《操作系统》的实验代码。
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 

7.5 KiB

This program, called process-run.py, allows you to see how the state of a process state changes as it runs on a CPU. As described in the chapter, processes can be in a few different states:

RUNNING - the process is using the CPU right now READY - the process could be using the CPU right now but (alas) some other process is WAITING - the process is waiting on I/O (e.g., it issued a request to a disk) DONE - the process is finished executing

In this homework, we'll see how these process states change as a program runs, and thus learn a little bit better how these things work.

To run the program and get its options, do this:

prompt> ./process-run.py -h

If this doesn't work, type "python" before the command, like this:

prompt> python process-run.py -h

What you should see is this:

Usage: process-run.py [options]

Options: -h, --help show this help message and exit -s SEED, --seed=SEED the random seed -l PROCESS_LIST, --processlist=PROCESS_LIST a comma-separated list of processes to run, in the form X1:Y1,X2:Y2,... where X is the number of instructions that process should run, and Y the chances (from 0 to 100) that an instruction will use the CPU or issue an IO -L IO_LENGTH, --iolength=IO_LENGTH how long an IO takes -S PROCESS_SWITCH_BEHAVIOR, --switch=PROCESS_SWITCH_BEHAVIOR when to switch between processes: SWITCH_ON_IO, SWITCH_ON_END -I IO_DONE_BEHAVIOR, --iodone=IO_DONE_BEHAVIOR type of behavior when IO ends: IO_RUN_LATER, IO_RUN_IMMEDIATE -c compute answers for me -p, --printstats print statistics at end; only useful with -c flag (otherwise stats are not printed)

The most important option to understand is the PROCESS_LIST (as specified by the -l or --processlist flags) which specifies exactly what each running program (or "process") will do. A process consist of instructions, and each instruction can just do one of two things:

  • use the CPU
  • issue an IO (and wait for it to complete)

When a process uses the CPU (and does no IO at all), it should simply alternate between RUNNING on the CPU or being READY to run. For example, here is a simple run that just has one program being run, and that program only uses the CPU (it does no IO).

prompt> ./process-run.py -l 5:100 -p Produce a trace of what would happen when you run these processes: Process 0 cpu cpu cpu cpu cpu

Important behaviors: System will switch when the current process is FINISHED or ISSUES AN IO After IOs, the process issuing the IO will run LATER (when it is its turn)

prompt>

Here, the process we specified is "5:100" which means it should consist of 5 instructions, and the chances that each instruction is a CPU instruction are 100%.

You can see what happens to the process by using the -c flag, which computes the answers for you:

prompt> ./process-run.py -l 5:100 -c Time PID: 0 CPU IOs 1 RUN:cpu 1 2 RUN:cpu 1 3 RUN:cpu 1 4 RUN:cpu 1 5 RUN:cpu 1

This result is not too interesting: the process is simple in the RUN state and then finishes, using the CPU the whole time and thus keeping the CPU busy the entire run, and not doing any I/Os.

Let's make it slightly more complex by running two processes:

prompt> ./process-run.py -l 5:100,5:100 Produce a trace of what would happen when you run these processes: Process 0 cpu cpu cpu cpu cpu

Process 1 cpu cpu cpu cpu cpu

Important behaviors: Scheduler will switch when the current process is FINISHED or ISSUES AN IO After IOs, the process issuing the IO will run LATER (when it is its turn)

In this case, two different processes run, each again just using the CPU. What happens when the operating system runs them? Let's find out:

prompt> ./process-run.py -l 5:100,5:100 -c Time PID: 0 PID: 1 CPU IOs 1 RUN:cpu READY 1 2 RUN:cpu READY 1 3 RUN:cpu READY 1 4 RUN:cpu READY 1 5 RUN:cpu READY 1 6 DONE RUN:cpu 1 7 DONE RUN:cpu 1 8 DONE RUN:cpu 1 9 DONE RUN:cpu 1 10 DONE RUN:cpu 1

As you can see above, first the process with "process ID" (or "PID") 0 runs, while process 1 is READY to run but just waits until 0 is done. When 0 is finished, it moves to the DONE state, while 1 runs. When 1 finishes, the trace is done.

Let's look at one more example before getting to some questions. In this example, the process just issues I/O requests.

prompt> ./process-run.py -l 3:0 Produce a trace of what would happen when you run these processes: Process 0 io-start io-start io-start

Important behaviors: System will switch when the current process is FINISHED or ISSUES AN IO After IOs, the process issuing the IO will run LATER (when it is its turn)

What do you think the execution trace will look like? Let's find out:

prompt> ./process-run.py -l 3:0 -c Time PID: 0 CPU IOs 1 RUN:io-start 1 2 WAITING 1 3 WAITING 1 4 WAITING 1 5 WAITING 1 6* RUN:io-start 1 7 WAITING 1 8 WAITING 1 9 WAITING 1 10 WAITING 1 11* RUN:io-start 1 12 WAITING 1 13 WAITING 1 14 WAITING 1 15 WAITING 1 16* DONE

As you can see, the program just issues three I/Os. When each I/O is issued, the process moves to a WAITING state, and while the device is busy servicing the I/O, the CPU is idle.

Let's print some stats (run the same command as above, but with the -p flag) to see some overall behaviors:

Stats: Total Time 16 Stats: CPU Busy 3 (18.75%) Stats: IO Busy 12 (75.00%)

As you can see, the trace took 16 clock ticks to run, but the CPU was only busy less than 20% of the time. The IO device, on the other hand, was quite busy. In general, we'd like to keep all the devices busy, as that is a better use of resources.

There are a few other important flags: -s SEED, --seed=SEED the random seed
this gives you way to create a bunch of different jobs randomly

-L IO_LENGTH, --iolength=IO_LENGTH this determines how long IOs take to complete (default is 5 ticks)

-S PROCESS_SWITCH_BEHAVIOR, --switch=PROCESS_SWITCH_BEHAVIOR when to switch between processes: SWITCH_ON_IO, SWITCH_ON_END this determines when we switch to another process: - SWITCH_ON_IO, the system will switch when a process issues an IO - SWITCH_ON_END, the system will only switch when the current process is done

-I IO_DONE_BEHAVIOR, --iodone=IO_DONE_BEHAVIOR type of behavior when IO ends: IO_RUN_LATER, IO_RUN_IMMEDIATE this determines when a process runs after it issues an IO: - IO_RUN_IMMEDIATE: switch to this process right now - IO_RUN_LATER: switch to this process when it is natural to (e.g., depending on process-switching behavior)

Now go answer the questions at the back of the chapter to learn more.