You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
107 lines
3.8 KiB
107 lines
3.8 KiB
#include <asm.h>
|
|
|
|
# Start the CPU: switch to 32-bit protected mode, jump into C.
|
|
# The BIOS loads this code from the first sector of the hard disk into
|
|
# memory at physical address 0x7c00 and starts executing in real mode
|
|
# with %cs=0 %ip=7c00.
|
|
|
|
.set PROT_MODE_CSEG, 0x8 # kernel code segment selector
|
|
.set PROT_MODE_DSEG, 0x10 # kernel data segment selector
|
|
.set CR0_PE_ON, 0x1 # protected mode enable flag
|
|
.set SMAP, 0x534d4150
|
|
|
|
# start address should be 0:7c00, in real mode, the beginning address of the running bootloader
|
|
.globl start
|
|
start:
|
|
.code16 # Assemble for 16-bit mode
|
|
cli # Disable interrupts
|
|
cld # String operations increment
|
|
|
|
# Set up the important data segment registers (DS, ES, SS).
|
|
xorw %ax, %ax # Segment number zero
|
|
movw %ax, %ds # -> Data Segment
|
|
movw %ax, %es # -> Extra Segment
|
|
movw %ax, %ss # -> Stack Segment
|
|
|
|
# Enable A20:
|
|
# For backwards compatibility with the earliest PCs, physical
|
|
# address line 20 is tied low, so that addresses higher than
|
|
# 1MB wrap around to zero by default. This code undoes this.
|
|
seta20.1:
|
|
inb $0x64, %al # Wait for not busy
|
|
testb $0x2, %al
|
|
jnz seta20.1
|
|
|
|
movb $0xd1, %al # 0xd1 -> port 0x64
|
|
outb %al, $0x64
|
|
|
|
seta20.2:
|
|
inb $0x64, %al # Wait for not busy
|
|
testb $0x2, %al
|
|
jnz seta20.2
|
|
|
|
movb $0xdf, %al # 0xdf -> port 0x60
|
|
outb %al, $0x60
|
|
|
|
probe_memory:
|
|
movl $0, 0x8000
|
|
xorl %ebx, %ebx
|
|
movw $0x8004, %di
|
|
start_probe:
|
|
movl $0xE820, %eax
|
|
movl $20, %ecx
|
|
movl $SMAP, %edx
|
|
int $0x15
|
|
jnc cont
|
|
movw $12345, 0x8000
|
|
jmp finish_probe
|
|
cont:
|
|
addw $20, %di
|
|
incl 0x8000
|
|
cmpl $0, %ebx
|
|
jnz start_probe
|
|
finish_probe:
|
|
|
|
# Switch from real to protected mode, using a bootstrap GDT
|
|
# and segment translation that makes virtual addresses
|
|
# identical to physical addresses, so that the
|
|
# effective memory map does not change during the switch.
|
|
lgdt gdtdesc
|
|
movl %cr0, %eax
|
|
orl $CR0_PE_ON, %eax
|
|
movl %eax, %cr0
|
|
|
|
# Jump to next instruction, but in 32-bit code segment.
|
|
# Switches processor into 32-bit mode.
|
|
ljmp $PROT_MODE_CSEG, $protcseg
|
|
|
|
.code32 # Assemble for 32-bit mode
|
|
protcseg:
|
|
# Set up the protected-mode data segment registers
|
|
movw $PROT_MODE_DSEG, %ax # Our data segment selector
|
|
movw %ax, %ds # -> DS: Data Segment
|
|
movw %ax, %es # -> ES: Extra Segment
|
|
movw %ax, %fs # -> FS
|
|
movw %ax, %gs # -> GS
|
|
movw %ax, %ss # -> SS: Stack Segment
|
|
|
|
# Set up the stack pointer and call into C. The stack region is from 0--start(0x7c00)
|
|
movl $0x0, %ebp
|
|
movl $start, %esp
|
|
call bootmain
|
|
|
|
# If bootmain returns (it shouldn't), loop.
|
|
spin:
|
|
jmp spin
|
|
|
|
.data
|
|
# Bootstrap GDT
|
|
.p2align 2 # force 4 byte alignment
|
|
gdt:
|
|
SEG_NULLASM # null seg
|
|
SEG_ASM(STA_X|STA_R, 0x0, 0xffffffff) # code seg for bootloader and kernel
|
|
SEG_ASM(STA_W, 0x0, 0xffffffff) # data seg for bootloader and kernel
|
|
|
|
gdtdesc:
|
|
.word 0x17 # sizeof(gdt) - 1
|
|
.long gdt # address gdt
|