This translates in much smaller changes in overall leveldb performance. Baseline, MacBookPro13,3 with Core i7 6920HQ: LevelDB: version 1.20 Keys: 16 bytes each Values: 100 bytes each (50 bytes after compression) Entries: 1000000 RawSize: 110.6 MB (estimated) FileSize: 62.9 MB (estimated) ------------------------------------------------ fillseq : 3.064 micros/op; 36.1 MB/s fillsync : 57.861 micros/op; 1.9 MB/s (1000 ops) fillrandom : 3.887 micros/op; 28.5 MB/s overwrite : 4.140 micros/op; 26.7 MB/s readrandom : 7.433 micros/op; (1000000 of 1000000 found) readrandom : 6.825 micros/op; (1000000 of 1000000 found) readseq : 0.244 micros/op; 453.4 MB/s readreverse : 0.387 micros/op; 285.8 MB/s compact : 449707.000 micros/op; readrandom : 4.196 micros/op; (1000000 of 1000000 found) readseq : 0.228 micros/op; 485.8 MB/s readreverse : 0.320 micros/op; 345.2 MB/s fill100K : 562.556 micros/op; 169.6 MB/s (1000 ops) crc32c : 0.768 micros/op; 5085.0 MB/s (4K per op) snappycomp : 4.220 micros/op; 925.7 MB/s (output: 55.1%) snappyuncomp : 0.635 micros/op; 6155.7 MB/s acquireload : 13.054 micros/op; (each op is 1000 loads) New with crc32c, MacBookPro13,3 with Core i7 6920HQ: LevelDB: version 1.20 Keys: 16 bytes each Values: 100 bytes each (50 bytes after compression) Entries: 1000000 RawSize: 110.6 MB (estimated) FileSize: 62.9 MB (estimated) ------------------------------------------------ fillseq : 2.820 micros/op; 39.2 MB/s fillsync : 51.988 micros/op; 2.1 MB/s (1000 ops) fillrandom : 3.747 micros/op; 29.5 MB/s overwrite : 4.047 micros/op; 27.3 MB/s readrandom : 7.287 micros/op; (1000000 of 1000000 found) readrandom : 6.927 micros/op; (1000000 of 1000000 found) readseq : 0.253 micros/op; 437.5 MB/s readreverse : 0.411 micros/op; 269.2 MB/s compact : 440405.000 micros/op; readrandom : 4.159 micros/op; (1000000 of 1000000 found) readseq : 0.230 micros/op; 481.1 MB/s readreverse : 0.320 micros/op; 345.9 MB/s fill100K : 558.222 micros/op; 170.9 MB/s (1000 ops) crc32c : 0.214 micros/op; 18263.5 MB/s (4K per op) snappycomp : 4.471 micros/op; 873.7 MB/s (output: 55.1%) snappyuncomp : 0.833 micros/op; 4688.5 MB/s acquireload : 13.289 micros/op; (each op is 1000 loads) New without crc32c, MacBookPro13,3 with Core i7 6920HQ LevelDB: version 1.20 Keys: 16 bytes each Values: 100 bytes each (50 bytes after compression) Entries: 1000000 RawSize: 110.6 MB (estimated) FileSize: 62.9 MB (estimated) ------------------------------------------------ fillseq : 3.094 micros/op; 35.8 MB/s fillsync : 52.160 micros/op; 2.1 MB/s (1000 ops) fillrandom : 4.090 micros/op; 27.0 MB/s overwrite : 4.006 micros/op; 27.6 MB/s readrandom : 6.584 micros/op; (1000000 of 1000000 found) readrandom : 6.676 micros/op; (1000000 of 1000000 found) readseq : 0.280 micros/op; 395.2 MB/s readreverse : 0.391 micros/op; 283.2 MB/s compact : 433911.000 micros/op; readrandom : 4.261 micros/op; (1000000 of 1000000 found) readseq : 0.251 micros/op; 440.5 MB/s readreverse : 0.356 micros/op; 310.9 MB/s fill100K : 584.023 micros/op; 163.3 MB/s (1000 ops) crc32c : 1.384 micros/op; 2822.3 MB/s (4K per op) snappycomp : 4.763 micros/op; 820.1 MB/s (output: 55.1%) snappyuncomp : 0.766 micros/op; 5098.6 MB/s acquireload : 12.931 micros/op; (each op is 1000 loads) ------------- Created by MOE: https://github.com/google/moe MOE_MIGRATED_REVID=171667771
před 7 roky
Replace SSE-optimized CRC32C in POSIX port with external library. Maintaining a hardware-accelerated CRC32C implementation tailored for all modern platforms deserves a repository of its own. We extracted the implementation here into https://github.com/google/crc32c and improved it in that repository. This CL removes the SSE-optimized implementation from this codebase, and adds the ability to use the google/crc32c library, if it is present on the system. The benchmarks below show the performance impact of the change. In summary, open source builds that use the google/crc32c library can expect a 3x improvement in CRC32C throughput, whereas builds that do not use the library will see a 50% drop in CRC32C throughput. This translates in much smaller changes in overall leveldb performance. Baseline, MacBookPro13,3 with Core i7 6920HQ: LevelDB: version 1.20 Keys: 16 bytes each Values: 100 bytes each (50 bytes after compression) Entries: 1000000 RawSize: 110.6 MB (estimated) FileSize: 62.9 MB (estimated) ------------------------------------------------ fillseq : 3.064 micros/op; 36.1 MB/s fillsync : 57.861 micros/op; 1.9 MB/s (1000 ops) fillrandom : 3.887 micros/op; 28.5 MB/s overwrite : 4.140 micros/op; 26.7 MB/s readrandom : 7.433 micros/op; (1000000 of 1000000 found) readrandom : 6.825 micros/op; (1000000 of 1000000 found) readseq : 0.244 micros/op; 453.4 MB/s readreverse : 0.387 micros/op; 285.8 MB/s compact : 449707.000 micros/op; readrandom : 4.196 micros/op; (1000000 of 1000000 found) readseq : 0.228 micros/op; 485.8 MB/s readreverse : 0.320 micros/op; 345.2 MB/s fill100K : 562.556 micros/op; 169.6 MB/s (1000 ops) crc32c : 0.768 micros/op; 5085.0 MB/s (4K per op) snappycomp : 4.220 micros/op; 925.7 MB/s (output: 55.1%) snappyuncomp : 0.635 micros/op; 6155.7 MB/s acquireload : 13.054 micros/op; (each op is 1000 loads) New with crc32c, MacBookPro13,3 with Core i7 6920HQ: LevelDB: version 1.20 Keys: 16 bytes each Values: 100 bytes each (50 bytes after compression) Entries: 1000000 RawSize: 110.6 MB (estimated) FileSize: 62.9 MB (estimated) ------------------------------------------------ fillseq : 2.820 micros/op; 39.2 MB/s fillsync : 51.988 micros/op; 2.1 MB/s (1000 ops) fillrandom : 3.747 micros/op; 29.5 MB/s overwrite : 4.047 micros/op; 27.3 MB/s readrandom : 7.287 micros/op; (1000000 of 1000000 found) readrandom : 6.927 micros/op; (1000000 of 1000000 found) readseq : 0.253 micros/op; 437.5 MB/s readreverse : 0.411 micros/op; 269.2 MB/s compact : 440405.000 micros/op; readrandom : 4.159 micros/op; (1000000 of 1000000 found) readseq : 0.230 micros/op; 481.1 MB/s readreverse : 0.320 micros/op; 345.9 MB/s fill100K : 558.222 micros/op; 170.9 MB/s (1000 ops) crc32c : 0.214 micros/op; 18263.5 MB/s (4K per op) snappycomp : 4.471 micros/op; 873.7 MB/s (output: 55.1%) snappyuncomp : 0.833 micros/op; 4688.5 MB/s acquireload : 13.289 micros/op; (each op is 1000 loads) New without crc32c, MacBookPro13,3 with Core i7 6920HQ LevelDB: version 1.20 Keys: 16 bytes each Values: 100 bytes each (50 bytes after compression) Entries: 1000000 RawSize: 110.6 MB (estimated) FileSize: 62.9 MB (estimated) ------------------------------------------------ fillseq : 3.094 micros/op; 35.8 MB/s fillsync : 52.160 micros/op; 2.1 MB/s (1000 ops) fillrandom : 4.090 micros/op; 27.0 MB/s overwrite : 4.006 micros/op; 27.6 MB/s readrandom : 6.584 micros/op; (1000000 of 1000000 found) readrandom : 6.676 micros/op; (1000000 of 1000000 found) readseq : 0.280 micros/op; 395.2 MB/s readreverse : 0.391 micros/op; 283.2 MB/s compact : 433911.000 micros/op; readrandom : 4.261 micros/op; (1000000 of 1000000 found) readseq : 0.251 micros/op; 440.5 MB/s readreverse : 0.356 micros/op; 310.9 MB/s fill100K : 584.023 micros/op; 163.3 MB/s (1000 ops) crc32c : 1.384 micros/op; 2822.3 MB/s (4K per op) snappycomp : 4.763 micros/op; 820.1 MB/s (output: 55.1%) snappyuncomp : 0.766 micros/op; 5098.6 MB/s acquireload : 12.931 micros/op; (each op is 1000 loads) ------------- Created by MOE: https://github.com/google/moe MOE_MIGRATED_REVID=171667771
před 7 roky
  1. // Copyright (c) 2018 The LevelDB Authors. All rights reserved.
  2. // Use of this source code is governed by a BSD-style license that can be
  3. // found in the LICENSE file. See the AUTHORS file for names of contributors.
  4. #ifndef STORAGE_LEVELDB_PORT_PORT_STDCXX_H_
  5. #define STORAGE_LEVELDB_PORT_PORT_STDCXX_H_
  6. // port/port_config.h availability is automatically detected via __has_include
  7. // in newer compilers. If LEVELDB_HAS_PORT_CONFIG_H is defined, it overrides the
  8. // configuration detection.
  9. #if defined(LEVELDB_HAS_PORT_CONFIG_H)
  10. #if LEVELDB_HAS_PORT_CONFIG_H
  11. #include "port/port_config.h"
  12. #endif // LEVELDB_HAS_PORT_CONFIG_H
  13. #elif defined(__has_include)
  14. #if __has_include("port/port_config.h")
  15. #include "port/port_config.h"
  16. #endif // __has_include("port/port_config.h")
  17. #endif // defined(LEVELDB_HAS_PORT_CONFIG_H)
  18. #if HAVE_CRC32C
  19. #include <crc32c/crc32c.h>
  20. #endif // HAVE_CRC32C
  21. #if HAVE_SNAPPY
  22. #include <snappy.h>
  23. #endif // HAVE_SNAPPY
  24. #if HAVE_ZSTD
  25. #include <zstd.h>
  26. #endif // HAVE_ZSTD
  27. #include <cassert>
  28. #include <condition_variable> // NOLINT
  29. #include <cstddef>
  30. #include <cstdint>
  31. #include <mutex> // NOLINT
  32. #include <string>
  33. #include "port/thread_annotations.h"
  34. namespace leveldb {
  35. namespace port {
  36. class CondVar;
  37. // Thinly wraps std::mutex.
  38. class LOCKABLE Mutex {
  39. public:
  40. Mutex() = default;
  41. ~Mutex() = default;
  42. Mutex(const Mutex&) = delete;
  43. Mutex& operator=(const Mutex&) = delete;
  44. void Lock() EXCLUSIVE_LOCK_FUNCTION() { mu_.lock(); }
  45. void Unlock() UNLOCK_FUNCTION() { mu_.unlock(); }
  46. void AssertHeld() ASSERT_EXCLUSIVE_LOCK() {}
  47. private:
  48. friend class CondVar;
  49. std::mutex mu_;
  50. };
  51. // Thinly wraps std::condition_variable.
  52. class CondVar {
  53. public:
  54. explicit CondVar(Mutex* mu) : mu_(mu) { assert(mu != nullptr); }
  55. ~CondVar() = default;
  56. CondVar(const CondVar&) = delete;
  57. CondVar& operator=(const CondVar&) = delete;
  58. void Wait() {
  59. std::unique_lock<std::mutex> lock(mu_->mu_, std::adopt_lock);
  60. cv_.wait(lock);
  61. lock.release();
  62. }
  63. void Signal() { cv_.notify_one(); }
  64. void SignalAll() { cv_.notify_all(); }
  65. private:
  66. std::condition_variable cv_;
  67. Mutex* const mu_;
  68. };
  69. inline bool Snappy_Compress(const char* input, size_t length,
  70. std::string* output) {
  71. #if HAVE_SNAPPY
  72. output->resize(snappy::MaxCompressedLength(length));
  73. size_t outlen;
  74. snappy::RawCompress(input, length, &(*output)[0], &outlen);
  75. output->resize(outlen);
  76. return true;
  77. #else
  78. // Silence compiler warnings about unused arguments.
  79. (void)input;
  80. (void)length;
  81. (void)output;
  82. #endif // HAVE_SNAPPY
  83. return false;
  84. }
  85. inline bool Snappy_GetUncompressedLength(const char* input, size_t length,
  86. size_t* result) {
  87. #if HAVE_SNAPPY
  88. return snappy::GetUncompressedLength(input, length, result);
  89. #else
  90. // Silence compiler warnings about unused arguments.
  91. (void)input;
  92. (void)length;
  93. (void)result;
  94. return false;
  95. #endif // HAVE_SNAPPY
  96. }
  97. inline bool Snappy_Uncompress(const char* input, size_t length, char* output) {
  98. #if HAVE_SNAPPY
  99. return snappy::RawUncompress(input, length, output);
  100. #else
  101. // Silence compiler warnings about unused arguments.
  102. (void)input;
  103. (void)length;
  104. (void)output;
  105. return false;
  106. #endif // HAVE_SNAPPY
  107. }
  108. inline bool Zstd_Compress(const char* input, size_t length,
  109. std::string* output) {
  110. #if HAVE_ZSTD
  111. // Get the MaxCompressedLength.
  112. size_t outlen = ZSTD_compressBound(length);
  113. if (ZSTD_isError(outlen)) {
  114. return false;
  115. }
  116. output->resize(outlen);
  117. ZSTD_CCtx* ctx = ZSTD_createCCtx();
  118. outlen = ZSTD_compress2(ctx, &(*output)[0], output->size(), input, length);
  119. ZSTD_freeCCtx(ctx);
  120. if (ZSTD_isError(outlen)) {
  121. return false;
  122. }
  123. output->resize(outlen);
  124. return true;
  125. #else
  126. // Silence compiler warnings about unused arguments.
  127. (void)input;
  128. (void)length;
  129. (void)output;
  130. return false;
  131. #endif // HAVE_ZSTD
  132. }
  133. inline bool Zstd_GetUncompressedLength(const char* input, size_t length,
  134. size_t* result) {
  135. #if HAVE_ZSTD
  136. size_t size = ZSTD_getFrameContentSize(input, length);
  137. if (size == 0) return false;
  138. *result = size;
  139. return true;
  140. #else
  141. // Silence compiler warnings about unused arguments.
  142. (void)input;
  143. (void)length;
  144. (void)result;
  145. return false;
  146. #endif // HAVE_ZSTD
  147. }
  148. inline bool Zstd_Uncompress(const char* input, size_t length, char* output) {
  149. #if HAVE_ZSTD
  150. size_t outlen;
  151. if (!Zstd_GetUncompressedLength(input, length, &outlen)) {
  152. return false;
  153. }
  154. ZSTD_DCtx* ctx = ZSTD_createDCtx();
  155. outlen = ZSTD_decompressDCtx(ctx, output, outlen, input, length);
  156. ZSTD_freeDCtx(ctx);
  157. if (ZSTD_isError(outlen)) {
  158. return false;
  159. }
  160. return true;
  161. #else
  162. // Silence compiler warnings about unused arguments.
  163. (void)input;
  164. (void)length;
  165. (void)output;
  166. return false;
  167. #endif // HAVE_ZSTD
  168. }
  169. inline bool GetHeapProfile(void (*func)(void*, const char*, int), void* arg) {
  170. // Silence compiler warnings about unused arguments.
  171. (void)func;
  172. (void)arg;
  173. return false;
  174. }
  175. inline uint32_t AcceleratedCRC32C(uint32_t crc, const char* buf, size_t size) {
  176. #if HAVE_CRC32C
  177. return ::crc32c::Extend(crc, reinterpret_cast<const uint8_t*>(buf), size);
  178. #else
  179. // Silence compiler warnings about unused arguments.
  180. (void)crc;
  181. (void)buf;
  182. (void)size;
  183. return 0;
  184. #endif // HAVE_CRC32C
  185. }
  186. } // namespace port
  187. } // namespace leveldb
  188. #endif // STORAGE_LEVELDB_PORT_PORT_STDCXX_H_