《操作系统》的实验代码。
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

759 lines
26 KiB

12 years ago
  1. #include <defs.h>
  2. #include <x86.h>
  3. #include <stdio.h>
  4. #include <string.h>
  5. #include <mmu.h>
  6. #include <memlayout.h>
  7. #include <pmm.h>
  8. #include <default_pmm.h>
  9. #include <sync.h>
  10. #include <error.h>
  11. #include <swap.h>
  12. #include <vmm.h>
  13. #include <kmalloc.h>
  14. /* *
  15. * Task State Segment:
  16. *
  17. * The TSS may reside anywhere in memory. A special segment register called
  18. * the Task Register (TR) holds a segment selector that points a valid TSS
  19. * segment descriptor which resides in the GDT. Therefore, to use a TSS
  20. * the following must be done in function gdt_init:
  21. * - create a TSS descriptor entry in GDT
  22. * - add enough information to the TSS in memory as needed
  23. * - load the TR register with a segment selector for that segment
  24. *
  25. * There are several fileds in TSS for specifying the new stack pointer when a
  26. * privilege level change happens. But only the fields SS0 and ESP0 are useful
  27. * in our os kernel.
  28. *
  29. * The field SS0 contains the stack segment selector for CPL = 0, and the ESP0
  30. * contains the new ESP value for CPL = 0. When an interrupt happens in protected
  31. * mode, the x86 CPU will look in the TSS for SS0 and ESP0 and load their value
  32. * into SS and ESP respectively.
  33. * */
  34. static struct taskstate ts = {0};
  35. // virtual address of physicall page array
  36. struct Page *pages;
  37. // amount of physical memory (in pages)
  38. size_t npage = 0;
  39. // virtual address of boot-time page directory
  40. pde_t *boot_pgdir = NULL;
  41. // physical address of boot-time page directory
  42. uintptr_t boot_cr3;
  43. // physical memory management
  44. const struct pmm_manager *pmm_manager;
  45. /* *
  46. * The page directory entry corresponding to the virtual address range
  47. * [VPT, VPT + PTSIZE) points to the page directory itself. Thus, the page
  48. * directory is treated as a page table as well as a page directory.
  49. *
  50. * One result of treating the page directory as a page table is that all PTEs
  51. * can be accessed though a "virtual page table" at virtual address VPT. And the
  52. * PTE for number n is stored in vpt[n].
  53. *
  54. * A second consequence is that the contents of the current page directory will
  55. * always available at virtual address PGADDR(PDX(VPT), PDX(VPT), 0), to which
  56. * vpd is set bellow.
  57. * */
  58. pte_t * const vpt = (pte_t *)VPT;
  59. pde_t * const vpd = (pde_t *)PGADDR(PDX(VPT), PDX(VPT), 0);
  60. /* *
  61. * Global Descriptor Table:
  62. *
  63. * The kernel and user segments are identical (except for the DPL). To load
  64. * the %ss register, the CPL must equal the DPL. Thus, we must duplicate the
  65. * segments for the user and the kernel. Defined as follows:
  66. * - 0x0 : unused (always faults -- for trapping NULL far pointers)
  67. * - 0x8 : kernel code segment
  68. * - 0x10: kernel data segment
  69. * - 0x18: user code segment
  70. * - 0x20: user data segment
  71. * - 0x28: defined for tss, initialized in gdt_init
  72. * */
  73. static struct segdesc gdt[] = {
  74. SEG_NULL,
  75. [SEG_KTEXT] = SEG(STA_X | STA_R, 0x0, 0xFFFFFFFF, DPL_KERNEL),
  76. [SEG_KDATA] = SEG(STA_W, 0x0, 0xFFFFFFFF, DPL_KERNEL),
  77. [SEG_UTEXT] = SEG(STA_X | STA_R, 0x0, 0xFFFFFFFF, DPL_USER),
  78. [SEG_UDATA] = SEG(STA_W, 0x0, 0xFFFFFFFF, DPL_USER),
  79. [SEG_TSS] = SEG_NULL,
  80. };
  81. static struct pseudodesc gdt_pd = {
  82. sizeof(gdt) - 1, (uintptr_t)gdt
  83. };
  84. static void check_alloc_page(void);
  85. static void check_pgdir(void);
  86. static void check_boot_pgdir(void);
  87. /* *
  88. * lgdt - load the global descriptor table register and reset the
  89. * data/code segement registers for kernel.
  90. * */
  91. static inline void
  92. lgdt(struct pseudodesc *pd) {
  93. asm volatile ("lgdt (%0)" :: "r" (pd));
  94. asm volatile ("movw %%ax, %%gs" :: "a" (USER_DS));
  95. asm volatile ("movw %%ax, %%fs" :: "a" (USER_DS));
  96. asm volatile ("movw %%ax, %%es" :: "a" (KERNEL_DS));
  97. asm volatile ("movw %%ax, %%ds" :: "a" (KERNEL_DS));
  98. asm volatile ("movw %%ax, %%ss" :: "a" (KERNEL_DS));
  99. // reload cs
  100. asm volatile ("ljmp %0, $1f\n 1:\n" :: "i" (KERNEL_CS));
  101. }
  102. /* *
  103. * load_esp0 - change the ESP0 in default task state segment,
  104. * so that we can use different kernel stack when we trap frame
  105. * user to kernel.
  106. * */
  107. void
  108. load_esp0(uintptr_t esp0) {
  109. ts.ts_esp0 = esp0;
  110. }
  111. /* gdt_init - initialize the default GDT and TSS */
  112. static void
  113. gdt_init(void) {
  114. // set boot kernel stack and default SS0
  115. load_esp0((uintptr_t)bootstacktop);
  116. ts.ts_ss0 = KERNEL_DS;
  117. // initialize the TSS filed of the gdt
  118. gdt[SEG_TSS] = SEGTSS(STS_T32A, (uintptr_t)&ts, sizeof(ts), DPL_KERNEL);
  119. // reload all segment registers
  120. lgdt(&gdt_pd);
  121. // load the TSS
  122. ltr(GD_TSS);
  123. }
  124. //init_pmm_manager - initialize a pmm_manager instance
  125. static void
  126. init_pmm_manager(void) {
  127. pmm_manager = &default_pmm_manager;
  128. cprintf("memory management: %s\n", pmm_manager->name);
  129. pmm_manager->init();
  130. }
  131. //init_memmap - call pmm->init_memmap to build Page struct for free memory
  132. static void
  133. init_memmap(struct Page *base, size_t n) {
  134. pmm_manager->init_memmap(base, n);
  135. }
  136. //alloc_pages - call pmm->alloc_pages to allocate a continuous n*PAGESIZE memory
  137. struct Page *
  138. alloc_pages(size_t n) {
  139. struct Page *page=NULL;
  140. bool intr_flag;
  141. while (1)
  142. {
  143. local_intr_save(intr_flag);
  144. {
  145. page = pmm_manager->alloc_pages(n);
  146. }
  147. local_intr_restore(intr_flag);
  148. if (page != NULL || n > 1 || swap_init_ok == 0) break;
  149. extern struct mm_struct *check_mm_struct;
  150. //cprintf("page %x, call swap_out in alloc_pages %d\n",page, n);
  151. swap_out(check_mm_struct, n, 0);
  152. }
  153. //cprintf("n %d,get page %x, No %d in alloc_pages\n",n,page,(page-pages));
  154. return page;
  155. }
  156. //free_pages - call pmm->free_pages to free a continuous n*PAGESIZE memory
  157. void
  158. free_pages(struct Page *base, size_t n) {
  159. bool intr_flag;
  160. local_intr_save(intr_flag);
  161. {
  162. pmm_manager->free_pages(base, n);
  163. }
  164. local_intr_restore(intr_flag);
  165. }
  166. //nr_free_pages - call pmm->nr_free_pages to get the size (nr*PAGESIZE)
  167. //of current free memory
  168. size_t
  169. nr_free_pages(void) {
  170. size_t ret;
  171. bool intr_flag;
  172. local_intr_save(intr_flag);
  173. {
  174. ret = pmm_manager->nr_free_pages();
  175. }
  176. local_intr_restore(intr_flag);
  177. return ret;
  178. }
  179. /* pmm_init - initialize the physical memory management */
  180. static void
  181. page_init(void) {
  182. struct e820map *memmap = (struct e820map *)(0x8000 + KERNBASE);
  183. uint64_t maxpa = 0;
  184. cprintf("e820map:\n");
  185. int i;
  186. for (i = 0; i < memmap->nr_map; i ++) {
  187. uint64_t begin = memmap->map[i].addr, end = begin + memmap->map[i].size;
  188. cprintf(" memory: %08llx, [%08llx, %08llx], type = %d.\n",
  189. memmap->map[i].size, begin, end - 1, memmap->map[i].type);
  190. if (memmap->map[i].type == E820_ARM) {
  191. if (maxpa < end && begin < KMEMSIZE) {
  192. maxpa = end;
  193. }
  194. }
  195. }
  196. if (maxpa > KMEMSIZE) {
  197. maxpa = KMEMSIZE;
  198. }
  199. extern char end[];
  200. npage = maxpa / PGSIZE;
  201. pages = (struct Page *)ROUNDUP((void *)end, PGSIZE);
  202. for (i = 0; i < npage; i ++) {
  203. SetPageReserved(pages + i);
  204. }
  205. uintptr_t freemem = PADDR((uintptr_t)pages + sizeof(struct Page) * npage);
  206. for (i = 0; i < memmap->nr_map; i ++) {
  207. uint64_t begin = memmap->map[i].addr, end = begin + memmap->map[i].size;
  208. if (memmap->map[i].type == E820_ARM) {
  209. if (begin < freemem) {
  210. begin = freemem;
  211. }
  212. if (end > KMEMSIZE) {
  213. end = KMEMSIZE;
  214. }
  215. if (begin < end) {
  216. begin = ROUNDUP(begin, PGSIZE);
  217. end = ROUNDDOWN(end, PGSIZE);
  218. if (begin < end) {
  219. init_memmap(pa2page(begin), (end - begin) / PGSIZE);
  220. }
  221. }
  222. }
  223. }
  224. }
  225. static void
  226. enable_paging(void) {
  227. lcr3(boot_cr3);
  228. // turn on paging
  229. uint32_t cr0 = rcr0();
  230. cr0 |= CR0_PE | CR0_PG | CR0_AM | CR0_WP | CR0_NE | CR0_TS | CR0_EM | CR0_MP;
  231. cr0 &= ~(CR0_TS | CR0_EM);
  232. lcr0(cr0);
  233. }
  234. //boot_map_segment - setup&enable the paging mechanism
  235. // parameters
  236. // la: linear address of this memory need to map (after x86 segment map)
  237. // size: memory size
  238. // pa: physical address of this memory
  239. // perm: permission of this memory
  240. static void
  241. boot_map_segment(pde_t *pgdir, uintptr_t la, size_t size, uintptr_t pa, uint32_t perm) {
  242. assert(PGOFF(la) == PGOFF(pa));
  243. size_t n = ROUNDUP(size + PGOFF(la), PGSIZE) / PGSIZE;
  244. la = ROUNDDOWN(la, PGSIZE);
  245. pa = ROUNDDOWN(pa, PGSIZE);
  246. for (; n > 0; n --, la += PGSIZE, pa += PGSIZE) {
  247. pte_t *ptep = get_pte(pgdir, la, 1);
  248. assert(ptep != NULL);
  249. *ptep = pa | PTE_P | perm;
  250. }
  251. }
  252. //boot_alloc_page - allocate one page using pmm->alloc_pages(1)
  253. // return value: the kernel virtual address of this allocated page
  254. //note: this function is used to get the memory for PDT(Page Directory Table)&PT(Page Table)
  255. static void *
  256. boot_alloc_page(void) {
  257. struct Page *p = alloc_page();
  258. if (p == NULL) {
  259. panic("boot_alloc_page failed.\n");
  260. }
  261. return page2kva(p);
  262. }
  263. //pmm_init - setup a pmm to manage physical memory, build PDT&PT to setup paging mechanism
  264. // - check the correctness of pmm & paging mechanism, print PDT&PT
  265. void
  266. pmm_init(void) {
  267. //We need to alloc/free the physical memory (granularity is 4KB or other size).
  268. //So a framework of physical memory manager (struct pmm_manager)is defined in pmm.h
  269. //First we should init a physical memory manager(pmm) based on the framework.
  270. //Then pmm can alloc/free the physical memory.
  271. //Now the first_fit/best_fit/worst_fit/buddy_system pmm are available.
  272. init_pmm_manager();
  273. // detect physical memory space, reserve already used memory,
  274. // then use pmm->init_memmap to create free page list
  275. page_init();
  276. //use pmm->check to verify the correctness of the alloc/free function in a pmm
  277. check_alloc_page();
  278. // create boot_pgdir, an initial page directory(Page Directory Table, PDT)
  279. boot_pgdir = boot_alloc_page();
  280. memset(boot_pgdir, 0, PGSIZE);
  281. boot_cr3 = PADDR(boot_pgdir);
  282. check_pgdir();
  283. static_assert(KERNBASE % PTSIZE == 0 && KERNTOP % PTSIZE == 0);
  284. // recursively insert boot_pgdir in itself
  285. // to form a virtual page table at virtual address VPT
  286. boot_pgdir[PDX(VPT)] = PADDR(boot_pgdir) | PTE_P | PTE_W;
  287. // map all physical memory to linear memory with base linear addr KERNBASE
  288. //linear_addr KERNBASE~KERNBASE+KMEMSIZE = phy_addr 0~KMEMSIZE
  289. //But shouldn't use this map until enable_paging() & gdt_init() finished.
  290. boot_map_segment(boot_pgdir, KERNBASE, KMEMSIZE, 0, PTE_W);
  291. //temporary map:
  292. //virtual_addr 3G~3G+4M = linear_addr 0~4M = linear_addr 3G~3G+4M = phy_addr 0~4M
  293. boot_pgdir[0] = boot_pgdir[PDX(KERNBASE)];
  294. enable_paging();
  295. //reload gdt(third time,the last time) to map all physical memory
  296. //virtual_addr 0~4G=liear_addr 0~4G
  297. //then set kernel stack(ss:esp) in TSS, setup TSS in gdt, load TSS
  298. gdt_init();
  299. //disable the map of virtual_addr 0~4M
  300. boot_pgdir[0] = 0;
  301. //now the basic virtual memory map(see memalyout.h) is established.
  302. //check the correctness of the basic virtual memory map.
  303. check_boot_pgdir();
  304. print_pgdir();
  305. kmalloc_init();
  306. }
  307. //get_pte - get pte and return the kernel virtual address of this pte for la
  308. // - if the PT contians this pte didn't exist, alloc a page for PT
  309. // parameter:
  310. // pgdir: the kernel virtual base address of PDT
  311. // la: the linear address need to map
  312. // create: a logical value to decide if alloc a page for PT
  313. // return vaule: the kernel virtual address of this pte
  314. pte_t *
  315. get_pte(pde_t *pgdir, uintptr_t la, bool create) {
  316. /* LAB2 EXERCISE 2: YOUR CODE
  317. *
  318. * If you need to visit a physical address, please use KADDR()
  319. * please read pmm.h for useful macros
  320. *
  321. * Maybe you want help comment, BELOW comments can help you finish the code
  322. *
  323. * Some Useful MACROs and DEFINEs, you can use them in below implementation.
  324. * MACROs or Functions:
  325. * PDX(la) = the index of page directory entry of VIRTUAL ADDRESS la.
  326. * KADDR(pa) : takes a physical address and returns the corresponding kernel virtual address.
  327. * set_page_ref(page,1) : means the page be referenced by one time
  328. * page2pa(page): get the physical address of memory which this (struct Page *) page manages
  329. * struct Page * alloc_page() : allocation a page
  330. * memset(void *s, char c, size_t n) : sets the first n bytes of the memory area pointed by s
  331. * to the specified value c.
  332. * DEFINEs:
  333. * PTE_P 0x001 // page table/directory entry flags bit : Present
  334. * PTE_W 0x002 // page table/directory entry flags bit : Writeable
  335. * PTE_U 0x004 // page table/directory entry flags bit : User can access
  336. */
  337. #if 0
  338. pde_t *pdep = NULL; // (1) find page directory entry
  339. if (0) { // (2) check if entry is not present
  340. // (3) check if creating is needed, then alloc page for page table
  341. // CAUTION: this page is used for page table, not for common data page
  342. // (4) set page reference
  343. uintptr_t pa = 0; // (5) get linear address of page
  344. // (6) clear page content using memset
  345. // (7) set page directory entry's permission
  346. }
  347. return NULL; // (8) return page table entry
  348. #endif
  349. }
  350. //get_page - get related Page struct for linear address la using PDT pgdir
  351. struct Page *
  352. get_page(pde_t *pgdir, uintptr_t la, pte_t **ptep_store) {
  353. pte_t *ptep = get_pte(pgdir, la, 0);
  354. if (ptep_store != NULL) {
  355. *ptep_store = ptep;
  356. }
  357. if (ptep != NULL && *ptep & PTE_P) {
  358. return pa2page(*ptep);
  359. }
  360. return NULL;
  361. }
  362. //page_remove_pte - free an Page sturct which is related linear address la
  363. // - and clean(invalidate) pte which is related linear address la
  364. //note: PT is changed, so the TLB need to be invalidate
  365. static inline void
  366. page_remove_pte(pde_t *pgdir, uintptr_t la, pte_t *ptep) {
  367. /* LAB2 EXERCISE 3: YOUR CODE
  368. *
  369. * Please check if ptep is valid, and tlb must be manually updated if mapping is updated
  370. *
  371. * Maybe you want help comment, BELOW comments can help you finish the code
  372. *
  373. * Some Useful MACROs and DEFINEs, you can use them in below implementation.
  374. * MACROs or Functions:
  375. * struct Page *page pte2page(*ptep): get the according page from the value of a ptep
  376. * free_page : free a page
  377. * page_ref_dec(page) : decrease page->ref. NOTICE: ff page->ref == 0 , then this page should be free.
  378. * tlb_invalidate(pde_t *pgdir, uintptr_t la) : Invalidate a TLB entry, but only if the page tables being
  379. * edited are the ones currently in use by the processor.
  380. * DEFINEs:
  381. * PTE_P 0x001 // page table/directory entry flags bit : Present
  382. */
  383. #if 0
  384. if (0) { //(1) check if page directory is present
  385. struct Page *page = NULL; //(2) find corresponding page to pte
  386. //(3) decrease page reference
  387. //(4) and free this page when page reference reachs 0
  388. //(5) clear second page table entry
  389. //(6) flush tlb
  390. }
  391. #endif
  392. }
  393. void
  394. unmap_range(pde_t *pgdir, uintptr_t start, uintptr_t end) {
  395. assert(start % PGSIZE == 0 && end % PGSIZE == 0);
  396. assert(USER_ACCESS(start, end));
  397. do {
  398. pte_t *ptep = get_pte(pgdir, start, 0);
  399. if (ptep == NULL) {
  400. start = ROUNDDOWN(start + PTSIZE, PTSIZE);
  401. continue ;
  402. }
  403. if (*ptep != 0) {
  404. page_remove_pte(pgdir, start, ptep);
  405. }
  406. start += PGSIZE;
  407. } while (start != 0 && start < end);
  408. }
  409. void
  410. exit_range(pde_t *pgdir, uintptr_t start, uintptr_t end) {
  411. assert(start % PGSIZE == 0 && end % PGSIZE == 0);
  412. assert(USER_ACCESS(start, end));
  413. start = ROUNDDOWN(start, PTSIZE);
  414. do {
  415. int pde_idx = PDX(start);
  416. if (pgdir[pde_idx] & PTE_P) {
  417. free_page(pde2page(pgdir[pde_idx]));
  418. pgdir[pde_idx] = 0;
  419. }
  420. start += PTSIZE;
  421. } while (start != 0 && start < end);
  422. }
  423. /* copy_range - copy content of memory (start, end) of one process A to another process B
  424. * @to: the addr of process B's Page Directory
  425. * @from: the addr of process A's Page Directory
  426. * @share: flags to indicate to dup OR share. We just use dup method, so it didn't be used.
  427. *
  428. * CALL GRAPH: copy_mm-->dup_mmap-->copy_range
  429. */
  430. int
  431. copy_range(pde_t *to, pde_t *from, uintptr_t start, uintptr_t end, bool share) {
  432. assert(start % PGSIZE == 0 && end % PGSIZE == 0);
  433. assert(USER_ACCESS(start, end));
  434. // copy content by page unit.
  435. do {
  436. //call get_pte to find process A's pte according to the addr start
  437. pte_t *ptep = get_pte(from, start, 0), *nptep;
  438. if (ptep == NULL) {
  439. start = ROUNDDOWN(start + PTSIZE, PTSIZE);
  440. continue ;
  441. }
  442. //call get_pte to find process B's pte according to the addr start. If pte is NULL, just alloc a PT
  443. if (*ptep & PTE_P) {
  444. if ((nptep = get_pte(to, start, 1)) == NULL) {
  445. return -E_NO_MEM;
  446. }
  447. uint32_t perm = (*ptep & PTE_USER);
  448. //get page from ptep
  449. struct Page *page = pte2page(*ptep);
  450. // alloc a page for process B
  451. struct Page *npage=alloc_page();
  452. assert(page!=NULL);
  453. assert(npage!=NULL);
  454. int ret=0;
  455. /* LAB5:EXERCISE2 YOUR CODE
  456. * replicate content of page to npage, build the map of phy addr of nage with the linear addr start
  457. *
  458. * Some Useful MACROs and DEFINEs, you can use them in below implementation.
  459. * MACROs or Functions:
  460. * page2kva(struct Page *page): return the kernel vritual addr of memory which page managed (SEE pmm.h)
  461. * page_insert: build the map of phy addr of an Page with the linear addr la
  462. * memcpy: typical memory copy function
  463. *
  464. * (1) find src_kvaddr: the kernel virtual address of page
  465. * (2) find dst_kvaddr: the kernel virtual address of npage
  466. * (3) memory copy from src_kvaddr to dst_kvaddr, size is PGSIZE
  467. * (4) build the map of phy addr of nage with the linear addr start
  468. */
  469. assert(ret == 0);
  470. }
  471. start += PGSIZE;
  472. } while (start != 0 && start < end);
  473. return 0;
  474. }
  475. //page_remove - free an Page which is related linear address la and has an validated pte
  476. void
  477. page_remove(pde_t *pgdir, uintptr_t la) {
  478. pte_t *ptep = get_pte(pgdir, la, 0);
  479. if (ptep != NULL) {
  480. page_remove_pte(pgdir, la, ptep);
  481. }
  482. }
  483. //page_insert - build the map of phy addr of an Page with the linear addr la
  484. // paramemters:
  485. // pgdir: the kernel virtual base address of PDT
  486. // page: the Page which need to map
  487. // la: the linear address need to map
  488. // perm: the permission of this Page which is setted in related pte
  489. // return value: always 0
  490. //note: PT is changed, so the TLB need to be invalidate
  491. int
  492. page_insert(pde_t *pgdir, struct Page *page, uintptr_t la, uint32_t perm) {
  493. pte_t *ptep = get_pte(pgdir, la, 1);
  494. if (ptep == NULL) {
  495. return -E_NO_MEM;
  496. }
  497. page_ref_inc(page);
  498. if (*ptep & PTE_P) {
  499. struct Page *p = pte2page(*ptep);
  500. if (p == page) {
  501. page_ref_dec(page);
  502. }
  503. else {
  504. page_remove_pte(pgdir, la, ptep);
  505. }
  506. }
  507. *ptep = page2pa(page) | PTE_P | perm;
  508. tlb_invalidate(pgdir, la);
  509. return 0;
  510. }
  511. // invalidate a TLB entry, but only if the page tables being
  512. // edited are the ones currently in use by the processor.
  513. void
  514. tlb_invalidate(pde_t *pgdir, uintptr_t la) {
  515. if (rcr3() == PADDR(pgdir)) {
  516. invlpg((void *)la);
  517. }
  518. }
  519. // pgdir_alloc_page - call alloc_page & page_insert functions to
  520. // - allocate a page size memory & setup an addr map
  521. // - pa<->la with linear address la and the PDT pgdir
  522. struct Page *
  523. pgdir_alloc_page(pde_t *pgdir, uintptr_t la, uint32_t perm) {
  524. struct Page *page = alloc_page();
  525. if (page != NULL) {
  526. if (page_insert(pgdir, page, la, perm) != 0) {
  527. free_page(page);
  528. return NULL;
  529. }
  530. if (swap_init_ok){
  531. if(check_mm_struct!=NULL) {
  532. swap_map_swappable(check_mm_struct, la, page, 0);
  533. page->pra_vaddr=la;
  534. assert(page_ref(page) == 1);
  535. //cprintf("get No. %d page: pra_vaddr %x, pra_link.prev %x, pra_link_next %x in pgdir_alloc_page\n", (page-pages), page->pra_vaddr,page->pra_page_link.prev, page->pra_page_link.next);
  536. }
  537. else { //now current is existed, should fix it in the future
  538. //swap_map_swappable(current->mm, la, page, 0);
  539. //page->pra_vaddr=la;
  540. //assert(page_ref(page) == 1);
  541. //panic("pgdir_alloc_page: no pages. now current is existed, should fix it in the future\n");
  542. }
  543. }
  544. }
  545. return page;
  546. }
  547. static void
  548. check_alloc_page(void) {
  549. pmm_manager->check();
  550. cprintf("check_alloc_page() succeeded!\n");
  551. }
  552. static void
  553. check_pgdir(void) {
  554. assert(npage <= KMEMSIZE / PGSIZE);
  555. assert(boot_pgdir != NULL && (uint32_t)PGOFF(boot_pgdir) == 0);
  556. assert(get_page(boot_pgdir, 0x0, NULL) == NULL);
  557. struct Page *p1, *p2;
  558. p1 = alloc_page();
  559. assert(page_insert(boot_pgdir, p1, 0x0, 0) == 0);
  560. pte_t *ptep;
  561. assert((ptep = get_pte(boot_pgdir, 0x0, 0)) != NULL);
  562. assert(pa2page(*ptep) == p1);
  563. assert(page_ref(p1) == 1);
  564. ptep = &((pte_t *)KADDR(PDE_ADDR(boot_pgdir[0])))[1];
  565. assert(get_pte(boot_pgdir, PGSIZE, 0) == ptep);
  566. p2 = alloc_page();
  567. assert(page_insert(boot_pgdir, p2, PGSIZE, PTE_U | PTE_W) == 0);
  568. assert((ptep = get_pte(boot_pgdir, PGSIZE, 0)) != NULL);
  569. assert(*ptep & PTE_U);
  570. assert(*ptep & PTE_W);
  571. assert(boot_pgdir[0] & PTE_U);
  572. assert(page_ref(p2) == 1);
  573. assert(page_insert(boot_pgdir, p1, PGSIZE, 0) == 0);
  574. assert(page_ref(p1) == 2);
  575. assert(page_ref(p2) == 0);
  576. assert((ptep = get_pte(boot_pgdir, PGSIZE, 0)) != NULL);
  577. assert(pa2page(*ptep) == p1);
  578. assert((*ptep & PTE_U) == 0);
  579. page_remove(boot_pgdir, 0x0);
  580. assert(page_ref(p1) == 1);
  581. assert(page_ref(p2) == 0);
  582. page_remove(boot_pgdir, PGSIZE);
  583. assert(page_ref(p1) == 0);
  584. assert(page_ref(p2) == 0);
  585. assert(page_ref(pa2page(boot_pgdir[0])) == 1);
  586. free_page(pa2page(boot_pgdir[0]));
  587. boot_pgdir[0] = 0;
  588. cprintf("check_pgdir() succeeded!\n");
  589. }
  590. static void
  591. check_boot_pgdir(void) {
  592. pte_t *ptep;
  593. int i;
  594. for (i = 0; i < npage; i += PGSIZE) {
  595. assert((ptep = get_pte(boot_pgdir, (uintptr_t)KADDR(i), 0)) != NULL);
  596. assert(PTE_ADDR(*ptep) == i);
  597. }
  598. assert(PDE_ADDR(boot_pgdir[PDX(VPT)]) == PADDR(boot_pgdir));
  599. assert(boot_pgdir[0] == 0);
  600. struct Page *p;
  601. p = alloc_page();
  602. assert(page_insert(boot_pgdir, p, 0x100, PTE_W) == 0);
  603. assert(page_ref(p) == 1);
  604. assert(page_insert(boot_pgdir, p, 0x100 + PGSIZE, PTE_W) == 0);
  605. assert(page_ref(p) == 2);
  606. const char *str = "ucore: Hello world!!";
  607. strcpy((void *)0x100, str);
  608. assert(strcmp((void *)0x100, (void *)(0x100 + PGSIZE)) == 0);
  609. *(char *)(page2kva(p) + 0x100) = '\0';
  610. assert(strlen((const char *)0x100) == 0);
  611. free_page(p);
  612. free_page(pa2page(PDE_ADDR(boot_pgdir[0])));
  613. boot_pgdir[0] = 0;
  614. cprintf("check_boot_pgdir() succeeded!\n");
  615. }
  616. //perm2str - use string 'u,r,w,-' to present the permission
  617. static const char *
  618. perm2str(int perm) {
  619. static char str[4];
  620. str[0] = (perm & PTE_U) ? 'u' : '-';
  621. str[1] = 'r';
  622. str[2] = (perm & PTE_W) ? 'w' : '-';
  623. str[3] = '\0';
  624. return str;
  625. }
  626. //get_pgtable_items - In [left, right] range of PDT or PT, find a continuous linear addr space
  627. // - (left_store*X_SIZE~right_store*X_SIZE) for PDT or PT
  628. // - X_SIZE=PTSIZE=4M, if PDT; X_SIZE=PGSIZE=4K, if PT
  629. // paramemters:
  630. // left: no use ???
  631. // right: the high side of table's range
  632. // start: the low side of table's range
  633. // table: the beginning addr of table
  634. // left_store: the pointer of the high side of table's next range
  635. // right_store: the pointer of the low side of table's next range
  636. // return value: 0 - not a invalid item range, perm - a valid item range with perm permission
  637. static int
  638. get_pgtable_items(size_t left, size_t right, size_t start, uintptr_t *table, size_t *left_store, size_t *right_store) {
  639. if (start >= right) {
  640. return 0;
  641. }
  642. while (start < right && !(table[start] & PTE_P)) {
  643. start ++;
  644. }
  645. if (start < right) {
  646. if (left_store != NULL) {
  647. *left_store = start;
  648. }
  649. int perm = (table[start ++] & PTE_USER);
  650. while (start < right && (table[start] & PTE_USER) == perm) {
  651. start ++;
  652. }
  653. if (right_store != NULL) {
  654. *right_store = start;
  655. }
  656. return perm;
  657. }
  658. return 0;
  659. }
  660. //print_pgdir - print the PDT&PT
  661. void
  662. print_pgdir(void) {
  663. cprintf("-------------------- BEGIN --------------------\n");
  664. size_t left, right = 0, perm;
  665. while ((perm = get_pgtable_items(0, NPDEENTRY, right, vpd, &left, &right)) != 0) {
  666. cprintf("PDE(%03x) %08x-%08x %08x %s\n", right - left,
  667. left * PTSIZE, right * PTSIZE, (right - left) * PTSIZE, perm2str(perm));
  668. size_t l, r = left * NPTEENTRY;
  669. while ((perm = get_pgtable_items(left * NPTEENTRY, right * NPTEENTRY, r, vpt, &l, &r)) != 0) {
  670. cprintf(" |-- PTE(%05x) %08x-%08x %08x %s\n", r - l,
  671. l * PGSIZE, r * PGSIZE, (r - l) * PGSIZE, perm2str(perm));
  672. }
  673. }
  674. cprintf("--------------------- END ---------------------\n");
  675. }