#include #include #include #include #include #include #include #include #include #include /* * * Task State Segment: * * The TSS may reside anywhere in memory. A special segment register called * the Task Register (TR) holds a segment selector that points a valid TSS * segment descriptor which resides in the GDT. Therefore, to use a TSS * the following must be done in function gdt_init: * - create a TSS descriptor entry in GDT * - add enough information to the TSS in memory as needed * - load the TR register with a segment selector for that segment * * There are several fileds in TSS for specifying the new stack pointer when a * privilege level change happens. But only the fields SS0 and ESP0 are useful * in our os kernel. * * The field SS0 contains the stack segment selector for CPL = 0, and the ESP0 * contains the new ESP value for CPL = 0. When an interrupt happens in protected * mode, the x86 CPU will look in the TSS for SS0 and ESP0 and load their value * into SS and ESP respectively. * */ static struct taskstate ts = {0}; // virtual address of physicall page array struct Page *pages; // amount of physical memory (in pages) size_t npage = 0; // virtual address of boot-time page directory pde_t *boot_pgdir = NULL; // physical address of boot-time page directory uintptr_t boot_cr3; // physical memory management const struct pmm_manager *pmm_manager; /* * * The page directory entry corresponding to the virtual address range * [VPT, VPT + PTSIZE) points to the page directory itself. Thus, the page * directory is treated as a page table as well as a page directory. * * One result of treating the page directory as a page table is that all PTEs * can be accessed though a "virtual page table" at virtual address VPT. And the * PTE for number n is stored in vpt[n]. * * A second consequence is that the contents of the current page directory will * always available at virtual address PGADDR(PDX(VPT), PDX(VPT), 0), to which * vpd is set bellow. * */ pte_t * const vpt = (pte_t *)VPT; pde_t * const vpd = (pde_t *)PGADDR(PDX(VPT), PDX(VPT), 0); /* * * Global Descriptor Table: * * The kernel and user segments are identical (except for the DPL). To load * the %ss register, the CPL must equal the DPL. Thus, we must duplicate the * segments for the user and the kernel. Defined as follows: * - 0x0 : unused (always faults -- for trapping NULL far pointers) * - 0x8 : kernel code segment * - 0x10: kernel data segment * - 0x18: user code segment * - 0x20: user data segment * - 0x28: defined for tss, initialized in gdt_init * */ static struct segdesc gdt[] = { SEG_NULL, [SEG_KTEXT] = SEG(STA_X | STA_R, 0x0, 0xFFFFFFFF, DPL_KERNEL), [SEG_KDATA] = SEG(STA_W, 0x0, 0xFFFFFFFF, DPL_KERNEL), [SEG_UTEXT] = SEG(STA_X | STA_R, 0x0, 0xFFFFFFFF, DPL_USER), [SEG_UDATA] = SEG(STA_W, 0x0, 0xFFFFFFFF, DPL_USER), [SEG_TSS] = SEG_NULL, }; static struct pseudodesc gdt_pd = { sizeof(gdt) - 1, (uintptr_t)gdt }; static void check_alloc_page(void); static void check_pgdir(void); static void check_boot_pgdir(void); /* * * lgdt - load the global descriptor table register and reset the * data/code segement registers for kernel. * */ static inline void lgdt(struct pseudodesc *pd) { asm volatile ("lgdt (%0)" :: "r" (pd)); asm volatile ("movw %%ax, %%gs" :: "a" (USER_DS)); asm volatile ("movw %%ax, %%fs" :: "a" (USER_DS)); asm volatile ("movw %%ax, %%es" :: "a" (KERNEL_DS)); asm volatile ("movw %%ax, %%ds" :: "a" (KERNEL_DS)); asm volatile ("movw %%ax, %%ss" :: "a" (KERNEL_DS)); // reload cs asm volatile ("ljmp %0, $1f\n 1:\n" :: "i" (KERNEL_CS)); } /* * * load_esp0 - change the ESP0 in default task state segment, * so that we can use different kernel stack when we trap frame * user to kernel. * */ void load_esp0(uintptr_t esp0) { ts.ts_esp0 = esp0; } /* gdt_init - initialize the default GDT and TSS */ static void gdt_init(void) { // set boot kernel stack and default SS0 load_esp0((uintptr_t)bootstacktop); ts.ts_ss0 = KERNEL_DS; // initialize the TSS filed of the gdt gdt[SEG_TSS] = SEGTSS(STS_T32A, (uintptr_t)&ts, sizeof(ts), DPL_KERNEL); // reload all segment registers lgdt(&gdt_pd); // load the TSS ltr(GD_TSS); } //init_pmm_manager - initialize a pmm_manager instance static void init_pmm_manager(void) { pmm_manager = &default_pmm_manager; cprintf("memory management: %s\n", pmm_manager->name); pmm_manager->init(); } //init_memmap - call pmm->init_memmap to build Page struct for free memory static void init_memmap(struct Page *base, size_t n) { pmm_manager->init_memmap(base, n); } //alloc_pages - call pmm->alloc_pages to allocate a continuous n*PAGESIZE memory struct Page * alloc_pages(size_t n) { struct Page *page=NULL; bool intr_flag; local_intr_save(intr_flag); { page = pmm_manager->alloc_pages(n); } local_intr_restore(intr_flag); return page; } //free_pages - call pmm->free_pages to free a continuous n*PAGESIZE memory void free_pages(struct Page *base, size_t n) { bool intr_flag; local_intr_save(intr_flag); { pmm_manager->free_pages(base, n); } local_intr_restore(intr_flag); } //nr_free_pages - call pmm->nr_free_pages to get the size (nr*PAGESIZE) //of current free memory size_t nr_free_pages(void) { size_t ret; bool intr_flag; local_intr_save(intr_flag); { ret = pmm_manager->nr_free_pages(); } local_intr_restore(intr_flag); return ret; } /* pmm_init - initialize the physical memory management */ static void page_init(void) { struct e820map *memmap = (struct e820map *)(0x8000 + KERNBASE); uint64_t maxpa = 0; cprintf("e820map:\n"); int i; for (i = 0; i < memmap->nr_map; i ++) { uint64_t begin = memmap->map[i].addr, end = begin + memmap->map[i].size; cprintf(" memory: %08llx, [%08llx, %08llx], type = %d.\n", memmap->map[i].size, begin, end - 1, memmap->map[i].type); if (memmap->map[i].type == E820_ARM) { if (maxpa < end && begin < KMEMSIZE) { maxpa = end; } } } if (maxpa > KMEMSIZE) { maxpa = KMEMSIZE; } extern char end[]; npage = maxpa / PGSIZE; pages = (struct Page *)ROUNDUP((void *)end, PGSIZE); for (i = 0; i < npage; i ++) { SetPageReserved(pages + i); } uintptr_t freemem = PADDR((uintptr_t)pages + sizeof(struct Page) * npage); for (i = 0; i < memmap->nr_map; i ++) { uint64_t begin = memmap->map[i].addr, end = begin + memmap->map[i].size; if (memmap->map[i].type == E820_ARM) { if (begin < freemem) { begin = freemem; } if (end > KMEMSIZE) { end = KMEMSIZE; } if (begin < end) { begin = ROUNDUP(begin, PGSIZE); end = ROUNDDOWN(end, PGSIZE); if (begin < end) { init_memmap(pa2page(begin), (end - begin) / PGSIZE); } } } } } static void enable_paging(void) { lcr3(boot_cr3); // turn on paging uint32_t cr0 = rcr0(); cr0 |= CR0_PE | CR0_PG | CR0_AM | CR0_WP | CR0_NE | CR0_TS | CR0_EM | CR0_MP; cr0 &= ~(CR0_TS | CR0_EM); lcr0(cr0); } //boot_map_segment - setup&enable the paging mechanism // parameters // la: linear address of this memory need to map (after x86 segment map) // size: memory size // pa: physical address of this memory // perm: permission of this memory static void boot_map_segment(pde_t *pgdir, uintptr_t la, size_t size, uintptr_t pa, uint32_t perm) { assert(PGOFF(la) == PGOFF(pa)); size_t n = ROUNDUP(size + PGOFF(la), PGSIZE) / PGSIZE; la = ROUNDDOWN(la, PGSIZE); pa = ROUNDDOWN(pa, PGSIZE); for (; n > 0; n --, la += PGSIZE, pa += PGSIZE) { pte_t *ptep = get_pte(pgdir, la, 1); assert(ptep != NULL); *ptep = pa | PTE_P | perm; } } //boot_alloc_page - allocate one page using pmm->alloc_pages(1) // return value: the kernel virtual address of this allocated page //note: this function is used to get the memory for PDT(Page Directory Table)&PT(Page Table) static void * boot_alloc_page(void) { struct Page *p = alloc_page(); if (p == NULL) { panic("boot_alloc_page failed.\n"); } return page2kva(p); } //pmm_init - setup a pmm to manage physical memory, build PDT&PT to setup paging mechanism // - check the correctness of pmm & paging mechanism, print PDT&PT void pmm_init(void) { //We need to alloc/free the physical memory (granularity is 4KB or other size). //So a framework of physical memory manager (struct pmm_manager)is defined in pmm.h //First we should init a physical memory manager(pmm) based on the framework. //Then pmm can alloc/free the physical memory. //Now the first_fit/best_fit/worst_fit/buddy_system pmm are available. init_pmm_manager(); // detect physical memory space, reserve already used memory, // then use pmm->init_memmap to create free page list page_init(); //use pmm->check to verify the correctness of the alloc/free function in a pmm check_alloc_page(); // create boot_pgdir, an initial page directory(Page Directory Table, PDT) boot_pgdir = boot_alloc_page(); memset(boot_pgdir, 0, PGSIZE); boot_cr3 = PADDR(boot_pgdir); check_pgdir(); static_assert(KERNBASE % PTSIZE == 0 && KERNTOP % PTSIZE == 0); // recursively insert boot_pgdir in itself // to form a virtual page table at virtual address VPT boot_pgdir[PDX(VPT)] = PADDR(boot_pgdir) | PTE_P | PTE_W; // map all physical memory to linear memory with base linear addr KERNBASE //linear_addr KERNBASE~KERNBASE+KMEMSIZE = phy_addr 0~KMEMSIZE //But shouldn't use this map until enable_paging() & gdt_init() finished. boot_map_segment(boot_pgdir, KERNBASE, KMEMSIZE, 0, PTE_W); //temporary map: //virtual_addr 3G~3G+4M = linear_addr 0~4M = linear_addr 3G~3G+4M = phy_addr 0~4M boot_pgdir[0] = boot_pgdir[PDX(KERNBASE)]; enable_paging(); //reload gdt(third time,the last time) to map all physical memory //virtual_addr 0~4G=liear_addr 0~4G //then set kernel stack(ss:esp) in TSS, setup TSS in gdt, load TSS gdt_init(); //disable the map of virtual_addr 0~4M boot_pgdir[0] = 0; //now the basic virtual memory map(see memalyout.h) is established. //check the correctness of the basic virtual memory map. check_boot_pgdir(); print_pgdir(); } //get_pte - get pte and return the kernel virtual address of this pte for la // - if the PT contians this pte didn't exist, alloc a page for PT // parameter: // pgdir: the kernel virtual base address of PDT // la: the linear address need to map // create: a logical value to decide if alloc a page for PT // return vaule: the kernel virtual address of this pte pte_t * get_pte(pde_t *pgdir, uintptr_t la, bool create) { /* LAB2 EXERCISE 2: YOUR CODE * * If you need to visit a physical address, please use KADDR() * please read pmm.h for useful macros * * Maybe you want help comment, BELOW comments can help you finish the code * * Some Useful MACROs and DEFINEs, you can use them in below implementation. * MACROs or Functions: * PDX(la) = the index of page directory entry of VIRTUAL ADDRESS la. * KADDR(pa) : takes a physical address and returns the corresponding kernel virtual address. * set_page_ref(page,1) : means the page be referenced by one time * page2pa(page): get the physical address of memory which this (struct Page *) page manages * struct Page * alloc_page() : allocation a page * memset(void *s, char c, size_t n) : sets the first n bytes of the memory area pointed by s * to the specified value c. * DEFINEs: * PTE_P 0x001 // page table/directory entry flags bit : Present * PTE_W 0x002 // page table/directory entry flags bit : Writeable * PTE_U 0x004 // page table/directory entry flags bit : User can access */ #if 0 pde_t *pdep = NULL; // (1) find page directory entry if (0) { // (2) check if entry is not present // (3) check if creating is needed, then alloc page for page table // CAUTION: this page is used for page table, not for common data page // (4) set page reference uintptr_t pa = 0; // (5) get linear address of page // (6) clear page content using memset // (7) set page directory entry's permission } return NULL; // (8) return page table entry #endif } //get_page - get related Page struct for linear address la using PDT pgdir struct Page * get_page(pde_t *pgdir, uintptr_t la, pte_t **ptep_store) { pte_t *ptep = get_pte(pgdir, la, 0); if (ptep_store != NULL) { *ptep_store = ptep; } if (ptep != NULL && *ptep & PTE_P) { return pte2page(*ptep); } return NULL; } //page_remove_pte - free an Page sturct which is related linear address la // - and clean(invalidate) pte which is related linear address la //note: PT is changed, so the TLB need to be invalidate static inline void page_remove_pte(pde_t *pgdir, uintptr_t la, pte_t *ptep) { /* LAB2 EXERCISE 3: YOUR CODE * * Please check if ptep is valid, and tlb must be manually updated if mapping is updated * * Maybe you want help comment, BELOW comments can help you finish the code * * Some Useful MACROs and DEFINEs, you can use them in below implementation. * MACROs or Functions: * struct Page *page pte2page(*ptep): get the according page from the value of a ptep * free_page : free a page * page_ref_dec(page) : decrease page->ref. NOTICE: ff page->ref == 0 , then this page should be free. * tlb_invalidate(pde_t *pgdir, uintptr_t la) : Invalidate a TLB entry, but only if the page tables being * edited are the ones currently in use by the processor. * DEFINEs: * PTE_P 0x001 // page table/directory entry flags bit : Present */ #if 0 if (0) { //(1) check if this page table entry is present struct Page *page = NULL; //(2) find corresponding page to pte //(3) decrease page reference //(4) and free this page when page reference reachs 0 //(5) clear second page table entry //(6) flush tlb } #endif } //page_remove - free an Page which is related linear address la and has an validated pte void page_remove(pde_t *pgdir, uintptr_t la) { pte_t *ptep = get_pte(pgdir, la, 0); if (ptep != NULL) { page_remove_pte(pgdir, la, ptep); } } //page_insert - build the map of phy addr of an Page with the linear addr la // paramemters: // pgdir: the kernel virtual base address of PDT // page: the Page which need to map // la: the linear address need to map // perm: the permission of this Page which is setted in related pte // return value: always 0 //note: PT is changed, so the TLB need to be invalidate int page_insert(pde_t *pgdir, struct Page *page, uintptr_t la, uint32_t perm) { pte_t *ptep = get_pte(pgdir, la, 1); if (ptep == NULL) { return -E_NO_MEM; } page_ref_inc(page); if (*ptep & PTE_P) { struct Page *p = pte2page(*ptep); if (p == page) { page_ref_dec(page); } else { page_remove_pte(pgdir, la, ptep); } } *ptep = page2pa(page) | PTE_P | perm; tlb_invalidate(pgdir, la); return 0; } // invalidate a TLB entry, but only if the page tables being // edited are the ones currently in use by the processor. void tlb_invalidate(pde_t *pgdir, uintptr_t la) { if (rcr3() == PADDR(pgdir)) { invlpg((void *)la); } } static void check_alloc_page(void) { pmm_manager->check(); cprintf("check_alloc_page() succeeded!\n"); } static void check_pgdir(void) { assert(npage <= KMEMSIZE / PGSIZE); assert(boot_pgdir != NULL && (uint32_t)PGOFF(boot_pgdir) == 0); assert(get_page(boot_pgdir, 0x0, NULL) == NULL); struct Page *p1, *p2; p1 = alloc_page(); assert(page_insert(boot_pgdir, p1, 0x0, 0) == 0); pte_t *ptep; assert((ptep = get_pte(boot_pgdir, 0x0, 0)) != NULL); assert(pte2page(*ptep) == p1); assert(page_ref(p1) == 1); ptep = &((pte_t *)KADDR(PDE_ADDR(boot_pgdir[0])))[1]; assert(get_pte(boot_pgdir, PGSIZE, 0) == ptep); p2 = alloc_page(); assert(page_insert(boot_pgdir, p2, PGSIZE, PTE_U | PTE_W) == 0); assert((ptep = get_pte(boot_pgdir, PGSIZE, 0)) != NULL); assert(*ptep & PTE_U); assert(*ptep & PTE_W); assert(boot_pgdir[0] & PTE_U); assert(page_ref(p2) == 1); assert(page_insert(boot_pgdir, p1, PGSIZE, 0) == 0); assert(page_ref(p1) == 2); assert(page_ref(p2) == 0); assert((ptep = get_pte(boot_pgdir, PGSIZE, 0)) != NULL); assert(pte2page(*ptep) == p1); assert((*ptep & PTE_U) == 0); page_remove(boot_pgdir, 0x0); assert(page_ref(p1) == 1); assert(page_ref(p2) == 0); page_remove(boot_pgdir, PGSIZE); assert(page_ref(p1) == 0); assert(page_ref(p2) == 0); assert(page_ref(pde2page(boot_pgdir[0])) == 1); free_page(pde2page(boot_pgdir[0])); boot_pgdir[0] = 0; cprintf("check_pgdir() succeeded!\n"); } static void check_boot_pgdir(void) { pte_t *ptep; int i; for (i = 0; i < npage; i += PGSIZE) { assert((ptep = get_pte(boot_pgdir, (uintptr_t)KADDR(i), 0)) != NULL); assert(PTE_ADDR(*ptep) == i); } assert(PDE_ADDR(boot_pgdir[PDX(VPT)]) == PADDR(boot_pgdir)); assert(boot_pgdir[0] == 0); struct Page *p; p = alloc_page(); assert(page_insert(boot_pgdir, p, 0x100, PTE_W) == 0); assert(page_ref(p) == 1); assert(page_insert(boot_pgdir, p, 0x100 + PGSIZE, PTE_W) == 0); assert(page_ref(p) == 2); const char *str = "ucore: Hello world!!"; strcpy((void *)0x100, str); assert(strcmp((void *)0x100, (void *)(0x100 + PGSIZE)) == 0); *(char *)(page2kva(p) + 0x100) = '\0'; assert(strlen((const char *)0x100) == 0); free_page(p); free_page(pde2page(boot_pgdir[0])); boot_pgdir[0] = 0; cprintf("check_boot_pgdir() succeeded!\n"); } //perm2str - use string 'u,r,w,-' to present the permission static const char * perm2str(int perm) { static char str[4]; str[0] = (perm & PTE_U) ? 'u' : '-'; str[1] = 'r'; str[2] = (perm & PTE_W) ? 'w' : '-'; str[3] = '\0'; return str; } //get_pgtable_items - In [left, right] range of PDT or PT, find a continuous linear addr space // - (left_store*X_SIZE~right_store*X_SIZE) for PDT or PT // - X_SIZE=PTSIZE=4M, if PDT; X_SIZE=PGSIZE=4K, if PT // paramemters: // left: no use ??? // right: the high side of table's range // start: the low side of table's range // table: the beginning addr of table // left_store: the pointer of the high side of table's next range // right_store: the pointer of the low side of table's next range // return value: 0 - not a invalid item range, perm - a valid item range with perm permission static int get_pgtable_items(size_t left, size_t right, size_t start, uintptr_t *table, size_t *left_store, size_t *right_store) { if (start >= right) { return 0; } while (start < right && !(table[start] & PTE_P)) { start ++; } if (start < right) { if (left_store != NULL) { *left_store = start; } int perm = (table[start ++] & PTE_USER); while (start < right && (table[start] & PTE_USER) == perm) { start ++; } if (right_store != NULL) { *right_store = start; } return perm; } return 0; } //print_pgdir - print the PDT&PT void print_pgdir(void) { cprintf("-------------------- BEGIN --------------------\n"); size_t left, right = 0, perm; while ((perm = get_pgtable_items(0, NPDEENTRY, right, vpd, &left, &right)) != 0) { cprintf("PDE(%03x) %08x-%08x %08x %s\n", right - left, left * PTSIZE, right * PTSIZE, (right - left) * PTSIZE, perm2str(perm)); size_t l, r = left * NPTEENTRY; while ((perm = get_pgtable_items(left * NPTEENTRY, right * NPTEENTRY, r, vpt, &l, &r)) != 0) { cprintf(" |-- PTE(%05x) %08x-%08x %08x %s\n", r - l, l * PGSIZE, r * PGSIZE, (r - l) * PGSIZE, perm2str(perm)); } } cprintf("--------------------- END ---------------------\n"); }